COLAMY 2577F Ergonomic Mesh Office Chair with Footrest Instruction Manual
- June 14, 2024
- COLAMY
Table of Contents
COLAMY 2577F Ergonomic Mesh Office Chair with Footrest Instruction Manual
WARNING
Please read the instructions carefully and follow the assembly steps.
To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the screw or the part.
Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.
PRODUCT FEATURES
Pneumatic Seat Height Adjustment
Pulling the lever upwards enables height adjustment of the seat, then the seat
can be locked at a fixed height by releasing the lever.
Rock Tension Adjustment
Simply adjust the knob counterclockwise to tighten the tension of rocking.
Or loosen the tension by turning the knob clockwise whenever needed.
Seat Back Locking Mechanism
Simply press the lever down to lock the seat in an upright position.
SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 275LBS
Sit in the center of the chair with your back against the backrest
Do not sit at the front edge of the chair
Do not push the chair around when a person is sitting in it
Do not stand on the chair
Do not push down on the backrest when a person is reclined
Do not use the chair with more than one person
Do not place all your weight on the backrest only
ASSEMBLY PARTS AND TOOL
BEFORE YOU GET STARTED, A FEW POINTERS:
Having a friend to help makes assembly extra-easy
Mind the important safety information
-
Seat Cushion *1
-
Back Cushion *1
-
Seat Plate *1
-
Gas Piston *1
-
Star Base *1
-
Casters *5
-
Headrest *1
-
Bolts M820mm 4
-
Bolts M845mm 3
-
Bolts M625mm 2
-
Wrench *1
ASSEMBLY INSTRUCTIONS
Step 1
Turn the Star Base(5) upside down, then press the Casters(6) into the holes
at the end of each base leg
Step 2
Insert the Gas Piston(4) into the center hole of the Star Base.
Step 3
Align the Seat Plate(3) over the pre-drilled holes underneath the Seat
Cushion(1), make sure that the front of the Seat Plate is facing the front of
the Seat Cushion. Attach the Seat Plate to the Seat Cushion using FOUR Bolts
M8*20mm(8), tighten all the bolts with the Wrench(11), being careful not to
miss-thread the bolts or damage the Seat
Step 4
Attach the Back Cushion(2) and Seat Cushion with THREE Bolts M8*45mm(9),
tighten all the bolts with the Wrench(11).
Note 1: Tight all the bolts to 70% at first, make sure it has space to adjust, finally tight all the bolts 100%.
Step 5
Push the Seat Cushion(1) down onto the Gas Piston(4) firmly until the
connection is secure
Step 6
Install the Headrest(7) to Back Cushion, tighten TWO Bolts M6*25mm(10) with
Wrench(11).
LIMITED WARRANTY
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
EXCLUSIONS
This warranty does not apply and no other warranty applies to:
- Normal wear and tear, which are to be expected over the course of ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY.
- Products that were not installed, used, or maintained in accordance with product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.
RETURN POLICY
We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.
Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.
If the product is faulty when you receive it, please contact us and we will help you out.
We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or has missing parts, not due to our error.
HOW RETURNS WORK
To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.
Then we will provide the return address for the product as soon as possible.
Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you.
In addition, if the return is approved, the refund amount will be automatically credited to your original payment method.
CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
TEL: 800-507-2215
WEB: colamyhome.com
E-MAIL: [email protected]
