ECG AF 8300 Dual Fry Hot Air Fryer Instruction Manual

ECG AF 8300 Dual Fry Hot Air Fryer

Specifications

• Appliance Model : AF 8300 DualFry
• Frying Pan Capacity : 5.5 liters
• Touch Panel : Yes, with display
• Insulated Handles : Yes
• Grids Included : Yes

Product Usage Instructions

Safety Instructions

1. Ensure voltage compatibility and proper grounding of the appliance.
2. Avoid using the appliance in specific scenarios like damaged power cords or unusual sounds.
3. During the first use, allow for 15 minutes of operation without food to burn off protective coatings.
4. Always disconnect from mains before moving, cleaning, or prolonged non-use.
5. Avoid direct contact with water and liquids to prevent electric shock.
6. Do not use it outdoors or in humid environments.
7. Avoid placing near flammable materials or heat sources.

General Usage

1. Ensure proper installation and voltage compatibility.
2. Use the touch panel to operate the appliance.
3. Utilize the frying pan with a glass window for cooking.
4. Clean the appliance after each use following the manufacturer’s guidelines
5. Store the appliance in a dry and safe location when not in use.

Cleaning and Maintenance

1. Allow the appliance to cool down before cleaning.
2. Use a damp cloth to clean the exterior of the appliance.
3. Remove food residues from the frying pan and grids after each use.
4. Regularly check for any signs of damage and wear.

FAQ

• Q: Can I use the appliance outdoors?
  • A : No, the appliance should not be used outdoors or in humid environments to avoid electric shock risks.
• Q: How do I clean the frying pan with a glass window?
  • A : Allow the pan to cool down, then wash it with warm soapy water and a soft sponge. Do not use abrasive cleaners.

Always read the safety instructions carefully before using your appliance for the first time. The user´s manual must be always included.

DESCRIPTION

1. Appliance body
2. Touch panel with display
3. Frying pan with glass window
4. Frying pan 3.5 l
5. Insulated handles
6. Grids

Items not pictured (at the back of the appliance):

• Vent for hot air outlet
• Power cable

HOT AIR FRYER

SAFETY INSTRUCTIONS

Read carefully and save for future use!

Warning : The safety measures and instructions, contained in this manual, do not include all conditions and situations possible. The user must understand that common sense, caution and care are factors that cannot be integrated into any product. Therefore, these factors shall be ensured by the user/s using and operating this appliance. We are not liable for damages caused during shipping, by incorrect use, voltage fluctuation or the modification or adjustment of any part of the appliance. To protect against a risk of fire or electric shock, basic precautions shall be taken while using electrical appliances, including the following:

1. Make sure the voltage in your outlet corresponds to the voltage provided on the appliance label and that the socket is properly grounded. The outlet must be installed in accordance with applicable electrical codes according to EN. It must also be freely accessible so that the appliance can be quickly disconnected from electricity if necessary.

2. Never use the appliance in the following cases:

   • If the power cord is damaged.
   • If the appliance is not working or not working properly.
   • If it has fallen on the ground or you have damaged it in some other way.
   • If it was submerged in water.
   • If the appliance emits an unusual smell, smoke or sound during use.

3. WARNING: When the product is used for the first time, odor and smoke will appear, causing the protective coating on the heating elements to burn off. This is normal. We recommend leaving the appliance running for the first 15 minutes without food to allow it to “burn in”. We recommend ventilating by opening the windows and doors in the room.

4. All repairs, including cord replacements, must be carried out at a professional service centre! Do not remove the protective covers from the appliance; there is a risk of electric shock! If you interfere with the appliance, it exposes you to the risk of losing the legal right to claim defective performance or a quality warranty.

5. Furthermore, always switch off the appliance and disconnect it from the mains in the following cases:

   • Before moving the appliance.
   • Before cleaning.
   • If you will no longer use the appliance.
   • Always allow the appliance to cool down for about 30 minutes.

6. Protect the appliance against direct contact with water and other liquids, to prevent potential electric shock. Do not immerse the appliance or the power cord in water or any other liquid.

7. Do not use the appliance outdoors or in a humid environment, nor touch the power cord or the appliance with wet hands. Risk of electric shock.

8. To avoid electric shock or fire, do not use the appliance:

   • Outdoors or in a humid environment.
   • Close to the bath, shower or swimming pool.
   • Near flammable materials, such as curtains.
   • In the immediate vicinity of places where heat collects (stove, heater) or near an open fire.
   • Directly under an electrical outlet.
   • Do not expose the appliance to direct sunlight.

