Sanwom B09BJ75FFF Front 2 PCS Car Seat Covers Installation Guide
- June 17, 2024
- Sanwom
Table of Contents
Sanwom B09BJ75FFF Front 2 PCS Car Seat Covers
Product View
Parts
Installation Instruction
-
Put the back of the front seat cover on the seat
-
Zip thespers on both sides of the neck
-
Insert the disc into the gap and pull it out from the gap on the back to fix it
-
Put the headrest cover on the headrest and fasten the buckles
-
Headrest cover installation completed
-
Fix the base elastic hook under the seat
-
Front seat cover installation completed
THANK YOU
Rear Seat Cover Installation
The First Installation Method of the Bottom Seat Covers (No Need to Remove the Rear Seat)
The indentation and wrinkle produced by vacuum packaging are normal phenomena, which can be restore in 3-5 days.
-
Connect B with A&C with velcro.
-
Clasp the buckle at the headrest.
-
Stick the middle backrest with Velcro
-
Insert the discs into the seat gap
-
Lay the bottom seat cover and insert the discs into the seat gap
-
Place the elastic bands on both sid
-
Stick the middle seat cover.
-
Push the foam on the middle seat cover into the gap.
-
Rear seat cover Installation Completed
For rear seats can be uplifted,the BEST way to install is as bellow:
-
Take rear seats out.
-
Put the covers on the rear seats
-
Connect Round Discs to the middle elastic straps.
-
Push the Round Discs intel the gap.