COLAMY 1325F Gaming Chair Instruction Manual
- June 14, 2024
- COLAMY
Table of Contents
COLAMY 1325F Gaming Chair Instruction Manual
WARNING
Please read the instructions carefully and follow the assembly steps.
To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
To prevent misalignment, keep the screws loose and do not tighten them until they are all in their correct positions.
Avoid over tightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the
screw or the part.
Please lubricate all moving parts regularly and tighten all bolts and screws
every 6 months, or as needed.
PRODUCT FEATURES
Pneumatic Seat Height Adjustment
Pulling the lever upwards enables height adjustment of the seat, then the
seat can be locked at a fixed height by releasing the lever.
Rock Tension Adjustment
Simply adjust the knob counterclockwise to tighten the tension of rocking.
Or loosen the tension by turning the knob clockwise whenever needed.
Tilt Angle Adjustment
Simply pull up the lever and recline back to adjust the tilt angle, and then
push down to lock the backrest.
SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 350LBS
-
Sit in the center of the chair with your back against the backrest
-
Do not sit at the front edge of the chair
-
Do not push the chair around when a person is sitting in it
-
Do not stand on the chair
-
Do not push down on the backrest when a person is reclined
-
Do not use the chair with more than one person
-
Do not place all your weight on the backrest only
ASSEMBLY PARTS AND TOOL
BEFORE YOU GET STARTED, A FEW POINTERS:
Having a friend to help makes assembly extra-easy
Mind the important safety information
Back Cushion *1
Seat Cushion *1
Arms *2
Footrest *1
Star Base *1
Seat Plate *1
Head Pillow *1
Lumbar Pillow *1
Angle Adjuster *2
Lower Adjuster Cover *2
Upper Adjuster Cover *2
Gas Lift and Cover *2
Casters *5
M825mm 20
M58mm 4
Wrench *1
Rubber Ring *2
ASSEMBLY INSTRUCTIONS
Step 1
Turn the Star Base(5) upside down, and press the Casters(13) into the holes
at the end of each base leg. Insert the Gas Lift(12) into the center hole of
the Star Base, the Gas Lift Cover(12) should be placed over the Gas Lift.
Step 2
Using the Wrench(16) to attach the Arms(3) to the Seat Cushion(2) with
EIGHT Bolts M8*25mm(14), .
Note : Arms are labeled with an “L” (left) or “R” (right) to show which
sides they should be placed on
Bolts M825mm 8
Wrench *1
Step 3
Align the Seat Plate(6) over the pre-drilled holes underneath the Seat
Cushion(2), make sure that the front of the Seat Plate is facing the front of
the Seat Cushion. Attach the Seat Plate to the Seat Cushion using FOUR Bolts
M8*25mm(14), tighten all the bolts with the Wrench(16), being careful not to
miss-thread the bolts or damaged the Seat.
Bolts M825mm 4
Wrench *1
Step 4
Take the 2 Rubber Rings(17) from the screw kit, insert the 2 metal rods of
the Footrest(4) into the footrest rod bracket slider under the Seat
Cushion(2), then put on 2 Rubber Rings(17) at the end of metal rods.
Step 5
Connect Back Cushion(1) and Seat Cushion(2) with Angle Adjuster(9), tighten
EIGHT M825mm Bolts(14) with Wrench(16).
Bolts M825mm *8
Wrench *1
Step 6
Turn the Seat-Back upright and align the center hole of the Seat Plate over
the Gas Lift(12), then push the Seat Cushion(2) down onto the Gas Lift(12)
firmly until the connection is secure, put the Head Pillow(7) and Lumbar
Pillow(8) on the chair.
Step 7
Turn the Seat-Back upright and align the center hole of the Seat Plate over
the Gas Lift(12), then push the Seat Cushion(2) down onto the Gas Lift(12)
firmly until the connection is secure, put the Head Pillow(7) and Lumbar
Pillow(8) on the chair
LIMITED WARRANTY
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
EXCLUSIONS
- Normal wear and tear, which are to be expected over the course of ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY.
- Products that were not installed, used, or maintained in accordance with product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.
RETURN POLICY
We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the time frame. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays. RETURN POLICY
Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.
If the product is faulty when you receive it, please contact us and we will help you out.
We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or has missing parts, not due to our error
HOW RETURNS WORK
To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.
Then we will provide the return address for the product as soon as possible.
Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you. HOW RETURNS WORK
If the return is approved, we will automatically credit the purchase amount back to your original method of payment.
TEL
800-507-2215
WEB
colamyhome.com
E-MAIL
support@colamyhome.com
CAUTION : COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH
MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY
ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>