GoodEarth SE1303-BP2-00LFW-G Outdoor Led Smart Security Light User Guide

GoodEarth SE1303-BP2-00LFW-G Outdoor Led Smart Security Light

APP DOWNLOAD/REGISTER

Search “Good Earth Lighting” on the App Store® or on Google Play and download. Once successfully downloaded, open the Good Earth App, review, and agree to the privacy agreement and terms of condition by tapping “Agree”.Register by entering your email address. Enter the provided verification code sent via email and create a password for the account.

SELECTING LIGHT TYPE

On the Home Screen, select “Add Device”. In the Wi-Fi Lighting section, manually add the lighting fixture by selecting the appropriate light category from the options presented.

RESET AND SYNC WITH SMART DEVICE

To successfully sync with a smart device (i.e. smartphone, tablet, etc.) the light fixture must first be rapidly flashing in paring/reset mode. To reset the light fixture, press and hold the pairing button located on the bottom of Passive Infrared Sensor (PIR) for 6 seconds. Once successfully reset, the light fixture will begin to rapidly flash at the same pace as the light on the screen. The flash will last about 3 minutes to allow time to pair. Click “Confirm”. Select the WiFi network that you would like your smart device connected to, and enter the password to begin syncing the device (NOTE: Your smart device must be connected to the same network only for pairing process). Once successfully paired, the light fixture will stop flashing and the home screen will appear on the smart device. Select the recently synced device from the home screen to control all light functions via the smart device.

LED Indicator:

1. No connection to WiFi network: RED LED off
2. Pairing the network: RED LED Flashing
3. Pairing successful: RED LED off
4. PIR Triggered: Red LED flash twice (2 flashes per trigger)

BLUETOOTH®4.0

When the device is paired for the first time, it will automatically pair via Wi-Fi network. When the Wi-Fi network goes down, the device will connect via Bluetooth® wireless technology. The user must turn on their Bluetooth® on their mobile device in order to control this way. Once the Wi-Fi network turns back on, then the device will automatically change back to Wi-Fi enabled control. The range of the Bluetooth® connection is approximately 300 feet (91 meters). However, maximum communication range will vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment.

SET ME PROFILE

Select “Me” at bottom right. Tap “Home Management”. Tap “Create a home” to create a new Home Name, Home Location, and which Rooms this light is installed. It is important to set Home Location to ensure Location and Time are set to your preference because the dusk-to-dawn feature is based on time of your location on your phone, following sunset to sunrise on your time zone. (NOTE: Between sunset/dusk and sunrise/dawn is about 30 minutes variances.)

FEATURES

Wi-Fi Control No hub required to control via smart device. Control from anywhere as long as you have a connection to the internet. Custom, Default, Manual Settings Customize area light and security light settings, or simply pick default setting are set to go.

• Selectable White Lights Create cozy warm white for outdoor ambiance or energetic daylight white for security purposes. Select from soft white (2700K), warm white (3000K), or to daylight white (5000K) to suit your lighting needs.
• Detection Range Select the distance in which the passive infrared sensor (PIR) activates the lights at. Up to 100-ft.
• Easy Setup Successfully sync devices in 5 minutes.
• Dimmable Control the lights brightness from 20%-100%.
• Create Scenes Create unique scenes with customizable effects, color cycles, brightness, and speed.
• Home Management Assign multiple Wi-Fi lights to different rooms to control room by room. Hands-Free Control Voice control works with Amazon Alexa and Google Assistant. Schedule Timer
• Set timer on both area and security light how long the lights to stay on; and/or set lights to activate during certain conditions (time, date, and weather).
• Create Groups Group multiple Wi-Fi lights together to control simultaneously (only for the same lighting type).

App Controls and Functions

The “Default Settings” mode has pre-set settings that cannot be changed by the user. When the device is paired for the first time, the default settings mode become active.

DEFAULT SETTINGS MODE
If the user wants to use a different mode, click on “EDIT” to select which mode the light is using.

