ECG ETF 1270 DA++ Clothes Dryer Instruction Manual

ECG ETF 1270 DA++ Clothes Dryer Instruction Manual

SAFETY INSTRUCTIONS

Read carefully and keep for future use!

Warning: The safety measures and instructions contained in this manual do not include all conditions and potential situations. The user must be aware that common sense, caution, and care are factors that cannot be integrated into a product. These factors must be therefore secured by the user/users using and operating this device. We are not liable for any damages caused during shipping, by incorrect use, voltage fluctuation or the modication or adjustment of any part of the appliance.

To protect against the risk of re or electric shock, basic precautions must be taken while using electrical appliances, including the following:

1. Make sure the voltage in your outlet corresponds to the voltage  provided on the appliance label and that the socket is correctlygrounded. The outlet must be installed in accordance with applicable electrical codes according to EN.

2. Do not operate the device if the cord is damaged. All repairs oradjustments including cord replacements must be carried out by a professional service centre! Do not remove the protective covers from the appliance; there is a risk of electric shock!

3. Do not plug and unplug the power cord from the outlet using wet hands. You will avoid risk of electric shock.

4. Do not touch the appliance with wet hands or feet.

5. The power cord must remain accessible once the device is installed. Do not shorten the cable and do not use power strips, adapters, or extension cords. Do not allow the cord to touch hot surfaces or place the cord over sharp edges.

6. Do not turn the device on or o by plugging or unplugging the  power cord. Do not remove the power cord from the outlet by yanking the cord. Unplug the power cord from the outlet by grasping the plug.

7. Disconnect the dryer if not in use for a long time, and before installation, maintenance, cleaning and repair, otherwise it may be damaged.

8. The appliance must not be powered by an external switching device, such as a timer, or connected to a circuit that is periodically switched on and o.

9. Any intervention in the appliance by a person other than an authorized service provider results in loss of warranty.

10. The warranty does not cover damage caused by outside eects (flood, chemicals, re, etc.).

11. The manufacturer is not liable for any damage caused by improper grounding/use. DANGEROUS VOLTAGE, RISK OF INJURY!

12. This appliance can be used by children aged 8 or older and by the physically and mentally impaired or by individuals with insucient experience and knowledge if supervised or trained to use the appliance safely and if they understand the potential dangers. Cleaning and maintenance by the user must not be done by children unless they are older than 8 years old and under supervision. Children under the age of 8 must keep away from the appliance and the power supply. Children may not play with the appliance.

13. This dryer is intended for domestic and internal use only. The warranty will be void in the event of commercial use.

14. Use this product only for laundry with a label that indicates it is suitable for drying.

15. The manufacturer is not liable for any damage caused by improper use or transportation.

16. Do not allow floor coverings to obstruct ventilation openings.

17. Installation and repairs of the appliance may only be carried out by an authorized service centre. The manufacturer is not liable for any damage caused by unauthorized repairs.
    WARNING: Never splash or pour water into the dryer to wash it! There is a risk of electric shock!

18. Leave at least 3 cm of space between the side and rear walls of the product. This also applies to the top, if you plan to place the appliance under the worktop.

19. Assembly  disassembly in the case of under the worktop installation must be carried out by an authorized service technician.

20. Check that the product is not damaged before installation. Never install and operate a damaged product.

21. Keep pets away from the dryer.

22. This device may not be used by persons (including children) with limited physical, sensory or mental capabilities, or persons without appropriate knowledge and experience, unless supervised or instructed in the use of this device by a person responsible for their safety.

23. Children of less than 3 years should be kept away unless continuously supervised.

24. Do not leave children unattended near the appliance.

25. Children could get stuck in the appliance, with risk of death. Do not allow children to touch the glass door when the appliance is operating. The surface becomes extremely hot and can cause skin damage.

26. Keep packaging material out of the reach of children.

27. Poisoning and irritation may occur if the washing and cleaning detergents are consumed or come into contact with skin and eyes. Keep cleaning products out of the reach of children. Electrical products are dangerous to children.

28. Keep children away from the product when in use.

    • You can use the child lock to avoid to prevent children from interrupting the drying cycle and changes in the running program.
    • Do not allow children to sit on or inside the product. Children under 3 years of age should not be allowed access unless they are under constant supervision.

