PORTOR LIGHTING PT-DLR-C-277 Series LED Retrofit Down Light Instruction Manual

PORTOR LIGHTING PT-DLR-C-277 Series LED Retrofit Down Light

Specifications

• Product Name: PT-DLR-C-277 Series
• Voltage: 120V-277V
• Models Available: PT-DLR-C-4I-10W-5CCT-277,PT-DLR-C-6I-15W-5CCT-277
• Power: 10W or 15W depending on model
• Color Temperature: 5CCT

Safety Precautions

Before starting the installation, read and understand all instructions completely. Ensure to turn off the electricity at the fuse or circuit breaker box before installing the fixture. All electrical connections must comply with N.E.C. or local electrical codes.

Assembly Instructions

1. Preparing for Installation: Disconnect electrical power before installing or servicing any part of the fixture.
2. FCC Compliance: The device complies with Part 15 of the FCC rules, ensuring it does not cause harmful interference and accepts any interference received.

Installation Steps

1. Step 1: Turn off the power. Remove the existing fixture if applicable. Cut the ceiling hole as per the provided table.
2. Step 2: Open the J-Box cover, install metal cable, and connect supply wires to fixture wires.
3. Step 3: Insert J-Box through the mounting hole, connect fixture power cable to J-Box, select desired lamp color with CCT switch.
4. Step 4: Push spring-loaded clips into mounting hole, insert fixture, release clips to secure to the ceiling.
5. Step 5: Turn on power, check if the fixture is working properly.

FAQ

1. Q: Can I install this product without consulting an electrician?
   A: It is recommended to consult a qualified electrician before installing the fixture to ensure proper installation and safety.
   Q: Can I change the color temperature of the light after installation?
   A: Yes, you can select the desired lamp color using the provided CCT switch after installation.

INSTALLATION INSTRUCTIONS

PT-DLR-C-277 SERIES
PT-DLR-C-4I-10W-5CCT-277 / PT-DLR-C-6I-15W-5CCT-277

CAUTION : RISK OF ELECTRIC SHOCK
DISCONNECT POWER BEFORE CONNECTING THE FIXTURE. FAIL TO DO SO MAY PERMANENTLY DAMAGE THE LEDS.

WARNING
DO NOT REMOVE OR ATTEMPT TO REMOVE LEDS.

SAFETY PRECAUTIONS

FOR SAFETY, READ AND UNDERSTAND INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION. ELECTRICITY SHOULD BE TURNED OFF AT THE FUSE OR THE CIRCUIT BREAKER BOX BEFORE INSTALLING THE FIXTURE. ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH N. E. C. OR YOUR LOCAL CODE.

ASSEMBLY INSTRUCTIONS

1. PREPARING FOR INSTALLATION: DISCONNECT ELECTRICAL POWER BEFORE INSTALLING OR SERVICING ANY PART OF THIS FIXTURE.
2. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING THAT MAY CAUSE UNDESIRED OPERATION.

PACKAGE CONTENTS

INSTALLATION ( CONSULT A QUALIFIED ELECTRICIAN BEFORE INSTALLING )

1. STEP 1
   Turn off the power before installation. Remove the existing fixture if applicable. Determine the location and necessary hole cutout diameter using the supplied table and cut the ceiling hole with the listed approximate diameter, see Fig 1.

2. STEP 2
   Open the J-Box cover and remove the appropriate knockout(s) on the side panel. Install the appropriate metal cable ( not included ) and insert the electrical supply cable through the metal cable. Connect the supply wires to the fixture wires by using 3 wire nuts. Attach white to white, black to black, green to the ground wire, see Fig 2.
   

3. STEP 3
   Insert J-Box through the mounting hole and secure it, connect the fixture power cable to the J-Box. Select lamp color desired with the CCT switch,, see Fig 3.

4. STEP 4
   Push the spring-loaded clips into the mounting hole upwards and insert the fixture into it. Release the clips and the fixture will be pulled flush to the ceiling, see Fig 4.
   

5. STEP 5
   Turn on the power after installation, check the fixture can work well, see Fig

www.portorlighting.com Specification subject to change without notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>