9. Place the device away from other objects so that the free air circulation required for its proper operation is ensured. Leave a clear space of at least 10 cm around and above the appliance.

10. The appliance must be placed on a stable and level surface so that the appliance cannot tip over and spill hot liquids.

11. Do not use this appliance with a programmer, timer, stand-alone remote control system or any other device that automatically switches the appliance as there is a risk of fire if the appliance is covered or incorrectly positioned.

12. Do not turn the appliance on or off by plugging or unplugging the power cord. Always switch the appliance off first using the ON/OFF button. Then you can unplug the power cord!

13. We recommend that you do not leave the appliance with plugged in power cable unattended. Do not remove the power cord from the outlet by yanking the cord. Unplug the power cord from the outlet by grasping the plug.

14. Do not allow the power cord to touch hot surfaces or run the cord over sharp edges.

15. The appliance is intended for indoor domestic use only.

16. The appliance is not intended for commercial use or for premises such as:
    Kitchenettes in shops, offices and other workplaces, appliances used in agriculture or for guests in hotels, motels and other residential areas, or appliances used in bed and breakfast establishments.

17. Only use, move, store and transport the appliance in an upright position. Do not switch the appliance on if it lies on the side or is upside down.

18. Using accessories and attachments not recommended by the manufacturer may endanger persons and property.

19. The manufacturer is not responsible for damage or injury caused by negligence or misuse. This appliance is designed to cook food without the use of oil or other fat.

20. Clean the appliance regularly.

21. Pay close attention when you are using the appliance near children!

22. This appliance can be used by children aged eight and older and by the physically, sensory or mentally impaired or by individuals with insufficient experience and knowledge, if supervised or trained to use the appliance in a safe manner and understand potential dangers. Children shall not play with the appliance. Cleaning and maintenance by the user must not be done by children unless they are older than 8 years old and under supervision. Children under the age of 8 must keep away from the appliance and the power supply.

23. Children shall not play with the appliance.

24. It is forbidden to use the appliance:

    • Without the frying pan properly inserted into the body of the appliance.
    • Without the grid inserted into the frying pan.
    • If the inner container is cracked or otherwise damaged.

25. Danger of burns:

    • The appliance warms up during operation. Do not cover any openings, air intake or air outlet.
    • Do not touch hot surfaces.
    • Always use the handle to grip the fryer. When you handle parts of the appliance when in operation, use suitable utensils and oven mitts.
    • Place the hot container and basket only on heat-resistant surfaces.
    • Do not try to carry a hot appliance. Extra care must be taken when moving the appliance containing hot oil or other hot liquids.
    • Be careful, hot steam is released through hot air vents during hot air frying. The steam is very hot! Keep a safe distance from the appliance to avoid burns.
    • Keep your hands and face a safe distance from steam and air vents.
    • After removing the pot from the appliance, take extra care to avoid scalding from the hot steam that is released from the food.
    • Take extra care even after switching off the appliance. It remains hot. Allow the appliance to cool for approximately 30 minutes before any further handling.

Do not immerse in water!
DANGER for children : Children must not play with packaging material.

Do not let children play with the plastic bags. Risk of suffocation.

Hot surface!

The surfaces marked in this way become hot during use.

BEFORE FIRST USE

1. Before using the product for the first time, remove all packaging material, labels, and stickers.
2. Clean the appliance including accessories, see the instructions in the cleaning and maintenance chapter.
3. Reassemble all the parts and insert them into the appliance. Warning: Never use the appliance without the frying grid inserted into the container. Place the fryer in a suitable stable place. Do not place the appliance in enclosed spaces or close to walls. Leave a space of at least 10 cm around and above it. Make sure there are no objects near the appliance that could be damaged by the heat. When the appliance is in use, do not cover it.
4. Plug the main lead into a socket.

WARNING: When the product is used for the first time, odor and smoke will appear, causing the protective coating on the heating elements to burn off. This is normal. We recommend leaving the appliance running for the first 15 minutes without food to allow it to “burn in”. We recommend ventilating by opening the windows and doors in the room.

INSTRUCTIONS FOR PREPARING MEALS

The hot air fryer is designed for heat treatment of food without the use of oil or other fats. Do not pour oil or other liquids into the fryer.

1. Place the food in the frying pan with the grid.

   • Note : It is not possible to put more food into the container than the maximum capacity.

2. Place the food container in the body of the hot air fryer.

3. Plug the fryer into the mains, select the program, temperature, and time, see “Food preparation table”, and start with the z button.

4. An audible signal sounds when the program is finished. Check if the dish is done, if necessary, put the container back and bake for a few more minutes.

5. If you will no longer be using the fryer, switch it off, unplug it from the mains, and allow it to cool down properly before cleaning.

   • Note:
   • Frozen food must be defrosted in advance and processed immediately.
   • We recommend shaking some foods halfway through the cooking time. In this case, pull the container out of the appliance by the handle and shake it. Then return the container to the fryer. Tip: If you set the timer for half the cooking time, an audible signal will alert you when the food is supposed to be shaken. However, this means that you must then set the timer again for the remaining cooking time

6. If you remove the frying container from the fryer body during operation, the appliance will automatically stop. When the container is returned, the fryer automatically switches on and continues with the originally set programme. Tip: During use, you can adjust the temperature or time to your liking. Your settings will last approximately 60 minutes after the frying pan is removed from the body.

7. The fryer can be switched off manually by pressing the z button for approx. 2 sec.

Warning! The danger of scalding : Take extra care when handling the container, both the food and the container are hot. The escaping steam could scald you. Do not touch hot surfaces. Always take the container by the handle. Do not tip the frying pan upside down when serving food. Hot liquids from food are accumulated at the bottom of the pot. Always use appropriate serving tools – for example, serving tongs.

CONTROL PANEL DESCRIPTION

Button 1 – Power (on/off)

Once the fryer is correctly positioned in the body of the appliance, the power button lights up. Press the power button to put the device into standby mode. After selecting the desired fryer, a second press of the power button starts the cooking process. Press and hold the power button for 2 seconds to stop food preparation and switch the appliance off.

Note : During cooking, you can pause and restart the cooking process by touching the button.

Button 2 – Preset program selection

Use this button to scroll through the 8 preset cooking programs. These programs have pre-set cooking times and temperatures.

Button 3 – Left fryer button

Touch the 1 button. The left fryer indicator lights up and the frying program is preset to the first choice (fries). At the same time, the fry program indicator will also flash. The default temperature and program duration are displayed alternately. When the temperature is displayed, the temperature indicator in the top left corner of the display is always lit. When the time is displayed, the time indicator in the bottom left corner of the display is always lit. If you press button 1 for 2 seconds, you can deselect the first fryer and the appliance will enter standby mode.

Button 4 – Right fryer button

Touch the 2 button. The right fryer indicator lights up and the frying program is preset to the first choice (fries). At the same time, the fry program indicator will also flash. The default temperature and program duration are displayed alternately. When the temperature is displayed, the temperature indicator in the top left corner of the display is always lit. When the time is displayed, the time indicator in the bottom left corner of the display is always lit. If you press button 2 for 2 seconds, you can deselect the second fryer and the appliance will enter standby mode.

Buttons 5 and 6 – Temperature and time settings for the left fryer

Buttons 5 and 6 allow you to increase or decrease the cooking temperature in the left fryer by 5 °C each time. Holding the button down will change the value more quickly. Temperature setting range: 80-200 °C. The a buttons also allow you to add or reduce cooking time by minutes. Holding the button down will change the value faster. Time setting range: 1-60 minutes.

Buttons 7 and 8 – Temperature and time settings for the right fryer

Buttons 7 and 8 allow you to increase or decrease the cooking temperature in the right fryer by 5 °C each time. Holding the button down will change the value more quickly. Temperature setting range: 80-200 °C. The a buttons also allow you to add or reduce cooking time by minutes. Holding the button down will change the value faster. Time setting range: 1-60 minutes

Button 9 – Switching temperature/time settings
By pressing the button and the corresponding temperature or time display, you can set the required temperature and time.

Button 10 – Concurrent end of preparation
The frying in both frying fryers can be stopped simultaneously by pressing this button.

Indicator 11
Display to show temperature/time in the left fryer.

Indicator 12
Temperature display in the left fryer.

Indicator 13
Time display indicator for the left fryer.

Indicator 14
Display to show temperature/time in the right fryer.

Indicator 15
Temperature display in the right fryer.

Indicator 16
Time display indicator for the right fryer.

DETAILED OPERATING INSTRUCTIONS

Commissioning

First, make sure that the frying pans are correctly inserted into the appliance. Insert the plug into the socket, the unit will switch on, beep once, all the lights will come on for one second and then go off. The power icon lights up.

Standby mode

When you press the power button, the left and right fryer buttons light up. At this point, the appliance is in standby mode. If no action is taken within 5 minutes, the appliance will switch off.

Using just one fryer

Press button 1 or 2, depending on which fryer you want to use. Once selected, the fries indicator will flash as the default cooking program. Meanwhile, the temperature and time display flashes. If you press and hold the icon for 2 seconds, you can deselect the selected fryer. If you do not select any fryer, the appliance will go into standby mode.

• Use the preset program selection button to select the frying program you want to use to prepare your food. Adjust the temperature or cooking time if necessary. When adjusting the temperature, each press of the button will change the temperature by 5 °C, long pressing the + or – button will increase or decrease the temperature faster. For each program, the temperature range of 80-200 °C is adjustable. Time setting: each press changes the time by 1 min, the adjustable time range is 1-60 min.
• When you have finished selecting the preset program, temperature and time, press the power button. The fryer starts cooking and the display shows the current cooking time with a countdown. The selected program indicator is permanently lit, the other program indicators are off.
• If you need to adjust the temperature or time during frying, press the temperature/time setting toggle button once and then press the + or – button to adjust the temperature or time. The fryer is still working when you change the temperature or time setting.
• If you need to change the program during frying, press the button once to select the preset program. The fryer will pause and the selected program indicator will flash. At this point, you can press the button repeatedly to select another program. You can also adjust the temperature and cooking time.
• If you press the power button while frying, the appliance will stop. If no action is taken within 5 minutes of stopping, the appliance will go into standby mode.
• If you need to switch off the appliance during frying, press the power button for 2 seconds. The heater and motor stop working. At this point, “OFF” appears on the display and the appliance beeps.
• When the frying is finished, the display shows “OFF” and the appliance beeps 5 times. The display screen turns off and the appliance returns to standby mode.
• If you pull out the fryer during cooking, the display will show “OPEN”. The appliance will stop and will not resume frying until you put the container back in.

Using both fryers simultaneously Cooking settings in both frying pans

• First, select the first fryer with the button and set the program, temperature and cooking time. Then select the second fryer and set the desired program, temperature and time in the same way.
• Press the power button to start frying in both fryers. The indicators of the respective fryers together with the active programs will alternately light up after 6 seconds.
• You can also start frying in both fryers sequentially – first set the frying parameters for the first fryer and start the preparation with the power button. Then press button 2 and repeat the procedure for the second fryer.
• While both fryers are frying, you can press the temperature/time switching button to briefly display the frying temperature setting on the corresponding display for the fryer. After 3 seconds, the displays will again show the remaining preparation time.

Changing the frying parameters

• If you need to change the temperature or time while using both fryers at the same time, first press the button to select the appropriate fryer and then adjust the temperature and time as required. The program cannot be changed during preparation. If you do not perform any operation within 10 seconds, the screen will automatically return to normal mode.
• If you need to change the cooking program during frying, you must first pause the frying by pressing the 1/2 button and the power button. You can then change the program. Press the power button again to start frying again.
• If you do not take any action for 5 minutes after pausing the cooking process, the fryer will go into standby mode.

Switching off one fryer

• Press the fryer button 1 or 2 and then long press the power button. The selected fryer goes into standby mode.

Pulling out the frying pan

• If you pull out the frying pan during cooking, the display will show “OPEN”. The frying in the frying pan will stop and will not continue until you put the pan back in. The second fryer will continue to cook without interruption. You can remove one frying pan at any time and work with the food without affecting the preparation in the other fryer.
• If you pull out the fryer in standby mode, the display will show “OPEN”. At this point, the fryer cannot be used.

Pause frying

• If you press the power button while frying in both fryers, the frying process will be paused. Both displays and program indicators will flash. If you press the power button again, frying will continue.
• If you pause the frying and do not perform any operation within 5 minutes, both fryers will go into standby mode.
• Once you have paused the frying, you can change the preset program, temperature and time as required by pressing the appropriate button of the left (1) or right (2) fryer. After changing the settings, you can continue frying by pressing the power button.