29. Because of the risk of re, the following laundry and products should NEVER be dried in the dryer:

    • Do not dry unwashed laundry in the dryer.
    • Laundry that has been soiled with materials such as cooking oil, acetone, alcohol, gasoline, kerosene, stain remover, turpentine, wax, and wax remover must be washed in hot water with extra amount of detergent before drying in the dryer.
    • Dishtowels and mats that have residues of flammable cleaning agents or acetone, gas, kerosene, stain remover, turpentine, candles, wax, wax removers or chemicals.
    • Laundry that has hair spray remnants, nail polish removers, and the like.
    • Laundry on which industrial cleaning chemicals have been used (for example, dry cleaning).
    • Laundry, which contains any kind of foam, rubber or rubber part. These include foam rubber (latex foam), bathing caps, waterproof textiles, clothing or cushions with rubber support or rubber foam items.
    • Items with lls and damaged items (pillows or jackets). The foam rising from these articles may ignite during drying.
    •  Operating the dryer in environments that contain coal or flour dust may cause an explosion
      NOTICE: Underwear that contains metal reinforcement must not be dried in the dryer. The dryer may be damaged if the metal parts are loosened or broken when dried.

30. Fabric softeners or similar products must be used in accordance with the manufacturer’s instructions as specied in the fabric softener‘s instructions.

    • Remove all objects from the pockets, e.g. lighters and matches.

This product contains an environmentally safe but flammable gas R290. Protect the product from open flames and sources of fire.

NOTICE: Never stop the appliance until the drying program stops. If you have to stop the appliance, remove the laundry quickly and unfold it so that it cools down.

NOTICE: Make sure pets can not get into the dryer. Look inside the dryer before use.
NOTICE: The laundry in the dryer may overheat if the program is stopped or in the event of a power failure while the dryer is running. This concentration of heat can cause spontaneous combustion, so always run the Refresh program to cool the laundry or quickly remove any laundry from the dryer and hang it to cool it.

Only use the dryer for drying at the home and for drying fabrics marked as suitable for drying. All other uses are outside the intended use range and are prohibited. The warranty will be void in the event of commercial use.

This appliance is intended for domestic use only and should be placed on an even and stable surface.

• * Do not sit or lean on the dryer door. The dryer could tip over.

  • To maintain the temperature that does not damage the laundry (e.g. to prevent the ignition of the laundry), the cooling process starts after heating. Then the program ends. Always remove the laundry immediately at the end of the program.

NOTICE: Never use the dryer without a textile fibre filter or with a damaged filter. The textile fibre filters must be cleaned after each use as described in section Cleaning the textile fibre filter. The textile fibre filters should be dried after wet cleaning. Wet filters could cause a malfunction during drying. You must not allow the accumulation of fibres around the dryer’s drum (not applicable to appliances, which are ventilated to the exterior of the building)

INSTALLATION

In the room where the appliance is to be installed, there must be no lockable, sliding doors or hinged doors on the opposite side of the tumble dryer door, which could block the full opening of the dryer‘s door.

WARNING: Keep the air vents unobstructed in the appliance cabinet or a built-in structure. Before calling the nearest authorized service center for the dryer installation, make  sure that the electrical installation and water drain are suitable and in accordance with the instruction manual. If not, contact a qualified electrician and plumber to take the necessary measures.It is the customer’s responsibility to prepare the location for the dryer, as well as the electrical installation and wastewater installation. Check that the dryer is not damaged before installation. Do not install the dryer if it is damaged. Damaged products can endanger your health.

Install the dryer on a stable, level surface. Use the dryer in a well- ventilated, dust-free environment. Do not reduce the space between the dryer and the floor with materials such as carpets, boards and mats. Do not cover the ventilation grilles located on the dryer stand.

• After installing the dryer, leave it in the same place where it was connected. When installing the dryer,make sure that its rear wall does not touch anything (tap, socket, etc.).
• The operating temperature of the dryer is from +5°C to +35°C. When operating outside this temperature range, the performance of the dryer will be negatively affected and the product will be damaged.
• Be careful when transporting the product because it is heavy. Always use protective gloves.
• Always install the dryer at a wall.
• The rear of the dryer must be positioned against the wall.
• If the dryer is placed on a stable surface, use a spirit level to check that it is fully stable. If it is not, adjust the feet until the dryer is stable. Repeat this procedure each time the dryer is moved.
• Do not place the dryer on the power cable.

IMPORTANT NOTE: Do not reduce the gap between the dryer and the floor with materials such as carpets, boards and mats, otherwise the air dryer will not receive sufficient air intake.

Do not place the dryer in rooms where there is a risk of freezing. Freezing temperatures negatively affect the dryer‘s performance. Condensed water that freezes the pump and hose can cause damage.

Installation above the washing machine

NOTICE: You cannot place a washing machine on the dryer. Observe the following precautions when installing the dryer above the washing machine

NOTICE: The dryer can be only placed on washing machines that have the same or greater capacity.

In order to be able to use the dryer on the washing machine, a strengthening part must be provided between the two products. This strengthening part has to be installed by an authorized service technician. When the dryer is placed on a washing machine, the total weight of these products can reach nearly 150 kilograms (fully loaded). Place the appliances on a solid floor that has sufficient load capacity.

Installation table for washing machine and dryer

Dryer (Depth)| Washing machine
37-42 cm| 42-45 cm| 46-49 cm| 50-56 cm| 57-63 cm
52,5 cm| X| ✓| ✓| ✓| ✓
56 cm| X| X| ✓| ✓| ✓
61 cm| X| X| X| ✓| ✓
64 cm| X| X| X| X| ✓

Drain connection (with optional drain hose) In products equipped with a heat pump the water accumulates in the water tank during the drying cycle. You must drain the accumulated water after each drying cycle. You can drain the accumulated water directly into the drain through the drain hose that is supplied with the appliance instead  of regularly pouring out the water collected in the water tank.

C onnecting the drain hose

1. Pull out and remove the hose end from the rear of the dryer. Do not use any tools to remove the hose.
2. Connect one end of the drain hose supplied with the dryer to the connection point from which you removed the hose in the previous step
3. Connect the other end of the drain hose directly to the drain or sink.
   

NOTICE: The hose must be connected so that it can not come loose. If the hose is disconnected during draining, the house may be flooded.
IMPORTANT NOTE: Fasten the drain hose at the maximum height of 80 cm.
IMPORTANT NOTE: Make sure that the drain hose is not bent and is not wedged between the drain and the appliance.

Adjusting the feet

• To operate the dryer with less noise and vibration, it must be stable and balanced on the feet. Adjust the feet to ensure the proper product balance.
• Turn the feet to the left or right until the dryer is in a horizontal position.

IMPORTANT NOTE: Never remove the adjustable feet.

Power connection

NOTICE: There is a risk of electric shock.

• Your dryer is set to use 220-240 V and 50 Hz.
• The dryer power cable is equipped with a special connector. This connector must be connected to a grounded socket protected by a 16 amperes fuse as indicated on the rating plate. The fuse for shortcircuit protection of the power line where the socket is connected must also be 16 amperes. If you do not have such a socket or fuse, contact a qualied electrician.
• Our company is not liable for damages caused by use without grounding.

IMPORTANT NOTE: Operation of the appliance at low voltage shortens its life and reduces the performance of your machine.

Installation under the worktop

• Leave at least 3 cm of space between the side and rear walls of the product. This also applies to the top wall if you intend to install the appliance under the worktop.
• Assembly / disassembly in the case of under the worktop installation must be carried out by an authorized service technician.

DESCRIPTION

1. Top compartment
2. Control panel
3. Door
4. Base
5. Opening for stand
6. Ventilation grilles
7. Adjustable legs
8.  Stand cover
9. Rating plate
10. Textile bres lter
11. Socket cover

LAUNDRY PREPARATION

Sorting laundry for drying
Always follow the instructions on the garment labels. Dry only the laundry with a label indicating that it is suitable for drying in the dryer.

Do not use the dryer with the quantity and types of laundry, which are not listed in section „Dryer capacity“

• Suitable for tumble drying
  

• Ironing is not necessary

• Delicate/Fine drying

• Not suitable for dryer

• Do not dry

• Do not dry clean

• At any temperature

• At high temperatures
  

• At medium temperature
  

• At low temperatures

• Without heating
  

• Hang to dry
  

• Spread to dry
  

• Hang wet to dry

• Spread to dry in the shade
  

• Suitable for dry cleaning
  

Do not dry thin, multi-layered, or thick fabrics together as they dry at different temperatures. For this reason, dry together the garments of the same fabric structure and type. This ensures uniform drying. If you think the laundry is still wet, you can choose a time program for further drying.Please dry big things (like blankets) and small ones separately to keep your laundry from remaining wet.

