REXING V1P 4K UHD Dash Cam User Guide
- June 6, 2024
- Rexing
Table of Contents
V1P
Quick Start Guide
1. Overview
Thank you for choosing REXING! We hope you love your new product as much as we do.
If you need assistance, or have any suggestions to improve it, please contact us. You can reach us via care@rexingusa.com or call us at 203-800-4466. Our support team will respond you as soon as possible.
Always a surprise in Rexing. Check us out here.
https://www.facebook.com/rexingusa/
https://www.instagram.com/rexingdashcam/
https://www.rexingusa.com/support/registration/
Facebook Instagram Site
[](https://www.rexingusa.com/support/registration/)
2. What’s in the box
(1) (2) (3) (4)
(5) (6) (7) (8) (9)
- Rexing V1P Dash Cam
- Car Charger
- Rear Camera
- Dash Cam Mount Plate & 3M Adhesive
- Mini-USB Cable
- Cable Management Tool
- Cable Clips©
- V1P Quick Start Guide
- V1P Safety Guide
3. Camera Overview
- Micro SD Card Slot
- Power Button
- Reset Button
- Menu Button
- Mode Button
- REC (Record) Button *
- OK (Confirm) Button **
- MIC (Microphone) Button ***
- Screen Button
- Mini-USB Port
- GPS Logger Port
- Rear Camera Port (Not Support)
- Lens Angle Adjustment
- The Camera is recording when the LED is flashing red.
** The Camera is recording when the LED is flashing red. The device charging or powered on when the LED is solid blue.
*** The device is charging or powered on when the LED is solid blue.
Screen Icons
- Recording Standby Status
- Loop Recording Time
- Exposure Value
- MIC (Off)
- Current Date (DD/MM/YYYY)
- Time (24H)
- Memory Card (Inserted)
- G-Sensor Sensitivity Level
- Parking Mode (On)
- Video Resolution
- Recording Time (Current Clip)
- GPS Signal (not connected)
- WDR Mode (On)
- Recording (On)
- MIC (On)
- Plate Number
- Battery Charging
- GPS Signal (locked)
4. Installation
Step 1: Install the Dash Cam
Place the 3M tape on the Mount and properly orient the Mount square to the
roof and hood line of the vehicle.
Important! Ensure the T-interlock on the Mount is oriented in the correct
direction.
Firmly press the Mount onto the windshield. Wait at least 20 minutes before mounting the camera.
- Orientation mount as shown
Step 2: Insert the Memory Card
The Rexing V1P accepts [Class 10/ UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you can begin recording. Before inserting or removing a memory card, first ensure you’ve powered down the device.
Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
1. Press the Power button to turn the power off
Step 3: Power the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette lighter and camera.
To ensure the V1P records to your memory card properly and without error. Before you start using a new memory card, you must format the card within the camera using the format function. Always backup important data stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then turn on the device by connecting to a power source. Press REC to stop recording. Then press the MENU button twice to enter the System Setup Menu. Use the REC and MIC buttons and go to the Format setting. Press the OK Button to confirm the selection.
- Connect Mini-USB to the camera
- Blue LED lights indicate the device is charging or powered
You may now disconnect from power. The camera will shut down after 3 seconds. The camera should begin recording automatically the next time it is powered on.
- Press the Menu button twice
- Press the OK button to confirm formatting the card
Step 4: Mount the Rear Camera
Mount the rear camera as shown below. Use the provided rear camera cable to connect the rear camera to the front camera.
- Plug Rear Camera into the Dash Cam
- Rear Camera installation
Step 5: Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the windscreen and tuck in under the trim.
Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter.
Connect car charger to the camera. The camera will auto-start recording once powered on.
- Plug Mini 5 pin Connector to the Dash Cam
- Route power cable to the Dash Cam
- Plug charger into power outlet or cigarette lighter
5. Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e.: the vehicle is started.)
To turn the device on manually, press and hold the POWER button until the welcome screen appears.
The camera will automatically start recording when powered on.
- Press an hold the POWER button to turn the device on manually
Menu Settings
Power the camera on. If the camera is recording, press the REC button to stop recording. Press the MODE button and toggle to the desired mode.
Press the MENU button once to enter the settings menu for a Mode. Press the MENU button twice to enter the System Settings.
- System icon
- Video Mode icon
- Press the Menu button to select the desired setting
- Press the Mode button and toggle to the desired Mode
Video Recording
The camera will automatically start recording when the device receives a charge. The LED lights and the red dot will blink when the device is recording. Press the REC button to stop recording.
- The camera automatically start recording when powered on
Video Playback
Playback of videos can be done on the device or a computer. Also, if you have purchased a Rexing GPS Logger you may play back the recordings in a specialized application.
To playback a video on the device, toggle to the Playback mode. Use the REC and MIC buttons to toggle to the desired video. Press the OK button to play.
- Playback mode
- Control playback with these buttons
During playback use the OK (pause), MIC (fast forward) and REC (rewind) buttons to control the video playback.
To playback a video on the computer either use an SD card adapter or connect the device to the computer directly using the USB to Mini B 5pin male cable.
To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.
To playback a video using USB cable, connect the USB Cable to the device and the computer. After the device powers up, press the OK Button to select Mass Storage.
On the computer, navigate to device drive. The videos are stored at: \CARDV\MOVIE. Select the video to playback.
- Connect USB connector to computer
- Select Mass Storage
Parking Monitor
Connect the dash cam to the smart hardware kit to activate the parking monitor function (Need to purchase the smart hardware kit separately).
Please visit support.rexingusa.com to watch a video tutorial.
Wi-Fi Connect
Download “Rexing Connect” app from the App Store/Google Play Store.
-
To access or exit the Wi-Fi feature, hold down OK.
-
Open Wi-Fi settings on your phone, find “SSID:B50 _ XXXX” from the list, tap to connect.
(Default password: 12345678) -
Open the Rexing Connect app, tap “Connect to enter realtime video streaming page.
-
Once connected, the dash cam screen will switch to the camera view and will display “Wi-Fi Connect” message.
Using the Rexing Connect app, you can view a live preview of the dash cam screen, start/stop recording, as well as view and save your captures with your mobile device.
For further instruction regarding the Wi-Fi Connect feature, please visit www.rexingusa.com/wifi-connect/.
GPS Logger
(Need to purchase separately)
When connected to the camera, it will record the speed and location of your vehicle as you drive.
You can then access this information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com).
Press the MENU button twice and enter the System Settings.
Toggle to the GPS Speed Unit setting and select your preferred speed unit.
After a GPS signal is found, the screen icon will turn from blue to green.
Please visit gpsa.rexingusa.com to watch a video tutorial.
- GPS Signal (not connected)
- GPS Signal (active)
Taking Photos
To take a photo, stop video recording and toggle to the Photo Mode.
Press the OK Button to take a photo.
To view a photo, stop video recording and toggle to the Playback Mode.
Press the REC and MIC Buttons to toggle through your photos.
To delete a photo, stop video recording and toggle to the Playback Mode and toggle through the videos and photos to the one you want to delete.
Press the MENU button once and toggle to the Delete option.
Press the OK Button and select Delete Current or Delete All.
- Toggle to the Playback mode and select a photo to view
- Toggle to the Delete option
- Choose the desired option
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
References
- GPS Player Type A | Rexing USA
- Wi-Fi Connect
- Product Support | Rexing USA
- Wi-Fi Connect
- Rexing Dash Cam (@rexingdashcam) • Instagram photos and videos
- Rexing Product Reg II | Rexing USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>