COLAMY 2219 High Office Chair Instruction Manual
- June 17, 2024
- COLAMY
Table of Contents
COLAMY 2219 High Office Chair
INSTRUCTION MANUAL
Model No.: 2219
LIMITED WARRANTY
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
EXCLUSIONS
This warranty does not apply and no other warranty applies to:
- Normal wear and tear, which are to be expected over the course of ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY.
- Products that were not installed, used, or maintained in accordance with product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identified as the equivalent of a
single shift, forty-
(40) hour workweek. To the extent that a seating product is used in a manner
exceeding this, the applicable warranty period will be reduced in a pro-rata
manner.
RETURN POLICY
- We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.
- Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.
- If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.
- If the product is faulty when you receive it, please contact us and we will help you out.
- We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or has missing parts, not due to our error.
HOW RETURNS WORK
-
To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.
-
Then we will provide the return address for the product as soon as possible.
-
Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you.
-
In addition, if the return is approved, the refund amount will be automatically credited to your original payment method.
-
TEL
800-507-2215 -
WEB colamyhome.com
-
E-MAIL
support@colamyhome.com
CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
WARNING
Please read the instructions carefully and follow the assembly steps.
- To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
- To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
- Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
- Using the wrong size of screws for a particular part could cause damage to the screw or the part.
- Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.
PRODUCT FEATURES
-
Pneumatic Seat Height Adjustment
Pulling the lever upwards enables height adjustment of the seat, then the seat can be locked at a fixed height by releasing the lever. -
Convenient Hidden Footrest
Simply pull out the footrest by hand and kick it back by your feet to retract -
Tilt Angle Adjustment
Simply pull up the lever and recline back to adjust the tilt angle, and then push down to lock the backrest.
SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING : 400LBS
ASSEMBLY PARTS AND TOOL
BEFORE YOU GET STARTED, A FEW POINTERS:
- Having a friend to help makes assembly extra-easy
- Mind the important safety information
- PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED.
- MISSING PARTS? support@colamyhome.com
ASSEMBLY INSTRUCTIONS
-
Step 1
Turn the Star Base(4) upside down, then press the Casters(7) into the holes at the end of each base leg. -
Step 2
Insert the Lift(5) into the center hole of the Star Base, the Lift Cover(6) should be placed over the Lift. -
Step 3
Attach the Back Cushion(1) and Seat Cushion(2) with FOUR M8*16mm Bolts(8), tighten all the bolts with the Wrench(11).
Note 1 : Tight all the bolts to 70%, make sure it have space to adjust, than tight all the bolts to 100%. -
Step 4
Push the seat cushion down onto the lift firmly until the connection is secure. -
Step 5
Attach the Arms(3) to the Seat Cushion(2) and Back Cushion(1) with FOUR M8*57mm Bolts(9), using the Wrench(11).- Note 1: Arm rests are labeled with an “L” (left) or “R” (right) to show which sides they should be placed on.
- Note 2: Tight all the bolts to 70%, make sure it have space to adjust, than tight all the bolts to 100%.
-
Step 6
Press the Plastic Caps(10) into the Arms holes to cover the bolts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>