COLAMY A08 Wingback Tufted Dining Chairs Set of 6 Instruction Manual

June 14, 2024
COLAMY

COLAMY A08 Wingback Tufted Dining Chairs Set of 6

WARNING

Please read the instructions carefully and follow the assembly steps.

To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the screw or the part.
Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.

PRODUCT DETAILS

Adjustable Footpads

They provide greater stability and prevent the floor from scratching, keeping the chair stable at all times.

High Elastic Spring

This design offers great support and comfort, protecting the chair from slipping.

ASSEMBLY PARTS AND TOOL

WEIGHT CAPACITY FOR SEATING: 300LBS

  • Sit in the center of the chair with your back against the backrest

  • Do not sit at the front edge of the chair

  • Do not push the chair around when a person is sitting in it.

  • Do not stand on the chair

  • Do not push down on the backrest when a person is reclined

  • Do not use the chair with more than one person

  • Do not place all your weight on the backrest only

BEFORE YOU GET STARTED, A FEW POINTERS:

Please open the Seat Cushion bottom and take out all accessories before installation.

Please use the included wrench instead of an ELECTRIC HAND DRILL in case of damage to the chair leg.

  1. Seat-Back *1

  2. Front Legs *2

  3. Back Legs *2

  • Bolt M855mm 8

  • Flat Washer *8

  • Lock Washer *8

  • Wrench *1

ASSEMBLY INSTRUCTIONS

**Step 1**
Connect two Front Legs(2, marked F) to Seat-Back(1) by using Flat Washer(B), Lock Washer(C), Bolt M8*55mm(A) and Wrench(D), please tighten the bolts 50% at first, not fully tightened.

  • Bolt M855mm 4

  • Flat Washer *4

  • Lock Washer *4

  • Wrench *1

Note: The side where the black tape is applied is the side where the screws are tightened.

**Step 2**

Connect two Back Legs(3, marked B) to Seat-Back(1) by using Flat Washer(B), Lock Washer(C), Bolt M8*55mm(A) and Wrench(D), please tighten the bolts 50% at first, not fully tightened.

  • Bolt M855mm 4

  • Flat Washer *4

  • Lock Washer *4

  • Wrench *1

Note: The side where the black tape is applied is the side where the screws are tightened.

Step 3

Now, stand the chair upright, place the chair on a flat surface and put pressure on the seat if needed to make sure all 4 legs are even, finally 100% tighten the bolts and close the Velcro.

ATTENTION

Please read the following instructions to help you assemble the dining chair faster.

**Step 1**

  1. Partly screw in bolts, but do not fully tighten.

    **Step 2**

  2. Place the chair on a flat surface and apply pressure to the seat. Firstly tighten the middle bolt on the back, then both bolts on the sides, and finally the front legs. Make sure all bolts are fully tightened before using the chair.
    Step 3

  3. lf the legs are uneven, you can also adjust the foot pegs at the bottom of the legs to improve balance.

LIMITED WARRANTY

COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.

EXCLUSIONS

This warranty does not apply and no other warranty applies to:
EXCLUSIONS
Normal wear and tear, which are to be expected over the course of ownership. Misuse, abuse, or excessive use of the product.
Modifications or attachments to the product that are not approved by COLAMY.
Products that were not installed, used, or maintained in accordance with product instructions and warnings.
Products used for rental purposes or unauthorized retail activities.

Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.

RETURN POLICY

We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.

Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.

If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.

If the product is faulty when you receive it, please contact us and we will help you out.
We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or has missing parts, not due to our error.

HOW RETURNS WORK

To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.

Then we will provide the return address for the product as soon as possible. Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you.

In addition, if the return is approved, the refund amount will be automatically credited to your original payment method.

Customer Support


ASSEMBLY VIDEO

EL
800-507-2215
WEB
colamyhome.com
E-MAIL
support@colamyhome.com
CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals