Ruijie 1267 Mbps Wall Mounted Access Point User Manual

June 17, 2024
RuiJie

Ruijie-logo

Ruijie 1267 Mbps Wall Mounted Access Point

Ruijie-1267-Mbps-Wall-Mounted-Access-Point-product-
image

User Manual

Packing List

Item Name Quantity Unit
1 Host 1 Set
2 User Manual 1 Copy
3 Warranty card 1 Copy
4 Mounting Screw 2 Piece

Appearance and Interface

Top View

Note:

  1. System LED indicator
  2. LAN port
  3. Reset button

RearView

Note:
1 WAN/PoE Port

When powering 1he AP through PoE, connect one end of 1he Ethernet cable to the WAN/PoE port and the other end to a PoE-capable device.

LED Indicator and Button

LED Indicator and Button Frequency Description
LED Indicator Solid blue Normal operation.
Off The AP not receiving power.
Blinking(0.5Hz) Normal operation, but the AP is not connected to Ruijie

Cloud.
Fast blinking(10Hz)| Possible cases:

  1. Restoring the factory settings
  2. Upgrading the firmware
  3. Restoring the image file
  4. Initializing the device

Reset Button| Press for less than2 seconds| Restart the device.
Press for more than 5 seconds| Restore the factory settings.

Product Installation

  1. Loosen screws on the 86-type faceplate that is mounted on the wall.
  2. Connect the Ethernet cable to the WAN/PoE port.
  3. Align screw holes on both sides of the device over those on the faceplate. And then tighten screws with a screwdriver.
  4. Install the plate cover in the way as shown in the figure.

Network Configuration

  1. Method 1 (Recommended)
    Scan the QR-code on the manual or device to download Ruijie Reyee App, and configure the network according to App.

  2. Method 2
    Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and @Ruijie-sxxxx when there is only one device), or connect the cable with LAN port, and visit http://10.44.77.253 (default password: admin). It is recommended to configure the IP address as 10.44.77.250.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals