Eminere Remote 1 LED Lighting

“`html

Product Information

Specifications:

• Product Name: Eminere Remote
• Version: 2.3
• Designed for: Outdoor use
• Fixture Components: Transparent glass cover, Gore tex valve,
  Cable gland M20 (IN), Housing, Mounting brackets, Cable gland M20
  (OUT), Junction box

Product Usage Instructions:

Safety Instructions:

• Always disconnect the fixture from power before cleaning,
  servicing, or installing.

• Avoid looking directly at the LED light emission to prevent eye
  injury.

• Do not use the fixture for underwater installation.

• Avoid extreme heat, dust, or open flames near the fixture.

• Avoid locations subject to possible impacts.

• Ensure the fixture is not covered with cloth or materials
  during operation.

• Operate the fixture only after ensuring the housing is closed
  properly and all screws are tightly fastened.

• Allow the fixture to cool for approximately 30 minutes before
  servicing or maintenance.

• Operate the fixture only after familiarizing yourself with its
  functions.

• Unauthorized modifications are forbidden for safety
  reasons.

• Use the original packaging for transportation.

Fixture Exterior View:

• Transparent glass cover
• Gore tex valve
• Cable gland M20 (IN)
• Housing
• Mounting brackets
• Cable gland M20 (OUT)
• Junction box

Installation:

Mounting the Fixture:

The unit must be installed by a qualified electrician following
national and local electrical codes and regulations.

Connection to Driver:

The Eminere Remote modules should be connected to the E-Box
Remote or E-Box Remote basic as per the Technical specifications
chapter.

FAQ:

Q: What should I do if I accidentally modify the fixture?

A: Any unauthorized modification will void the warranty. It is
recommended to refer servicing to qualified service personnel.

Q: Can the fixture be used for underwater installation?

A: No, the fixture is not designed for underwater use. Avoid
using it in such environments to prevent damage and ensure
safety.

“`

QR code for user manual
Version 2.3

Eminere Remote
Table of contents
1. Safety instructions ……………………………………………………………………………………………………………………………………3 2. Fixture exterior view…………………………………………………………………………………………………………………………………5 3. Installation ………………………………………………………………………………………………………………………………………………5
3.1 Mounting the fixture …………………………………………………………………………………………………………………………..5 3.2 Connection to driver……………………………………………………………………………………………………………………………5 3.3 Wiring of the junction box……………………………………………………………………………………………………………………8 3.4 Example of Control panel in RDM manager…………………………………………………………………………………………..11 4. Software update …………………………………………………………………………………………………………………………………….12 5. Technical specifications …………………………………………………………………………………………………………………………..13 6. Cleaning and maintenance ………………………………………………………………………………………………………………………15 6.1 Disposing of the product ……………………………………………………………………………………………………………………15 7. ChangeLog …………………………………………………………………………………………………………………………………………….16
2

Eminere Remote
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR Eminere Remote ! Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
Unauthorized modification will void warranty.
1. Safety instructions
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
Always disconnect the fixture from power before cleaning, servicing or installing.
LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light output.
The fixture was designed for outdoor use. This fixture must not be used for underwater installation.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust. Do not install the unit near an open flame.
Avoid using the unit in locations subject to possible impacts.
The fixture body never must be covered with cloth or other materials when the fixture is under operation.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or maintenance.
Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons not qualified to operate the fixture.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
Please use the original packaging if the fixture is to be transported.
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock etc.
Refer servicing to qualified service personnel.
3

Eminere Remote
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m. Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of multimedia equipment – Immunity requirements Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia equipment ­ Emission Requirements according to class B. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The [Device] wireless operation is safe and complies to RF Exposure requirements. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Warning for fixtures with Harsh Environment Finish (HEF): Handle with care! Avoid any damage to the painted surface. Damaging the paint may result in corrosion and loss of warranty.
4

2. Fixture exterior view

Eminere Remote

1. Transparent glass cover 2. Gore tex valve 3. Cable gland M20 (IN) 4. Housing 5. Mounting brackets 6. Cable gland M20 (OUT) 7. Junction box
3. Installation
3.1 Mounting the fixture
The Eminere Remote can be arranged in any orientation on a flat, non-flammable surface by means of two mounting brackets (5) which can be tilted by 30°.

3.2 Connection to driver
The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
The Eminere Remote modules should be connected to the E-Box Remote or E-Box Remote basic as stated in the chapter “Technical specifications”.
5

Example of connection

Eminere Remote

The table below states max. number of Eminere Remote modules connected to the E-box Remote/E-box Remote Basic.

Max. number of Emineres Remote connected to the E-box Remote/E-box Remote Basic

Cable length *

Eminere Remote 1

Eminere Remote 2

Eminere Remote 3

Eminere Remote 4

25 m

20

10

6

5

50 m

16

8

5

4

75 m

13

6

4

3

100 m

10

5

3

2

• Cable length is a total cable length between E-box Remote (E-box Remote Basic) and last connected Eminere Remote.

6

Example: Total cable length=L1+L2+L3+L4

Eminere Remote

Max. number of Eminere Remote modules connected to the one output of the E-box Remote/E-box Remote Basic is stated in the following table.

Max. number of Emineres Remote connected to the one output of the E-box Remote/E-box Remote Basic

Eminere Remote 1

Eminere Remote 2

Eminere Remote 3

Eminere Remote 4

16

8

5

4

Example: if you want to connect 20 Emineres Remote 1 to the E-box Remote, you may connect 16 Emineres Remote 1 to output 1 and 4 Emineres Remote 1 to output 2 (at total cable length of 25 m).

7

Eminere Remote
3.3 Wiring of the junction box
1. Unscrew the four screws (9) on the cover (8) of the junction box (7), remove the cover (8) and the gasket (10). 2. Remove the end cap (11) from cable glands before passing cables throw cable glands M20 (3,6).
The cable glands M20x1.5 can be used for cables of a diameter of 7-13mm. 3. Pass the power/data cables through the cable glands (3,6) and connect them to the connection blocks (12, 13). 4. After checking all connections, fill the junction box with synthetic resin. Make sure that the End cap is inserted
in unused cable gland before filling it. At filling of the junction box proceed according instructions stated on the bag of the resin. The connection blocks have to be fully poured in the resin. 5. Place the gasket (10) on the junction box (7) and screw the cover (8) to the junction box (7). Check that all cable glands (and blind flange) and screws are firmly tightened.

Wiring of connection blocks (12,13) in the junction box. CE version

Connector

Vcc

D+

Function

LEDs +

Data +

Colour of wire

Red

Orange

DData White

8

0V LEDs Black

Ground Not connected

US version Connector Function
Colour of wire

Vcc LEDs +
Red

Eminere Remote

D+ Data + Orange

DData White

0V LEDs Black

Ground Yellow/Green

NOTE: Each line of Emineres Remote connected to the LED output of the E-box Remote/E-box Remote Basic has to be terminated at the last fixture. EITHER connect a 120 Ohm resistor between terminals D+ and D- in the last fixture, OR terminate via RDM as described in the user manual for the E-box Remote.
Ensure ONLY the last fixture in the line is terminated using ONE of the above methods!

To keep declared IP rating of the fixture, every cable gland has to be covered with the end cap (11) if the cable gland is not used for cable passing. We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland before inserting it into the body of the gland and an adequate layer of the paste LOCTITE 577 on the thread of the body of gland (if the cable gland was screwed out).
9

Eminere Remote 10

Eminere Remote
3.4 Example of Control panel in RDM manager
The software RDM manager is available on the ROBE website (https://www.robe.cz/support), product RUNIT WTX.
Green arrow saves changes made in the Control panel to the Eminere Remote. 11

Eminere Remote
Manufacturer PIDs Wireless unlink – the item is not active for the Eminere Remote. LED calibration 4byte HEX! (RGBW/RGBA) – the item shows 4 bytes of calibration values for calibrated white colours of RGBW(RGBA) Eminere Remote. E.g.
CTC channel has to be set to some calibrated white colour (21 DMX-1800K, 66 DMX-2700K, 91 DMX-3200K, 141 DMX-4200K, 211 DMX-5600K, 255 DMX-6500K) otherwise the item shows values “ff ff ff ff” (and calibration values cannot be saved to the Eminere Remote). Warning! Changing and saving values in this item will effect calibrated white colour(s) of the Eminere Remote . Insect friendly light – the item effects RGBA Eminere Remote only. If the item is on, blue colour is not used in calibrated white colours. This modification of white lights results in a smaller attraction of white light for insects (mosquitos, moths..). The function is also available from DMX chart (channel Special Function, range 7-10 DMX).
Pixel Swap ­ the item allows you to swap the pixel order (for Eminere Remote 2/3/4 only).
Terminator active – the item allows you to terminate line of Emineres Remote at last Eminere Remote.
4. Software update
Software update of Eminere Remote has to be done by means of the software ROBE Uploader running on PC. The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches Emineres Remote to the update mode automatically. Please see https://www.robe.cz/robe- uploader/ for more information about ROBE uploader and the E-box Remote user manual (E-box Remote Basic user manual).
12