IMPORTANT NOTE: Wool, silk clothing, fine and valuable fabrics, airtight pieces and tulle curtains are not suitable for machine drying.

Preparing laundry for drying

Danger of explosion and fire! Remove all objects such as lighters and matches from your pockets

NOTICE: The dryer drum and the fabric can be damaged.

• The laundry after washing can be entangled with each other. Separate the laundry items before placing them in the dryer.
• Remove all items from your pockets and do the following:
• Tie together the textile straps, apron strings and the like, or use a laundry bag.
• Fasten the zippers, buckles and fasteners, and the buttons on the bed linen.
• To get the best drying result, sort the laundry by the type of fabric and drying program.
• Remove clips and similar garment metal parts.
• Fabrics such as t-shirts and knitted garments usually shrink when first dried. Use a protective program.
• Do not over dry synthetics. This causes the laundry to be wrinkled.
• When washing the laundry you want to dry, adjust the fabric softener according to the washing machine manufacturer’s instructions.

Dryer capacity

Follow the instructions in section „Program and consumption table“. Do not load more than is the capacity listed in the table.

IMPORTANT NOTE: We do not recommend to load the dryer with the amount of laundry exceeding the value shown in the picture. If the appliance is overloaded, its drying performance is reduced. In addition, the dryer and laundry may be damaged.

USE OF THE DRYER

Control panel

1. Program selection button
2. Electronic indicator and other functions

Program selection button

Use the program selection button to select the desired drying program

Electronic indicator and other functions

Screen symbols

• Water tank alert indicator

• Indicator for textile bre cleaning alert

• Indicator alert for cleaning the heat exchanger

Program and consumption table

Press the Start/Pause button to start the program. The Start/Pause indicator shows that the program has started and the drying light indicator comes on.

Programme

|

Load (kg)

| Spinning speed in the washing machine| Approximate amount of moisture remaining|

Drying time (minutes)

---|---|---|---|---
Cotton| Extra dry for the closet| 7| 1000| 60 %| 167
Dry for the closet| 7| 1000| 60 %| 155
Dry for ironing| 7| 1000| 60 %| 130
Synthetics| Dry for the closet| 3.5| 800| 40 %| 68
Dry for ironing| 3.5| 800| 40 %| 58
Delicates| 2| 600| 50 %| 49
Time program| –| –| –| –
Baby clothes| 3| 1000| 60 %| 78
Jeans| 4| 1000| 60 %| 108
Sport| 4| 800| 40 %| 87
Mix| 4| 1000| 60 %| 105
Refreshing wool| –| –| –| 5
Refresh| –| –| –| 10
Fast| 1| 1200| 50 %| 45 34 minutes from 1. 3. 2020
Shirts| 0.5| 1200| 50 %| 30 20 minutes from 1. 3. 2020

Energy consumption values

Programme

|

Load (kg)

| Spinning speed in the washing machine| Approximate amount of moisture remaining| Energy consumption values (kWh)
Cotton: Dry for the closet| 7| 1000| 60 %| 1.70
Cotton: Dry for ironing| 7| 1000| 60 %| 1.45
Synthetics: Dry for the closet| 3.5| 800| 40 %| 0.67
Energy consumption in the “Off” mode P O (W)| 0.5
Energy consumption in the “On” mode P L (W)| 1

The “Cotton to Closet” program used at full and partial load is the standard drying program for which information on the label and information sheet is relevant. This program is the most energy ecient program for drying normal wet cotton laundry.

• Energy label standard program (EN 61121: 2013)

All values in the table have been determined in accordance with EN 61121: 2013. Consumption values may differ from the values in the table depending on the type of fabric, the method of spinning, ambient conditions and variations in voltage.

