JOYROOM JR-L015 22.5W Powerbank User Manual
- June 17, 2024
- Joyroom
Table of Contents
JOYROOM JR-L015 22.5W Powerbank
Product introduction
The product is a 22.SW power bank with Lightning & type-C dual cables. It can
charge 4 devices simultaneously.
It supports PD3.0, QC3.0, AFC, SCP superfast charge protocols and more.
It provides fast charging for mobile phones, tablets, e-book readers, watches,
game consoles, etc.
Flashlight design, handy lighting in daily life and travel.
The product has a built in smart chip and a variety of safety protections such
as over -charge, over-discharge, over-voltage and over-temperature protection,
etc.
Product diagram
Parameters
Model | JR-L0lS |
---|---|
Battery | Polymer Lithium Battery |
Capacity | 20000mAh 3.7V (74Wh) |
Rated Ca pa city | 12000mAh (5V 3A) |
Type-C Input | 5V 3A 9V 2A |
Micro Input | 5V 2A, 9V 2A |
Type-C Out put | 5V 3A, 9V 2.22A, 12V l.67 A |
USB-A Output | 10V 2.25A, 5V 3A, 9V 2A,12V 1.5A |
Type-C Cable Output | 10V 2.25A, SV __ 3A, 9V 2A, 12V 1.5A |
Lightning Cable Output | 5V ::-:-: 2. 4A |
Multi-port Output | 5V 3A (Max) |
Size | 1527129mm |
Material | PC+ABS fireproof material |
Net weight | 448g |
Packing list
-
Power bank x1
-
Charging cable x1
-
Manual & Warranty card x1
Operation instructions
Power on/off
- Press the button once to power it on.Connect device to have it automatically power on.
- If no device is connected in 30s, the product automatically power off.
LED light
- In turned on status, you can check the remaining power capacity.
- If no device is connected in 30s, the product will enter sleep mode and the LED light will turn off automatically.
Flashlight
Double-click to turn on the flashlight and double-click again to turn it off.
Low-current charging mode
- In turned on status, long press power button for 5s, it will enter low-current charging mode, and the LED light will start to flash.
- To exit low-current charging mode, long press power button for 5s again, the LED light will be constant on, which means tow-current charging is turned off.
- Low-current charging mode is mainly used for charging low-power electronics as wireless earphones, bracelets, watches, etc.
Recharge the power bank
Use the USB to Type-C cable to connect the Type-C input of the power bank with
the charger. The LED digital display keeps flashing which means the power bank
is being recharged.
When it is fully recharged, the LED display will stop flashing and be constant
on.
Using environment
Using ambient temperature: 0°c to 40°C, non-tropical area Storage ambient temperature: 0°c to 40°C.
Warm reminders
- Please fully charge the power bank when using it for the first time.
- Please pull out the charging cable in time after fully charged to avoid energy loss.
- Please use suitable cables and accessories to make the power bank function normally.
- Do not drop, impact, disassemble the product or try to repair it by yourself.
- Do not store the product in a wet place or immerse 1t in water.
- Do not expose or store the product near a heat source or flammable materials.
- Do not leave this product in the car. The high temperature of sunlight will damage the product.
- Please keep it out of the reach of children to avoid improper use.
- Do not put any foreign object into the USB/Type.C input/output ports of the product to avoid short circuit or damage.
- Please charge the power bank fully at least once every for months to prolong its service life.
- Please stop using the product in case of swelling. leakage deformation of battery and other abnormalities.
- Do not disassemble the product by yourself. Any shortened service life or damage caused by improper use or storage of the product by customer will not be borne by our company.
- Avoid using chargers with excessive output current or load.
After-sale service regulations:
- Consulting service: Please read the User Manual carefully before using the product and keep it for future use.
- Replacement service: The company undertakes that if there is product failure within 7 days from the date of purchase that is not caused by human error, the customer can choose between replacement and repair freely (if the appearance is in good condition, it will be repaired) provided that the product, its accessories ana packaging are complete and in good condition. The customer can ask the local authorized dealer to deal with it.
- Warranty service: In case of product failure within the warranty period that is not caused by human error, free warranty service will be provided within one year. In case of product failure caused by human error, we will charge for relevant repairing.
- Charged repairing service· In case of product failure within one to three years from the date of purchase, charged repairing service will be provided. Users need to pay for the components, transportation and labor costs.
Warranty exceptions (you need to pay for relevant service):
- Expired the warranty period;
- There’s alteration on the Warranty Card, or the serial number is inconsistent with the product itself;
- Product damage caused by accidents or human error (e g customer fails to use, maintain and store the product according to the Use, Manual; incorrect installation, improper power supply, water intrusion, etc)
- Failure to provide Warranty Card and valid invoice (except chat you
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>