Eminere Remote

5. Technical specifications
Power supply · Input voltage: 48 V · Power consumption: Eminere Remote 1: 20W Eminere Remote 2: 40W Eminere Remote 3: 60W Eminere Remote 4: 80W

Optic

· Light source: Eminere Remote 1: 12 x high power LEDs Eminere Remote 2: 24 x high power LEDs Eminere Remote 3: 36 x high power LEDs Eminere Remote 4: 48 x high power LEDs
· Colour variants: RGBW (W – 6500 K), RGBA, PW (W – 3000 K) · Beam angles: Symetrical: 9°, 15°, 30°, 50°, 65°, 100°
Bi-symetrical: 10° x 30°, 30° x 10°, 10° x 60°, 60° x 10°, 35° x 70°, 70° x 35°, 15° x 90°, 90° x 15°
Asymetrical: Wallwasher, Wide Wallwasher · Projected Lumen Maintenance: L90B10

90.000 hrs, Ta = 25°C / 77°F

Compatible drivers · E-box Remote, E-box Remote Basic
Mounting method · Via two L-shape brackets with adjustment range 30°
Housing · Aluminium extruded body · Tempered glass
Cooling system · Convection
Total heat dissipation · Eminere Remote 1: 51 BTU/h (calculated) · Eminere Remote 2: 102 BTU/h (calculated) · Eminere Remote 3: 154 BTU/h (calculated) · Eminere Remote 4: 205 BTU/h (calculated)

Weight · Eminere Remote 1: 2.0 kg (4.41 lbs) · Eminere Remote 2: 3.1 kg (6.83 lbs) · Eminere Remote 3: 4.1 kg (9.04 lbs) · Eminere Remote 4: 5.1 kg (11.24 lbs)

13

Dimensions (All dimensions in mm [inch]) Eminere Remote 1

Eminere Remote

Eminere Remote 2/3/4

14

Protection factor · CE: IP 67 · US: Suitable for wet location
Impact rating · CE: IK06
Operating ambient temperature range · -20°C /+40°C (-4°F /+104°F)

Eminere Remote

Operating temperature · +67°C @ Ambient +40°C (+153°F @ Ambient +104°F)
Connection ·5-cored cable
Included items · 1 x Eminere Remote · 1 x User manual
Optional accessories ·Mounting Bracket 50 RAL 9011 (P/N 10980521) ·Mounting Bracket 100 RAL 9011 (P/N 10980522) ·Mounting Bracket 200 RAL 9011 (P/N 10980523) ·Mounting Bracket 200 RAL 9006 (P/N 10980663) ·Mounting Bracket 300 RAL 9011 (P/N 10980524) ·Mounting Bracket- Custom length
·Shield For Eminere Remote 1 RAL 9011 (P/N 10980518) ·Shield For Eminere Remote 2 RAL 9011 (P/N 10980519) ·Shield For Eminere Remote 4 RAL 9011 (P/N 10980520)
·Cable for Eminere Remote (P/N 13053336)
6. Cleaning and maintenance

DANGER ! Disconnect from the mains before starting any maintenance or cleaning work
Rinse off loose dirt with low pressure water spray. Wash the housing with a soft brush or sponge and a mild, nonabrasive washing detergent. Rinse it. Maintenance and service operations are only to be carried out by a qualified person. Should you need any spare parts, please use ROBE OEM parts.

6.1 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local regulations and codes.
15

Eminere Remote

7. ChangeLog

This section summarizes changes in the user manual.
Version of Date of issue Description of changes the manual

1.1

08/10/2021 Technical specification changed

1.2

26/11/2021 Optional accessories changed

1.3

01/12/2021 Information about 120 Ohm terminator added

1.4

12/01/2021 Procedure Wiring junction box changed

1.5

26/01/2022 Marking of conection blocks in junction box changed

1.6

07/04/2022 Eminere Remote connection changed

1.7

28/04/2022 Eminere Remote connection changed

1.8

19/05/2022 QR code added

1.9

17/08/2022 Description of installation changed

2.0

09/01/2023 Eminere Remote update added

2.1

10/02/2023 DMX chart ver. 3.2

2.2

11/01/2024 Junction box description of connection changed

2.3

31/01/2024 Control panel of RDM manager added, DMX chart ver. 3.3

Specifications are subject to change without notice. january 11, 2024 Copyright © 2020-2024 Robe Lighting – All rights reserved Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
16

DMX protocol

DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;

Eminere Inground 2/4; Eminere Remote 1/2/3/4;

UVinere 2/4; UVinere Remote 1/2/4

Version: 3.3 (23 modes in total), software version 3.0 and higher

Mode/Channels in all

Mode 1: RGBW(A)-8bit, Mode 2: RGB 8-bit, Mode 3: full RGBW(A)

1

2

3

4 5 6 7 8-10 Mode 4: White-full control, Mode 5: Reduced RGBW(A)

4 3 12 3 6 8 15 Reserved Mode 6- Reduced RGBW(A)+white control

Mode 7- full RGBW(A)+virtual colour wheel
RGBW(A) / RGB modes

Mode/channels

DMX

1 2 3 4 5 6 7 Value

Function

–

–

–

– – -1

Special functions

0 No function

To activate following functions , stop in DMX value for at least 3 sec.

1-2 Save current DMX values to fixture as initial DMX values. 3-4 Show saved initial DMX values 5-6 Run factory demo sequences at switching fixture on (without DMX) 7-8 Insect friendly light On (RGBA version only) 9-10 Insect friendly light Off (RGBA version only)

11-255 Reserved

1 1 1 – 112

Red

0-255 Red LEDs saturation control (0-100%)

–

–

2

–

– -3

Red Fine

0-255 Red LEDs saturation control fine

2 2 3 – 224

Green

0-255 Green LEDs saturation control (0-100%)

–

–

4

–

– -5

Green Fine

0-255 Green LEDs saturation control fine

3 3 5 – 336

Blue

0-255 Blue LEDs saturation control (0-100%)

–

–

6

–

– -7

Blue Fine

0-255 Blue LEDs saturation control fine

4

–

7

– 448

White (Amber)

0-255 White LEDs saturation control (0-100%)

–

–

8

–

– -9

White (Amber) Fine

0-255 White LEDs saturation control fine

–

–

9 1 – 5 10

Green correction

0 Uncorrected white

1-127 Minus green –> uncorrected white

128 Uncorrected white (128=default)

129-255 Uncorrected white –> Plus green

– – 10 2 – 6 11

Colour temperature correction (CTC)

0 No function

1-10 Tungsten dimming 2700 K

11-20 Tungsten dimming 3200 K

21-255 Colour temperature changing from 1800 K –> 6500 K

Type of control
step
step step step step step
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
step proportional
step proportional
step step step proportional

