COLAMY 287 Office Chair Executive High Back Computer Chair Instruction Manual
- June 14, 2024
- COLAMY
Table of Contents
COLAMY 287 Office Chair Executive High Back Computer Chair
Product Information
Model No.: 287
Product Features:
- Pneumatic Seat Height Adjustment: Pulling the lever upwards enables height adjustment of the seat, then the seat can be locked at a fixed height by releasing the lever.
Product Usage Instructions
Assembly Instructions:
- Please read the instructions carefully and follow the assembly steps.
- To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
- To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
- Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
- Using the wrong size of screws for a particular part could cause damage to the screw or the part.
- Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.
Warranty Information:
COLAMY promises to repair or replace any COLAMY chair that is found to be
defective in material or workmanship within one year from the date of original
purchase so long as you, the original purchaser, still own it. This is your
sole and exclusive remedy. This warranty is subject to the provisions below.
Exclusions:
- Normal wear and tear, which are to be expected throughout ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY.
- Products that were not installed, used, or maintained by product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Return Policy:
We adopt a 30-day return policy which means that all products purchased on
this website may be returned to us within the timeframe. You need to contact
us within 30 days after the product(s) came into your possession and the
product(s) must be returned to us without any undue delays. Returned products
must be returned in the same condition as they were sent and they must be sent
in their original packaging. If the product is not faulty, (i.e. if you
changed your mind or if you are unhappy with the product for some other
reason), the cost of shipping will fall on you. And it is your responsibility
that the package arrives safely to us so we recommend that you use a courier
service where it is possible to track the shipment. If the product is faulty
when you receive it, please contact us and we will help you out. We reserve
the right to give a partial refund in cases when the product(s) is not in an
unused condition, is damaged, or has missing parts, not due to our error.
Contact Information:
- ASSEMBLY VIDEO : https://example.com/assembly-video
- TEL : 800-507-2215
- WEB : https://colamyhome.com
- E – MAIL : support@colamyhome.com
CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES THAT MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
WARNING: Please read the instructions carefully and follow the assembly steps.
- To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
- To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
- Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
- Using the wrong size of screws for a particular part could cause damage to the screw or the part.
- Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.
WARNING: Please read the instructions carefully and follow the assembly steps.
- To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
- To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
- Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
- Using the wrong size of screws for a particular part could cause damage to the screw or the part.
- Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.
PRODUCT FEATURES
-
Pneumatic Seat Height Adjustment
Pulling the lever upwards enables height adjustment of the seat, then the seat can be locked at a fixed height by releasing the lever. -
Rock Tension Adjustment
Simply adjust the knob counterclockwise to tighten the tension of the rocking. Or loosen the tension by turning the knob clockwise whenever needed. -
Seat Back Locking Mechanism
Simply press the lever down to lock the seat in an upright position. -
Back Support Adjustment
Simply turn the knob clockwise to protrude the back cushion, otherwise, it will retract the back cushion.
SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 250LBS
- Sit in the center of the chair with your back against the backrest
- Do not sit at the front edge of the chair
- Do not push the chair around when a person is sitting in it
- Do not stand on the chair
- Do not push down on the backrest when a person is reclined
- Do not use the chair with more than one person
- Do not place all your weight on the backrest only
ASSEMBLY PARTS AND TOOL
BEFORE YOU GET STARTED, A FEW POINTERS:
- Having a friend to help makes assembly extra easy
- Mind the important safety information
ASSEMBLY INSTRUCTIONS
-
Step 1
Turn the Star Base(6) upside down, then press the Casters(8) into the holes at the end of each base leg, insert the Gas Piston(5) into the center hole of the Star Base, the Gas Piston Cover(7) should be placed over the Gas Piston -
Step 2
Align the Seat Plate(3) over the pre-drilled holes underneath the Seat Cushion(2), and make sure that the front of the Seat Plate(3) is facing the front of the Seat Cushion(2). Attach the Seat Plate(3) to the Seat Cushion(2) using TWO Botls M625mm(9) at the front and TWO Bolts M620mm(10) at the back, tighten all the bolts with the Wrench(13), being careful not to miss-thread the bolts or damage the seat. -
Step 3
Turn the Seat Cushion(2) upright and align the center hole of the Seat Plate(3) over the Gas Piston(5), then push the Seat Cushion(2) down onto the Gas Piston(5) firmly until the connection is secure. -
Step 4
Attach the Arms(4) to the Seat Cushion(2) with FOUR Bolts M8*25mm(11) by using the Wrench(13).- Note 1 : Armrests are labeled with an “L” (left) or “R” (right) to show which sides they should be placed on.
- Note 2 : Do not tighten all the bolts to 100%, make sure it has space to adjust in the next steps.
-
Step 5
Lay the Back Cushion(1) on the seat of the chair with the top of the cushion toward the front. Attach the Back Cushion(1) to the Arms(4) by inserting TWO Bolts M8*25mm(11) in the LOWER holes with the Wrench(13), just 50% is OK.- Note : Do not tighten all the bolts to 100%, make sure it has space to adjust in the next steps.
-
Step 6
Rotate the back of the chair up, then secure it with the TOP TWO Bolts M8*25mm(11) with the Wrench(13). Adjust the balance on each side of the chair, and fully tighten all the bolts at this step. -
Step 7
Align the control handles of the back and adjust over the pre-drilled holes underneath the Seat Cushion(2), attach the handle to the Seat Cushion(2) using TWO Bolts M6*25mm(9), and tighten all the bolts with the Wrench(13). -
Step 8
Use the Plastic Caps(12) to cover the bolt holes on the arms. Now, your chair is successfully installed.
LIMITED WARRANTY
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still own it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
EXCLUSIONS
This warranty does not apply and no other warranty applies to:
- Normal wear and tear, which are to be expected throughout ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY.
- Products that were not installed, used, or maintained by product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.
RETURN POLICY
- We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.
- Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.
- If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.
- If the product is faulty when you receive it, please contact us and we will help you out.
- We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged, or has missing parts, not due to our error.
HOW RETURNS WORK
- To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.
- Then we will provide the return address for the product as soon as possible.
- Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you.
- In addition, if the return is approved, the refund amount will be automatically credited to your original payment method.
TEL
800-507-2215
WEB
colamyhome.com
E-MAIL
support@colamyhome.com
CAUTION : COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES THAT MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>