Additional functions

The table below summarizes the options that can be selected in the programs is provided below

levels. In this way, the desired level of dryness can be selected. Levels that can be selected other than the default: 1, 2, 3. When selected, the corresponding drying level indicator lights up.
Wrinkle free| If you select the option “Wrinkle free” and do not open the dryer door at the end of the program, 1 hour of the wrinkle protection phase is extended to 2 hours. When you select “Wrinkle free”, you will hear a sound notification. To cancel this option, press the same button again. If you open the appliance door or press the Start /Pause button during the wrinkle protection phase, this phase will be cancelled.
Delayed start| You can delay the program start time by selecting 1 to 23 hours. You can activate the desired delay time by pressing the Start/Pause button. The selected program starts automatically after the selected time passes. During the delay period, options compatible with the program can be activated/deactivated. Holding the Delay Start button repeatedly changes the delay time.
Cancelling the sound alert| The dryer will give an audible warning when the program selection knob turns, buttons are pressed, and at the end of the program. To cancel the sound alert, press and hold the “Wrinkle free” button for 3 seconds. When you press the button, you will hear a sound alert that this option is cancelled.
Drying time| If the knob is in the Dry Time program position, the option can be selected by pressing the Dry Time button and the program is started by pressing the Start/Pause button. Hold the Dry Time button to change the time repeatedly.
Child lock| There is a child lock option to avoid changes in the programme flow when keys are pressed during the programme. To activate child lock feature user should press “Delay Start” and “Anticrease” buttons simultaneously for 3 sec. When the child lock activated, all keys will be deactivated. Child lock is not automatically deactivated at the end of the program. To deactivate the child lock at end of the programme, set the programme selection knob to ‘‘Off’’ position. Then set programme selection knob to first position. Child lock is still active. To deactivate child lock , user should press “Delay Start” and “Anticrease” buttons simultaneously for 3 sec. When activating/deactivating the child lock, ‘‘CL’’ will visualize on display for 2 sec and then becomes off; and an audible warning will be heard.

Warning : When the product is running or the child lock is active, if you turn the programme selection knob, you will hear an audible warning and ‘‘CL’’ will visualize on display for 2 sec and then becomes off. If you turn the programme selection knob, you will hear an audible warning. Even if you set the programme knob to another programme, the previous programme will continue running. To select a new programme, you need to deactivate the child lock and then set the programme selection knob.

Program start

The Start/Stop LED flashes during program selection. Press the Start/Pause button to start the selected program. The Start/Pause LED lights up to indicate that the selected program is running. At the same time, the drying LED lights up.

fabrics, such as cotton towels, linen, pillows, bathrobes at high temperatures, allowing you to place them in the closet.
Dry for the closet| This program dries cotton pyjamas, underwear, tablecloths, etc., and allows you to place them in the closet.
Dry for ironing| This program dries cotton linen and prepares it for ironing. The laundry removed from the dryer will be damp.
Synthetics| Dry for the closet| This program dries synthetic materials such as shirts, t-shirts, blouses, at a lower temperature compared to a cotton program, and allows you to place the clothes in the closet.

Dry for ironing

| This program dries synthetic materials such as shirts, t-shirts, blouses, at a lower temperature than the cotton program, and prepares the clothes for ironing. The laundry removed from the dryer will be damp.
Delicates| This program dries thin clothing such as shirts, blouses and silk garments at low temperature to be ready for wear.
Time program| You can use time programs from 20 to 200 minutes to reach the desired low temperature drying level. Regardless of the level of drying, the program stops at the desired time.
Baby clothes| This program dries fine children‘s clothes at low temperature to be ready for wear.
Jeans| This program is used to dry jeans.
Sport| The Sport program is used for synthetic sports laundry, like shorts, t-shirts. It dries the laundry at low temperature.
Mix| This program dries mixed cotton and synthetic garments that do not stain to be ready for wear.
Refreshing wool| Wool refreshing helps wool fabrics remove excess water after washing using low temperatures and gentle drum movements.
Refresh| Time drying option is selected from 10 minutes to 120 minutes without providing hot air, refresh is done and bad odors can be eliminated.
Fast| 1 kg of cotton shirts, washed at high speed in the washing machine, will be dry in 45 minutes ( 34 minutes from 1. 3. 2020 ).
Shirts| 2 to 3 shirts will be ready for ironing in 30 minutes ( 20 minutes from 1. 3. 2020 ).

IMPORTANT NOTE: Do not open the door when a program is running. If you have to open the door, do not leave it open too long.

Program progress

During program If you open the door while the program is running, the dryer will switch to standby mode. After closing the door, press the Start/Pause button to continue the program. . If you have to open the door, do not leave it open too long.

End of program
When the program is over, the indicator lights of Start/Pause, the water tank level, the lter cleaning and the heat exchanger will light up. In addition, an alert will be sound at the end of the program. You can remove the laundry to prepare the dryer for a new batch.

IMPORTANT NOTE: Clean the lter after each program. Empty the water container after each program.
IMPORTANT NOTE: if you do not remove the laundry after the end of the program, the 1 hour Anti Crease phase is activated. This program rotates the drum at regular intervals to prevent wrinkling.

Information about the drum light

• This appliance is equipped with a LED light located in the drum. The LED lights up automatically when you open the door. It automatically goes o after a while.
• The user can not set up turning the light on or o by himself.
• Do not try to replace or modify the light yourself.

Programs

| Option
---|---

Drying time

| End of cycle Cancelling the sound alert|

Child lock

|

Level of drying

|

Wrinkle free

Cotton| Extra dry for the closet| ✓| ✓| ✓| ✓| ✓
Dry for the closet| ✓| ✓| ✓| ✓| ✓
Dry for ironing| ✓| ✓| ✓| ✓| ✓
Synthetics| Dry for the closet| ✓| ✓| ✓| ✓| ✓
Dry for ironing| ✓| ✓| ✓| ✓| ✓
Delicates| ✓| ✓| ✓| X| ✓
Time program| ✓| ✓| ✓| X| ✓
Baby clothes| ✓| ✓| ✓| ✓| ✓
Jeans| ✓| ✓| ✓| ✓| ✓
Sport| ✓| ✓| ✓| ✓| ✓
Mix| ✓| ✓| ✓| ✓| ✓
Refreshing wool| ✓| ✓| ✓| X| ✓
Refresh| ✓| ✓| ✓| X| ✓
Fast| ✓| ✓| ✓| X| ✓
Shirts| ✓| ✓| ✓| X| ✓
X| Not optional
✓| Optional

MAINTENANCE AND CLEANING

IMPORTANT NOTE: Do not use industrial chemicals to clean the dryer. Do not use a dryer that has been cleaned with industrial chemicals.

Cleaning the textile fibres filter

IMPORTANT NOTE: DO NOT FORGET TO LEAN TEXTILE FIBERS FILTER AFTER EACH PROGRAM RUN.

To clean the textile fibres filter:

1. Open the loading door.
2. Pull out and remove the filters.
3. Open the outer filter.
4. Use hands or soft cloth to clean the outer filter.
5. Open the inner filter
6. Use hands or soft cloth to clean the inner filter.
7. Close the filters and put the hooks back in place.
8. Place the inner filter inside the outer filter.
9. Reinstall the textile fibres filter back in place. After using the drier for a period of time, if you encounter a layer which creates an obstacle on the top of the filter, clean the filter with warm water. Dry the filter thoroughly and reinstall it.
   

Emptying the water tank

1. Pull out the compartment cover and carefully remove the tank
2. Pull out the compartment cover and carefully remove the tank.
3. Empty the water from the tank.
4. If fibres collect on the tank cover, clean it with water.
5. Replace the water tank back in place

IMPORTANT NOTE: Never remove the water tank while a program is running. Water condensed in the water tank is not suitable for human consumption

IMPORTANT NOTE: DO NOT FORGET TO CLEAN THE WATER TANK AFTER EACH PROGRAM RUN

Cleaning the heat exchanger

IMPORTANT NOTE: If you see warning “Heat exchanger cleaning”, clean the heat exchanger.
IMPORTANT NOTE: EVEN IF THE INDICATOR “HEAT EXCHANGER CLEANING” IS NOT ON: CLEAN THE HEAT EXCHANGER AFTER EACH 30 DRYING RUNS OR ONCE  A MONT

If the drying process is finished, open the loading door and wait until it cools.

1. Open the cover plate cover as shown.

2. Unlock the heat exchanger.

3. Remove the cover of the heat exchanger as shown in the picture.

4. Clean the front area of the heat exchanger according to the picture.

5. Install the heat exchanger cover according to the picture.

6. Lock the heat exchanger.

7. Close the cover plate according to the picture.

WARNING: THE HEAT EXCHANGER STABILIZERS ARE SHARP. DO NOT TRY TO CLEAN THEM MANUALLY. THE STABILIZERS CAN DAMAGE YOUR HANDS.