Page 1

DMX protocol

Mode/channels

DMX

1 2 3 4 5 6 7 Value

Function

Type of control

(21-1800K, 66-2700K, 91-3200K,141-4200K, 211-5600K, 255-

–

–

–

– – – 12

6500K)
Virtual Colour Wheel

0 No function

step

1-2 White 1800 K

step

3-4 White 2700 K

step

5-6 White 3200 K

step

7-8 White 4200 K

step

9-10 White 5600 K

step

11-12 White 6500 K

step

13 Blue (Blue=full, Red+Green+White/Amber=0)

step

14-23 Red=0, Green->up,Blue =full, White/Amber=0

proportional

24 Cyan (Red=0, Green=full, Blue =full, White/Amber=0)

step

25-34 Red=0, Green=full, Blue->down, White/Amber=0

proportional

35 Green (Red=0, Green=full, Blue =0, White/Amber=0)

step

36-45 Red->up, Green=full, Blue=0, White/Amber=0

proportional

46 Yellow (Red=full, Green=full, Blue=0, White/Amber=0)

step

47-56 Red=full, Green->down, Blue=0, White/Amber=0

proportional

57 Red(Red=full, Green=0, Blue=0, White/Amber=0)

step

58-67 Red=full, Green=0, Blue->up, White/Amber=0

proportional

68 Magenta (Red=full, Green=0, Blue=full, White/Amber=0)

step

69-78 Red -> down, Green=0, Blue=full, White/Amber=0

proportional

79 Blue (Red=0, Green=0, Blue=full, White/Amber=0)

step

Transition effects

80-87 Rainbow effect (with fade time) from slow-> fast

proportional

88-95 Rainbow effect (without fade time) from slow-> fast

proportional

96-103 Full dynamic white (1800K->6500K->1800K) (with fade time) from proportional

slow-> fast 104-111 Full dynamic white (1800K->6500K->1800K) (without fade time) proportional

from slow-> fast 112-119 Dynamic warm white (1800K-3000K-1800K) (with fade time) from
slow-> fast 120-127 Dynamic warm white (1800K-3000K-1800K) (without fade time)
from slow-> fast 128-135 Rainbow effect + full dynamic white (with fade time) from slow->
fast 136-143 Rainbow effect + full dynamic white (without fade time) from

proportional proportional proportional proportional

slow-> fast 144-151 Blue/Green effect (with fade time) from slow-> fast

proportional

152-159 Blue/Green effect (without fade time) from slow-> fast

proportional

160-167 Red/Blue effect (with fade time) from slow-> fast

proportional

168-175 Red/Blue effect (without fade time) from slow-> fast

proportional

176-183 Green/Red effect (with fade time) from slow-> fast

proportional

184-191 Green/Red effect (without fade time) from slow-> fast

proportional

192-199 Blue/4000K effect (with fade time) from slow-> fast

proportional

200-207 Blue/4000K effect (without fade time) from slow-> fast

proportional

208-215 Green/4000K effect (with fade time) from slow-> fast

proportional

216-223 Green/4000K effect (without fade time) from slow-> fast

proportional

224-231 Red/4000K effect (with fade time) from slow-> fast

proportional

232-239 Red/4000K effect (without fade time) from slow-> fast

proportional

240-255 Reserved

Page 2

DMX protocol

Mode/channels

DMX

1 2 3 4 5 6 7 Value

Function

13

Shutter/Strobe

0-31 Shutter closed

32-63 Shutter open

64-95 Strobe-effect from slow to fast

96-127 Shutter open

128-143 Opening pulse in sequences from slow to fast

144-159 Closing pulse in sequences from fast to slow

160-191 Shutter open

192-223 Random strobe-effect from slow to fast 224-255 Shutter open

– – 11 3 5 7 14

Dimmer

0-255 Light intensity coarse (0-100%)

– – 12 – 6 8 15

Dimmer Fine

0-255 Light intensity fine

Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved All Specifications subject to change without notice

Type of control
step step proportional step proportional proportional step proportional step
proportional
proportional

Page 3

DMX protocol

DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;

Eminere Inground 2/4; Eminere Remote 1/2/3/4;

UVinere 2/4; UVinere Remote 1/2/4

Version: 3.3 (23 modes in total)

Mode/Channels in all

Mode 11: White selection, Mode 12: WW + CW

11

12

13

14-16 Mode 13: Only dimmer

3

4

2 Reserved Mode 13 is suitable for UVinere and UVinere Remote

TW and PW modes

Mode/channels

11

12

13

DMX Value

Function

1

–

–

White colour selection

0 – 255 White from 2700 K – 6500 K

–

1

–

Warm White

0 – 255 Warm White LEDs saturation control (0-100%)

–

2

–

Cool White

0 – 255 Cool White LEDs saturation control (0-100%)

2

3

1

Dimmer

0 – 255 Light intensity coarse (0 – 100%)

3

4

2

Dimmer Fine

0 – 255 Light intensity fine

Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved All Specifications subject to change without notice

Type of control proportional proportional proportional proportional proportional

Page 4

DMX protocol

DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4; Eminere Inground 2/4; Eminere Remote 1/2/3/4;

Version: 3.3 (23 modes in total)

