LAMAX Duals1 Wireless Headphones User Guide
- June 4, 2024
- LAMAX
Table of Contents
LAMAX Duals1 Wireless Headphones User Guide
Controls
Switching on
The earphones switch on automatically when removed from the charging station. To switch on manually, hold down the multifunction button for 3 seconds. Both earphones must be manually turned on separately. When switched on, an audible alert sounds and the blue LED flashes.
Switching off
The earphones switch off automatically when inserted into the charging station. To switch off manually, hold down the multifunction button on one of the earphones for 4 seconds. When switched off, an audible alert sounds and the red LED lights up
Connecting
- Remove the earphones from the charging station. The earphones will automatically pair to each other and an audio alert will sound. One of the earphones will act as the master and be ready for pairing, as indicated by the alternating flashing of the blue and red LEDs. On the other earphone the blue LED will flash.
- Switch on Bluetooth on your device and search for LAMAX Duals1 in the list of available Bluetooth devices. After successfully connecting, an audible alert sounds and the LED goes off.
If there are problems with making a connection, remove the earphones from the list of connected devices on your smartphone. Take the earphones out of the charging station. The earphones will automatically turn on and be ready to connect. Turn them off by holding the multifunction button for 4 seconds. Then manually hold down the multifunction button on both earphones for 10 seconds until the LEDs on both flash red and blue 3 times, then turn off for a moment and then flash blue. Place them back into the charging station and connect as described in step 1.
Charging
To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum voltage of 5 V. When charging, the LEDs will gradually light up according to the charging status. When fully charged, all 4 LEDs will be lit.
To charge the earphones, place them into the charged charging station. When charging, the LEDs in the earphones light up red.
Parameters
Printing errors reserved.
The current version of the user manual can be downloaded here:
https://lamax-electronics.com/duals1/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>