Cleaning the humidity sensor

There are humidity sensors inside the appliance, which determine if the laundry is dry or not.
To clean the sensors:

1. Open the loading door.
2. If the machine is still hot due to drying, wait for it to cool.
3. Use a soft cloth soaked in vinegar to wipe the sensor’s metal surfaces and dry them.

IMPORTANT NOTE: CLEAN THE METAL SENSOR SURFACES 4 x A YEAR.
IMPORTANT NOTE: Do not use metal tools to clean the metal surfaces of the sensor.
WARNING: Do not use cleaning agents or similar products to clean the sensors due to the risk of re or explosion

Cleaning the inner surface of the loading door

IMPORTANT NOTE: DO NOT FORGET TO CLEAN THE INNER SURFACE OF THE LOADING DOOR AFTER EACH DRYING RUN.

Open the dryer loading door and clean all inside surfaces and seals with a soft, damp cloth.

TECHNICAL SPECIFICATIONS

• Min. Height: Height with adjustable feet is not available. Max. height: Height with adjustable feet extended to maximum.
• Weight of dry laundry before washing

IMPORTANT NOTE: Technical specifications may be changed without prior notice when the quality of the dryer will be improved.
IMPORTANT NOTE: These values were obtained under laboratory conditions according to appropriate standards. These values may vary depending on environmental conditions and use of the dryer

NOTICE:

1. For safety reasons, regulations require an area of at least 1 m² per 8 g of refrigerant for this type of equipment. For 150 g of propane, the minimum allowable room size would be 18.75 m³.
2. Coolant: Risk of re / poisoning risk / risk of material damage and damage to the appliance. The appliance contains coolant, R290, which is environmentally safe but flammable. Improper disposal may result in re or poisoning. Dispose of the appliance properly and take care not to damage the refrigerant circuit.
   • Type of coolant: R290
   • Amount of gas: 150 g
   • POD (Potential ozone depletion): 0
   • PGO (Global warming potential): 3
   • Risk of explosion and re! Remove all lighters and matches from the pockets.
3. Do not place the dryer next to an open flame and sources of fibre.

TROUBLESHOOTING

The dryer is equipped with systems that are continuously checking during drying to take the necessary precautions and warn you of any malfunction.

WARNING: If the problem persists even though you applied the steps provided in this section, contact your vendor or an authorized service. Never try to repair a malfunctioning product.

TROUBLECAUSEThe dryer cannot be opened or the programme cannot be started. The dryer does not get activated when adjusted.The dryer might not be plugged in.The programme has been interrupted for no reason.The loading door might not be closed properly.Clothes have shrunk, felted or deteriorated.The programme used might not be suitable for the type of laundry.Water leaking from the loading door.There might be lint accumulated on the inner surfaces of the loading door and on the surfaces of the gasket of the loading door.The loading door opens on its own.The loading door might not be closed properly.The water tank warning symbol is on/flashing.The water tank might be full.The condenser cleaning warning symbol is on.The condenser might be unclean.The filter cleaning warning symbol is on.The lint filter might be unclean.The program can not be started and the filter warning led is blinkingThe filter seat might be clogged by lint.The program can not be started and both condenser and filter warning leds are blinkingThe condenser and filter may not be placed.

doors/windows to prevent the room temperature from rising too much.
There might be a layer of limescale on the humidity sensor.| Clean the humidity sensor.
The dryer might be overloaded with laundry.| Do not overload the dryer.
The laundry might be insufficiently spun.| Select a higher spin speed on your washing machine.
Laundry comes out damp at the end of the drying process.| The laundry that comes out hot at the end of the drying process generally feels more humid.
The programme used might not be suitable for the type of laundry.| Check the care labels on the laundry items, select a suitable programme for the type of laundry and additionally, use the time programmes.
The surface of the lint filter might be clogged.| Wash the filter with lukewarm water.
The condenser might be clogged.| Clean the condenser.
The dryer might be overloaded with laundry.| Do not overload the dryer.
The laundry might be insufficiently spun.| Select a higher spin speed on your washing machine.
SOLUTION
Make sure that the plug is fitted in the socket.
The loading door might be open.| Make sure that the loading door is properly closed.
You might not have set a programme or pressed the Start/ Pause key.| Make sure that the programme has been set and the dryer is not in the Standby (Pause) mode.
Child lock might be active.| Deactivate the child lock.
Make sure that the loading door is properly closed.
There might have been a power failure.| Press the Start/Pause key to start the programme.
The water tank might be full.| Empty the water tank.
Check the care labels on the laundry items, select a suitable programme for the type of laundry.
Clean the inner surfaces of the loading door and the surfaces of the gasket of the loading door.
Push the loading door until you hear the closing sound.
Empty the water tank.
The water discharge hose might be bent.| If the product is connected directly to the water outlet, check the water discharge hose.
Clean the condenser.
Clean the filter.
The filter seat might be clogged by lint.| Clean the filter seat.
There might be a layer that causes obstruction on the surface of the lint filter.| Wash the filter with lukewarm water.
Clean the filter seat.
There might be a layer that causes obstruction on the surface of the lint filter.| Wash the filter with lukewarm water.
The condenser may not be placed.| Replace the condenser.
Replace the filter and condenser.
The filter and condenser warning leds are blinking even though the filter and condenser are placed.| Call technical service.

AUTOMATIC MALFUNCTION ALERTS AND WHAT TO DO

Your tumble dryer is equipped with a built-in malfunctions detection system, which are indicated by a combination of flashing operating lights. The most common error codes are listed below.

authorized service representative.
E04| Contact your nearest authorized service representative.
E05| Contact your nearest authorized service representative.
E06| Contact your nearest authorized service representative.
E08| There may be voltage fluctuations in the power supply. In this case, wait until the voltage value returns to the operating range.

Energy efficiency

• You should use the dryer at full power, but make sure it is not overloaded.
• When washing clothes, the spin speed should be as high as possible. This reduces drying time and reduces  power consumption.
• Make sure the same types of laundry are dried together.
• When selecting a program, follow the recommendations in the instruction manual.
• Leave a suitable gap on the front and back of the dryer for air circulation. Do not cover the grilles on the front of the appliance.
• If it is not necessary, do not open the dryer door during drying. If you have to open the door, do not leave it open too long.
• Do not add new (wet) laundry during the drying run.
• The hairs and fibres that separate from the laundry and merge in the air are collected using the “Textile Fibre Filters”. Make sure the filters are cleaned before and after each use.
• For heat pump models, make sure the heat pump is cleaned at least once a month or after every 30 uses.
• The environment in which the dryer is installed must be well ventilated during drying.

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product. Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directives on electromagnetic compatibility and electrical safety.

The operating manual is available on internet at www.ecg- electro.eu. Changes of text and technical parameters are reserved.

PRODUCT INFORMATION SHEET

In accordance with Delegated Commission Regulation (EU) No 392/2012
Supplier name or trademark| ECG
Name of the model| ETF 1270 DA++
Rated capacity (kg)| 7
Dryer type| Heat pump
Energy efficiency class (1)| A++
Annual energy consumption (kWh) (2)| 211
Automatic/Non-automatic| Automatic
Power consumption of standard full load cotton program (kWh)| 1.7
Power consumption of the standard partial load cotton program (kWh)| 0.96
Off mode power consumption for standard full load cotton program PO (W)| 0.5
On mode power consumption for standard full cotton load program PL (W)| 1
Time duration in On mode (min)| not available
Standard cotton program (3)| –
Duration time of a standard full load cotton program Tdrying (min.)| 155
Duration time of a standard partial load cotton program Tdrying 1/2 (min.)| 95
Duration time of a standard full and partial load cotton program (Tt)| 121
Condensation efficiency class (4)| B
The average condensation efficiency of a standard full load cotton program Cdrying| 81 %
The average condensation efficiency of a standard partial load cotton program Cdrying 1/2| 81 %
Weighted condensation efficiency of a standard full and partial load cotton program Ct| 81 %
The sound power efficiency level of a standard full load cotton program (5)| 65
Built-in| No

1. Scale from +++ (most effiective) to D (least effiective)
2. Energy consumption is based on 160 standard cycles of standard cotton program at full load, partial load, and low power consumption modes. The actual energy consumption per cycle depends on how the appliance is used.
3. The “Closet Drying Program” used at full and partial load is a standard drying program that is subject to the information on the label and information sheet. This program is suitable for drying normal wet cotton laundry and is the most efficient program for energy consumption for cotton.
4. Scale from G (least effiective) to A (most effiective)
5. Weighted average value – L wA expressed in dB (A) re 1 pW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>