martor Secumax 350 SE Safety Knife Instruction Manual

: June 13, 2024
: martor

Table of Contents

Anther Models
SAFETY KNIFE HANDLING
SAFETY ADVICE
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

martor Secumax 350 SE Safety Knife

martor Secumax 350 SE Safety Knife

Anther Models

SECUMAX 350 SE NO. 350040

| | NO. 3550 0,30 mm
SECUMAX 350 SE NO. 350045
| | NO. 3448 0,50 mm

SAFETY KNIFE HANDLING

Handling: Use the pointed cutter nose for piercing the cutting material, e.g. cardboard (up to 2 layers) or film. You can then cut (fig. 1).

The best way to open cardboard boxes is by holding the SECUMAX 350 SE slanted (fig. 2).

For plastic hoops please hold at a 45 degree angle (fig. 3).

To scrape off adhesive tape, use the external unsharpened edges of the blade head (only NO. 350040, fig. 4).

Blade change: Open the handle at the top (at the height of the arrow) and completely pull out the cyan coloured blade magazine (fig. 5).

You can then take out the spare balde. The lock of the blade head is released at the same time. Take out the blade head and turn it or change it (fig. 6).

Position the spare blade parallel to the slanted side of the cutter head. Push the blade in, and then downwards, until fully engaged (fig. 7).

Then push the blade magazine back into the handle (fig. 8).

SAFETY ADVICE

To ensure that you use your new MARTOR knife safely and most effectively, please read and note the following user-instructions. Please keep the written guide in a safe place so that you can access it at any time.

General application instructions : Please always use the product carefully for manual cutting work only and not for any purposes other than those that are intended. Please take the correct handling and the proper use of the knives into account in this regard. As an additional safety measure, we recommend the wearing of safe gloves.
Special application instructions to avoid the danger of injuries : Always take great care when handling the product. Before first use, familiarise yourself with the safety technology and how it works. Before every further use, check the knife for proper functioning. Only use cutting tools that are in perfect condition with sharp, clean and undamaged MARTOR blades. Also make sure that the knife’s operation is not impaired by the material to be cut or by dirt or particle deposits around the blade.
CAUTION: The blade is sharp and can result in serious and deep cuts.
Therefore, never reach into the blade! Do not place your free hand in the line of cutting and never cut directly towards you.
Replacement of spare parts : Replace any blades that become dull at the right time! Use only the replacement blades from MARTOR for this purpose. Dispose of old blades in a proper fashion. They should not be placed in a waste paper bin, as this poses a considerable danger of injuries. Never perform any repairs yourself. If the knife shows signs of aging or any other wear, e.g. which impair safety features, blade changing or usage, the knife must be taken out of service and replaced. Do not modify this product in any way. Modifications of any kind may impair product safety.
CAUTION: The risk of injury caused by manipulation of this product is extremely high.
Non-use of the knife : Always secure the blade in such a way (depending on product type) that injuries due to cuts are excluded. Store the knife in a secure place.
Care instructions : To guarantee a long service life, always keep the knife clean and do not expose it to unnecessary soiling and humidity.
CAUTION: No liability will be assumed for consequential losses. Subject to technical changes and errors! This knife does not belong in the hands of children!