sprout KH-NAT Hand Washing Station Instruction Manual
- June 17, 2024
- Sprout
Table of Contents
sprout KH-NAT Hand Washing Station
Specifications
- Model No.: KH-NAT
- Manufacturer: QUARK ENTERPRISES, LLC
- Made in : USA
Product Usage Instructions
Assembly
1. Start by setting up Side Panel C by aligning the grooves on the Support Panels inwards as shown in the picture.
2. Insert tabs on Braces A & B into slots on Side Panel C and press down to lock them in place.
3. Press down on Braces A & B to secure them further. Use the hex wrench to thread screws into the slats.
4. Insert Slats with holes D into the outermost slots on Side Panel C. Then, insert the remaining Slats E and Dowels F into their designated places.
5. Align the slots on Table Top G with the tabs on Braces A & B. Push down until flush with the top of Side Panels.
6. Set the second Side Panel C into position by fitting the dowels into the holes and working your way across one at a time. Carefully set it upright.
7. Using a rubber mallet, push the Table Top G sideways so the tabs lock in with the notch as shown in the picture.
Usage
1. Assemble the product completely before use.
2. Adult supervision is required during use.
3. Do not use the product without proper assembly and supervision.
Maintenance
1. If necessary, tighten any loose parts using pliers with jaws wrapped in cloth.
FAQ
- Q: What should I do if I encounter difficulties during assembly?
- A : If you are frustrated or need help, contact our customer service agent at +1 833-530-0033 or email us at support@sprout-kids.com for assistance.
TOOLS
INSTALLATION INSTRUCTIONS
- Grooves on Support Panels should be oriented inwards as pictured above.
- Insert tabs on Braces A & B into slots on the Side Panel C and press down to lock.
- Insert Slats with holes D into the outermost slots on the Side Panel C. Insert remaining Slats E and Dowels F into designated places
- Set the second Side Panel C into position. It helps to start at one side put the dowels into the holes and work your way across one at a time. Carefully set upright.
- Press down on the Braces A & B to lock into place. Thread screws into slats with the hex wrench
- Align up slots on Table Top G with tabs on Braces A & B . Push down until flush with the top of Side Panels.
- Using a rubber mallet, push the Table Top G sideways so the tabs lock in with the notch as pictured above.
- If necessary, carefully place the unit on its end, and push down on the top edge of the Side Panels to tighten.
- As desired, insert screw-in hooks into holes on the outside of the Side Panels. If necessary, tighten with pliers with jaws wrapped with cloth.
- Adult assembly only
- Assemble completely before use
- Do not use this product without Adult Supervision
Frustrated? Need Help?
Talk to our customer service agent at: +1
833-530-0033
Or email us at: support@sprout-kids.com
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
COPYRIGHT QUARK ENTERPRISES 2019
References
- Search and Found - Instantly - search.com
- Montessori Furniture for Playful Learning Environments – Sprout
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>