Mode/Channels in all

17

18

19

20

16

12

8

8

Mode/channels

17

18

19

20

1

1

–

–

2

2

–

–

3

3

–

–

4

–

–

–

5

4

–

–

6

5

–

–

7

6

–

–

8

–

–

–

9

7

–

–

10

8

–

–

11

9

–

–

12

–

–

–

13

10

–

–

14

11

–

–

15

12

–

–

16

–

–

–

–

–

1

–

–

–

2

–

–

–

3

–

Mode 17: RGBW(A) pixels, Mode 18: RGB pixels, Mode 19: TW pixels,

21-23 Mode 20: PW dimmer pixels

Reserved

Pixel modes

DMX Value

Function

Type of control

Red 1 -Eminere 1/2/3/4

0 – 255 Red LEDs saturation control (0-100%)

proportional

Green 1-Eminere 1/2/3/4

0 – 255 Green LEDs saturation control (0-100%)

proportional

Blue 1-Eminere 1/2/3/4

0 – 255 Blue LEDs saturation control (0-100%)

proportional

White (Amber) 1-Eminere 1/2/3/4

0 – 255 White LEDs saturation control (0-100%)

proportional

Red 2 -Eminere 2/3/4

0 – 255 Red LEDs saturation control (0-100%)

proportional

Green 2-Eminere 2/3/4

0 – 255 Green LEDs saturation control (0-100%)

proportional

Blue 2-Eminere 2/3/4

0 – 255 Red LEDs saturation control (0-100%)

proportional

White (Amber) 2-Eminere 2/3/4

0 – 255 White LEDs saturation control (0-100%)

proportional

Red 3-Eminere 3/4

0 – 255 Red LEDs saturation control (0-100%)

proportional

Green 3-Eminere 3/4

0 – 255 Green LEDs saturation control (0-100%)

proportional

Blue 3-Eminere 3/4

0 – 255 Blue LEDs saturation control (0-100%)

proportional

White (Amber) 3-Eminere 3/4

0 – 255 White LEDs saturation control (0-100%)

proportional

Red 4-Eminere 4

0 – 255 Red LEDs saturation control (0-100%)

proportional

Green 4-Eminere 4

0 – 255 Green LEDs saturation control (0-100%)

proportional

Blue 4-Eminere 4

0 – 255 Blue LEDs saturation control (0-100%)

proportional

White (Amber) 4 -Eminere 4

0 – 255 White LEDs saturation control (0-100%)

proportional

Warm White 1 -Eminere 1/2/3/4

Warm White LEDs saturation control (0-100%)

proportional

Cool White 1-Eminere 1/2/3/4

0 – 255 Cool White LEDs saturation control (0-100%)

proportional

Warm White 2-Eminere 2/3/4

Page 5

DMX protocol

Mode/channels

DMX

17

18

19

20

Value

Function

0 – 255 Warm White LEDs saturation control (0-100%)

–

–

4

–

Cool White 2-Eminere 2/3/4

0 – 255 Cool White LEDs saturation control (0-100%)

–

–

5

–

Warm White 3-Eminere 3/4

0 – 255 Warm White LEDs saturation control (0-100%)

–

–

6

–

Cool White 3-Eminere 3/4

0 – 255 Cool White LEDs saturation control (0-100%)

–

–

7

–

Warm White 4 -Eminere 4

0 – 255 Warm White LEDs saturation control (0-100%)

–

–

8

–

Cool White 4 -Eminere 4

0 – 255 Cool White LEDs saturation control (0-100%)

–

–

–

1

Dimmer 1

0 – 255 Light intensity coarse (0 – 100%)

–

–

–

2

Dimmer Fine 1

0 – 255 Light intensity fine

–

–

–

3

Dimmer 2

0 – 255 Light intensity coarse (0 – 100%)

–

–

–

4

Dimmer Fine 2

0 – 255 Light intensity fine

–

–

–

5

Dimmer 3

0 – 255 Light intensity coarse (0 – 100%)

–

–

–

6

Dimmer Fine 3

0 – 255 Light intensity fine

–

–

–

7

Dimmer 4

0 – 255 Light intensity coarse (0 – 100%)

–

–

–

8

Dimmer Fine 4

0 – 255 Light intensity fine

Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved All Specifications subject to change without notice

Type of control proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional

Page 6

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>