PHILIPS QP1324 OneBlade Trimmer First Shave Blue Instruction Manual

PHILIPS QP1324 One Blade Trimmer First Shave Blue

IMPORTANT SAFETY INSTRUCTIONS

When using an electric product, basic precautions
should always be followed, including the following:

Read all instructions before using this product.

DANGER

To reduce the risk of electric shock:

• To charge the product, only use a USB power source on a certified product with output rating 5 V, ≥ 1 A. For safe charging in a moist environment (e.g. in a bathroom), only use an IPX4 (splash-proof) power source. A suitable power source (e.g. Philips HQ87) is available via www.philips.com/support. If you need support finding the correct USB power source, contact Philips support at 1-866-800-9311. Using a noncertified USB power source may cause hazards or serious injuries.
  

• Keep the USB cable and the USB power source dry **(Fig. 2).

**

• Do not reach for a corded product that has fallen into water. Unplug immediately from the power  outlet.
• Do not place or store the product where it can fall or be pulled into a tub or sink. Do not place or drop the product into water or other liquid.
• This product does not work while it is connected to the power outlet. Except when charging, always unplug this product from the power outlet.
• Remove USB power source from power outlet and product before cleaning the product with water.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the product.

• Use this product only for its intended household use as described in this manual. Misuse can lead to  hazards or serious injuries. Do not use attachments not recommended by Philips Electronics Ltd (Canada).

• Never operate this product if it has a damaged  USB power source, if it is not working properly, after it has been dropped or damaged, or after the product or the USB power source has been dropped into water. For assistance call 1-866-800-9311.

• Keep the USB cable and the USB power source away from heated surfaces.

• Never drop or insert any object into any opening.

• Do not use the USB power source in or near a power outlet that contains an electric air freshener to prevent damage to the USB power source.

• Do not use product outdoors or operate where  aerosol (spray) products are being used or where oxygen is being administered.

• Always check cutting units and other attachments and accessories before you use the product. Never use the product with a damaged cutting unit, attachment or accessory, as injury may occur.

• Always attach the USB cable to the USB power source and the product first, then attach the USB power source to the power outlet. To disconnect, set all controls to ‘off’ position. Then remove the USB power source from the power outlet.

• Plug USB power source directly into power outlet. Do not use an extension cord.

• Unplug USB power source before plugging in or unplugging the product.

• The batteries used in this product may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F) or incinerate.

• Only use original Philips accessories or consumables.

• Charge, use and store the product at a temperature between 5 °C and 35 °C.

• Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.

• If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.

• Do not place products and their batteries in microwave ovens or on induction cookers.

• Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.

• If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.

• When you handle batteries, make sure that your hands, the product and the batteries are dry.

• To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag before you discard them.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

SAVE THESE INSTRUCTIONS

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.

Getting started

Charging One Blade

Low Battery

When the battery is low, the motor will run more slowly.

Charging with the USB charging cable

1. Insert the small plug into the One Blade handle, then insert the USB plug into a USB power adapter. Plug the adapter into a 120V AC outlet (Fig. 3).

Note: A suitable power source (e.g. Philips HQ87) is available via www.philips.com/support.

2. To fully charge the battery, allow it to charge for 8 hours. The charging indicator will remain illuminated when the product is connected to the mains.

3. Unplug the adapter from the power source, then remove the charging cable from the handle.
   Note: for safety reasons, the product can only be used when the charging cable is not attached.

4. A fully charged One Blade has an operating time of at least 30 minutes.

Turning One Blade on and off

To turn the product on or off, simply press the power button once (Fig. 4).

Tip: If the product does not turn on, check that the battery is fully charged and remove the charging cable from the handle before pressing the power button. If the product still does not turn on, check that the blade is clean and undamaged.

Using One Blade

Shaving and edging

Your One Blade is waterproof, so you can shave in the shower or with foam or gel.

1. To shave, make long, slow and steady strokes **(Fig. 5),

applying gentle pressure with the blade flat against your skin (Fig. 6).

** Move the blade back and forth to make use of both sides of the blade.

2. To edge or contour your beard (Fig. 7),
   
   mustache or sideburns, make short strokes with the blade held perpendicular to your skin (Fig.   8).
   
   Alternatively, make small strokes with the blade flat against your skin.

3. For best results, clean your One Blade after each use.

Maintenance

Cleaning One Blade

Clean after each use

For a quick clean, simply blow on the blade and any accessories to remove hairs and dirt **(Fig. 9).

**

Thorough cleaning

1. Turn on your One Blade and rinse it under the tap with cold or lukewarm water (Fig. 10).

If you shave with foam or gel, be sure to remove all residue after each shave.

2. Allow your One Blade and any accessories to air dry completely before storage.

Note: Do not bang the handle on the sink or any hard surface, a this may damage the product (Fig. 11).

Do not use a towel or cloth to dry the blade.

Storage

Store your One Blade in a safe, dry location where it will not be crushed, banged, or subject to damage. To protect the blade, store the product with the protection cap attached. Do not wrap the cable around the product when storing, and do not place or store the product where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.

Blade Replacement

When to replace the blade

For optimal cutting and gliding performance, we advise you to replace the blade every 4 months or when it no longer provides the shaving or trimming results you expect. Depending on your usage behavior, the exact lifetime of the blade could be longer or shorter.

Wear indicator

A replacement symbol will gradually appear on the blade as you use it. When the replacement symbol is fully visible, it’s recommended to replace your blade **(Fig. 12).

**

Note that accessories such as guards can prevent the replacement symbol from becoming visible.

Tip: the replacement symbol resembles the arrow icon on the handle of your One Blade. For older blades, a green rectangle may appear in place of the replacement symbol.

If blade is damaged

If you notice any damage on your blade, please replace it immediately.

How to replace the blade

Before you begin, make sure your One Blade is turned off and any guards are removed.

1. Gently pull off the old blade, holding it by both short sides (Fig. 13).
   

2. The old blade can be discarded with your normal household waste.

3. Remove your replacement blade from the packaging. To avoid damaging the blade, don’t use sharp objects or crush the packaging.

4. Hold the new blade by both short sides and insert the protrusions on the bottom of the blade into the slots on the OneBlade handle (Fig. 14).
   

5. Gently press the blade downwards onto the handle until it clicks into place.

6. Your One Blade is now ready to use.

Disposal

• This product contains a rechargeable lithium-ion battery which must be disposed of properly.
• Contact your local town or city officials for battery disposal information. You can also call 1-888-224-9764 or visit www.call2recycle.ca for battery drop-off locations.
• For assistance, visit our website www.philips.com/support or call 1-866-800-9311 toll free.
• Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com.

Support

For all product support such as frequently asked questions, please visit www.philips.com/support. Full Two-Year Warranty Philips Electronics Ltd warrants this new product against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.*

The blade is not covered by the terms of this warranty because it is subject to wear and tear.

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

In order to obtain warranty service, simply go to www.philips.com/support for assistance. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty. NOTE: No other warranty, written or oral, is authorized by Philips Electronics Ltd.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, province to province or country to country.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.

*Read enclosed instructions carefully.

75 % recycled paper

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>