AREA LIGHT

• Color Temperature: 3000K Warm White
• ]Timer: (Turns the Area Light on at dusk for duration of the light until it shuts off at dawn)
• Brightness: 30%

SECURITY LIGHT (When motion is activated)
Color Temperature: 5000K Daylight White PIR Motion Sensor: Dusk to dawn (Motion activates during the duration from dusk to dawn for energy savings). Timer: 2 Minute (Light will stay on for 2 minutes when motion is activated) Detection Range: 60 Feet (The detection zone of the motion sensor is up to 60 Feet) Brightness: 100%

CUSTOM SETTING MODE

AREA LIGHT
(DUSK TO DAWN)

• Color Temperature Wheel: Select any white between 3000K to 5000K
• Color Presets: Select pre-set value 3000K Warm White, 4000K Bright White, or 5000K Daylight White
• Brightness Presets: Select pre-set value 25%, 50%, 75%, or 100%
• Brightness: Select Brightness from 20%-100%
• Timer: Select timer how long the area light to stay on OFF: Area Light never turns on.
• 3 Hour: Turns the Area Light on at dusk for a duration of 3 hours.
• 5 Hour: Turns the Area Light on at dusk for duration of 5 hours.
• Dusk-to-Dawn: Turns the Area Light on at dusk for the duration of the night until it shuts off at dawn
• 24/7: Turns the Area Light on at all times day or night.

SECURITY LIGHT (MOTION ACTIVATED)

• Color Temperature Wheel: Select any white between 3000K to 5000K
• Color Presets: Select pre-set value 3000K Warm White, 4000K Bright White, or 5000K Daylight White
• PIR (Passive infrared) Motion Sensor: Select when the motion sensor to activate
• OFF: Motion never activates
• DUSK TO DAWN: Motion activates during the duration from dusk to dawn for energy savings
• 24/7: Motion activates during day or night
• Brightness: Select Brightness from 20%-100%
• Detection Range: Select the distance how far the motion sensor detected. Select between 5FT, 30FT, 60FT, or MAX up to 100 FT
• Timer: Select timer how long the light to stay on when motion is activated. Select between 1 min, 2 min, 5 min, or 10 min. (Example) 1 MIN: Light stays on 1 minute when motion is activated

MOTION SENSOR

The 240-degree coverage of the motion sensor is measured side-to-side. The sensor is more effective side-to-side, rather than motion coming straight at it (in-and-out). Adjust the motion sensor head so that it detects motion moving across the coverage area. The position of the sensor should not exceed 45° below horizontal. Do not aim the motion sensor at any water, bushes or plants that may move in the wind, pedestrian traffic, moving cars, etc., as this may trigger the motion sensor.

NOTE: If the sensor arm becomes loose, readjust the sensor head and tighten the joint screw on the sensor arm.

MANUAL MODE

Manual Mode allows the light to turn on at any time, by overriding all sensor controls, so the lights come on regardless of time of day.

LIGHT

Color Temperature Wheel: Select any white between 3000K to 5000K Color Presets: Select pre-set value 3000K Warm White, 4000K Bright White, or 5000K Daylight White Brightness Presets: Select pre-set value 25%, 50%, 75%, or 100% Brightness: Select Brightness from 20%-100%

SCENES

Pre-set scene is available to override quick and easy or tap “Add New” to create a new scene. Security: 5000K daylight white at 100% brightness Full Bright: 4000K bright white at 100% brightness Sunset: 3000K warm white at 50% brightness

SCHEDULE

Tap “Add New” to add a new schedule

1. Edit name
2. Adjust to the desired time
3. Select days to repeat. If you only want to work once, don’t select any days.
4. Select light to be turned on or off

FEATURES

Connect with Alexa App:

1. Tap the Menu Icon located at the top left of the screen and select “Skills & Games”
2. Tap on the search box and type “Good Earth Lighting” Select Good Earth Lighting and click “Enable”
3. Enter your Good Earth Smart username and password, then tap “Link Now”

Voice Command Examples:

• “Alexa, turn on my light”
• “Alexa, dim the Flood Light to 50 percent.”
• “Alexa, outdoor light to warm white.”

Connect with Google Home App:

1. Tap the Plus (+) Icon located at the top left of the screen and select “Set up device”. Then tap “Have something already set up”.
2. Tap on the search box and type “Good Earth Lighting” Select Good Earth Lighting.
3. Enter your Good Earth Smart username and password credentials, then tap “Link Now”

Voice Command Examples:

• “Hey Google, turn on my light”
• “Hey Google, dim the Flood Light to 50 percent.”
• “Hey Google, outdoor light to warm white.”

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is a no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
• Consult the dealer or an experience radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Need Help? Please visit our website at: https://goodearthlighting.com /contact-us or call the Customer Care Center

For more product and warranty information, go to: www.goodearthlighting.com Good Earth Lighting® 1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056 Good Earth Lighting® is a registered trademark of Good Earth Lighting, Inc. © 2021 Good Earth Lighting, Inc.

References

• . Spend less. Smile more.
• Decorative Light Fixtures, Energy-Efficient Lighting | Good Earth Lighting
• Contact Us | Good Earth Lighting
• Good Earth Lighting - YouTube

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>