Stop preparation in both fryers

• If you press and hold the power button for at least 2 seconds during frying, frying will be interrupted and the “OFF” message will be displayed on both displays. The appliance beeps briefly and enters standby mode.
• If you want to stop cooking in only one fryer, first press button 1 or 2 to select the appropriate fryer and then press and hold the power button for at least 2 seconds. Frying in the selected fryer will be interrupted and the display will show “OFF”. The appliance beeps briefly and the fryer goes into standby mode. At this point, the fryer’s operating mode changes to frying in one fryer only.

Concurrent end of preparation

• This function is only active if you set both fryers to fry, but a different program is set for each fryer with a different duration. In this case, the simultaneous stop button lights up.
• If the button is pressed before frying begins, the food in both fryers will be adjusted so that the frying is finished at the same time. Thus, if one pot is set to a shorter time than the other, the frying in that pot will start later so that the preparation in both fryers is completed simultaneously.
• During the delayed start of cooking, the display of the fryer with the shorter time will show “HOLD”.

FOOD PREPARATION

The table below will help you to prepare different meals and to set up the fryer correctly.

Note : Please note that due to the varying quality and size of food, the settings below are approximate.
Because Rapid Air technology instantly heats the air inside the appliance, removing the fryer from the appliance during frying will hardly interrupt the cooking process.

Tips

• When preparing food, take into account the size and quantity of the food you are preparing. Depending on their size and quantity, we recommend the following time period compared to the values shown in the table:
• Shorten – in the case of processing smaller foods or smaller quantities.
• Extend – when cooking larger foods or larger quantities.
• Shaking the smaller ingredients halfway through the cooking time optimizes the final result and can help prevent uneven browning.
• To make the fries crispy, add a little oil to them and fry immediately.
• Do not cook very fatty ingredients such as sausages in a hot air fryer.
• Snacks that can be prepared in the oven can also be prepared in a hot air fryer.
• The optimal quantity for the preparation of crispy fries is 500 grams.
• Use pre-made pastry dough for quick and easy preparation of stuffed pastries. Pre-made dough also requires less preparation time than homemade dough.
• If you want to bake a cake or quiche or if you want to fry crispy or filled desserts, place a baking tray or mold (not included) in the hot air fryer.
• You can also use the hot air fryer to heat food. To reheat the ingredients, set the temperature to 150 °C and the time to 10 minutes.

Notes:

• If you start frying while the air fryer is still cold, add 3 minutes to the cooking time.
• When using both fryers at the same time, you can adjust the temperature or time according to the current cooking process.

TROUBLESHOOTING

CLEANING AND MAINTENANCE

Clean the appliance after each use.

• Switch off the appliance, disconnect the mains supply and allow it to cool completely. Remove the fryingpan from the fryer body to speed up cooling.
• Wash the container and the frying grid in warm water and detergent, rinse and dry. It is recommended to let the frying grate soak for about 10 minutes. Put it in a frying container and pour water with a little detergent.
• No parts or accessories of this product are dishwasher safe.
• Do not use abrasive or otherwise aggressive cleaning agents or sharp tools such as wire cloths for cleaning, as this will damage the non-stick surface.
• Do not immerse the body of the appliance or its power cord in water or other liquids. Wipe it with a damp cloth and dry it.
• Clean the inner walls of the product regularly. Wipe them gently with a damp cotton cloth and then dry them with a dry cloth.
• Make sure the appliance is properly dried before storing it. Assemble it and store it in a clean and dry place.

TECHNICAL DATA

• Voltage: 220–240 V
• Frequency: 50 Hz
• Total power input : 2700 W
• The volume of fryer 1 : 5.2 l
• The volume of fryer 2 : 3.1 l
• Temperature setting range : 80–200 °C
• Timer setting range : 0–60 min

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to the scrapyard. Packing foil, PE bags, and plastic elements – throw them into plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European

countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with the requirements of the EU directives on electromagnetic compatibility and electrical safety and the issue of heavy metals in electrical and electronic equipment.

The operating manual is available at www.ecg-electro.eu.

Changes of text and technical parameters are reserved.

Bosanski

• K+B Progres, a.s. U Expertu 91
• tel.: +420 272 122 111
• 250 69 Klíčany, Czech Rep.
• e-mail: [email protected]

The manufacturer takes no responsibility for printing errors contained in the product’s user’s manual.

• www.ecg-electro.eu

References

• Educatief - Jumbo
• ECG - My way of home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>