COLAMY A334 Upholstered Parsons Dining Chairs Set of 2 Instruction Manual

June 14, 2024
COLAMY

COLAMY A334 Upholstered Parsons Dining Chairs Set of 2
COLAMY A334 Upholstered Parsons Dining Chairs Set of 2

WARNING

Please read the instructions carefully and follow the assembly steps.

To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the screw or the part.
Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.

PRODUCT DETAILS

Adjustable Footpads

They provide greater stability and prevent the floor from scratching, keeping the chair stable at all times.

High Elastic Spring

This design offers great support and comfort, protecting the chair from slipping.

SAFETY INFORMATION

WEIGHT CAPACITY FOR SEATING: 250LBS

Sit in the center of the chair with your back against the backrest

Do not sit at the front edge of the chair

Do not push the chair around when a person is sitting in it

Do not stand on the chair

Do not push down on the backrest when a person is reclined

Do not use the chair with more than one person

Do not place all your weight on the backrest only

ASSEMBLY PARTS AND TOOL

EFORE YOU GET STARTED, A FEW POINTERS

Please open the Seat Cushion bottom and take out all accessories before installation.

Please use the included wrench instead of an ELECTRIC HAND DRILLin case of damage to the chair leg.

  1. Back Cushion *1

  2. Seat *1

  3. Front Legs *2

  4. Seat Base Cover *1

?Bolt M880mm 4 (For Back Legs)

? Bolt M860mm 4 (For Front Legs)

? Bolt M855mm 1

? Flat Washer *9

? Spring Washer *9

? Wrench *1

ASSEMBLY INSTRUCTIONS

Step 1

Remove the Velcro from under the Seat(2). Connect Seat(2) to Back Cushion(1) using one Allen Bolt M880mm(A), one Flat Washer(D), and one Spring WasherE) for each corner hole; use one Bolt M855mm(C), one Flat Washer(D), and one Spring Washer(E) for the central hole. Tighten all bolts with a Wrench(F), starting at 50%.

?Bolt M880mm 4 (For Back Legs)

? Bolt M855mm 1

? Flat Washer *5

? Spring Washer *5

? Wrench *1

Assembly Parts And Tool

Step 2 To attach Front Legs(3), use a flat washer(D), spring washer(E), and Bolt M8*60mm(B) for each hole. Tighten the screws to 50% using the wrench(F). Adjust the balance of the chair, and then tighten all bolts to 100% with the wrench(F).
Refer to Step 2 of “ATTENTION” in the manual.

Note: The side where the black tape is applied is the side where the screws are tightened.
? Bolt M860mm 4 (For Front Legs)

? Flat Washer *4

?Spring Washer *4

? Wrench *1

Assembly Parts And Tool

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Step 3

Finally, attach the Seat Base Cover (4) back onto the underside of the chair seat using Velcro. Your chair is ready for use.

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

ATTENTION

Please read the following instructions to help you assemble the dining chair faster.
Step 1

  1.  Partly screw in bolts, but do not fully tighten.
    Step 2 2. Place the chair on a flat surface and apply pressure to the seat. Firstly tighten the middle bolt on the back, then both bolts on the sides, and finally the front legs. Make sure all bolts are fully tightened before using the chair.
    ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

  2. Place the chair on a flat surface and apply pressure to the seat. Firstly tighten the middle bolt on the back, then both bolts on the sides, and finally the front legs. Make sure all bolts are fully tightened before using the chair.
    ATTENTION

  3. f the legs are uneven, you can also adjust the foot pegs at the bottom of the legs to improve balance.

LIMITED WARRANTY

COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.

EXCLUSIONS

This warranty does not apply and no other warranty applies to:

  • Normal wear and tear, which are to be expected over the course of ownership.
  • Misuse, abuse, or excessive use of the product.
  • Modifications or attachments to the product that are not approved by COLAMY.
  • Products that were not installed, used, or maintained in accordance with product instructions and warnings.
  • Products used for rental purposes or unauthorized retail activities.
    Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.

RETURN POLICY

We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.

Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.

LIMITED WARRANTY LIMITED WARRANTY

If the product is faulty when you receive it, please contact us and we will help you out.
We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or has missing parts, not due to our error.

HOW RETURNS WORK

To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.

Then we will provide the return address for the product as soon as possible.
Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you. HOW RETURNS WORK In addition, if the return is approved, the refund amount will be automatically credited to your original payment method.

customer support

TEL 800-507-2215

WEB colamyhome.com

E-MAIL support@colamyhome.com

logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals