DWVO Basketball Hoop Outdoor 10 FT Stand Instruction Manual

DWVO Basketball Hoop Outdoor 10 FT Stand

Installation Alert

To save your time and safety, please read the instructions carefully and check all
the accessories in the package before installing, weighing, displaying, and disassembling the basketball stand, master the installation steps and details before starting to install this product requires at least 2 adult installations, please prepare 2 movable wrenches.
If there are any problems with the installation and use, please contact the after-sales staff at any time. We will help you in time to reduce your trouble or damage to the product.

Part list

Steps

1. Install universal wheel
   As shown,fix the 4pcs Universal wheel(J) on Iron base(O), and Press the brake pad

2. Install base and pole brace
   Remove the 2 Bolts in the middle of the base(O), then fix one end of the pole brace(H) on Base(O) and tighten the 2 Bolts.

3. Install the base, bottom pole and pole brace
   Fix the L-shaped iron sheet(I) on Base(O) by 2 bolt(C), then use 1 Bolt(G) fix the L-shaped iron sheet(I) and Bottom pole(Y), finally fix another end of the pole brace(H) on Bottom pole(Y)by bolt(G).

4. Please bend the board bracket(K) into a Y shape before installation, fix Rim(L) and Board bracket(K) on Backboard(N) by 2 Spring screw(A) and 2 Bolt(B). Then use 2 Bolt(D) to fix the top of Board bracket(K) on the back of board(N) tightly.
   Install Rim
   Insert the 2 iron wires of the fixed A–=: block into the hole slots of the rim as shown.

5. lnstall short support rod and long support rod
   Fix the Short support rod(S) and long support rod(T) on the board bracket(K) by 2 Bolt(R), then fix the Short support rod(S ) and long support rod(T) on the Top pole(W) by 3 Bolt(Q) as shown.

6. Install the long support rod, lifting rod and spring:  As shown, Fix the long support rod (T) and lifting rod (BB) with bolt (P).

7. Then hook one end of the spring (CC) onto any small hole of the Board Bracket (K), and then use a 2mm thick rope loop to cover the other end of the spring (CC) and pull it towards the bolt (Q) in the middle of the short support rod (5).
   As shown, Fix top pole(W) and middle pole(X) together by 2 bolt (F). then fix middle pole(X) and bottom pole(Y)together by 2 bolt (F). After that, fix the triangular block (AA) on the middle pole (X) with
   2 bolt (Fl), and finally fix the lifting rod (BB) and triangular block (AA) with bolt (E).

8. Another installation procedure using height:
   As shown, Fix top pole(W) and bottom pole(Y) together by 2 bolt (F). After that, fix the triangular block (AA) on the bottom pole (Y) with 2 bolt (F1 ), finally fix the lifting rod (BB) and triangular block (AA) with bolt (E ).

9. Install the net

10. Finally, place a counterweight bag filled with sand or stones on the base to make the basketball hoop more stable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>