legrand PW-101D Passive Infrared Dimmable Wall Switch Occupancy Sensor Instruction Manual

legrand PW-101D Passive Infrared Dimmable Wall Switch Occupancy Sensor

Product Information

Specifications

• Model: PW-101D
• High sensitivity and dense coverage for exceptional performance
• Defaults to Manual-ON operation for maximum energy savings
• Color-matched lens and low profile for appealing design
• Pushbutton dimming control and optional locked preset level for many lighting types
• Selectable operation modes: walk-through, test, and presentation
• Part of a comprehensive line of PIR, Ultrasonic, and Dual Technology wall switch sensors
• PIR Coverage: Major motion 35′ (10.6m), Minor motion 20′ (6.1m)
• Load Rating: 120 VAC, 0-700 W

Product Usage Instructions

Operation

• The PW-101D passive infrared (PIR) dimmable wall switch sensor can turn lights OFF and ON based on occupancy.

Dimming Control

• The PW-101D can dim lighting from a minimum level of 10% to full output. Press and hold the push button to ramp up or dim down the lighting.
• The dimming direction reverses when the pushbutton is released momentarily and pressed again.

Applications

• Well suited for small, enclosed spaces with a clear line of sight of the occupant. Common applications include small offices and small conference rooms.

Installation

• Refer to the provided wiring diagram for proper installation.
• For best performance, use this sensor in spaces no larger than 15′ x 12′.

FAQ

Q: How do I change the preset light level?

• A: To change the factory preset light level of 85%, refer to the DIP switch settings in the specifications section of the manual.

Q: What is the coverage pattern of the sensor?

• A: The sensor has a PIR coverage of 35′ (10.6m) for major motion and 20′ (6.1m) for minor motion.

OVERVIEW

PASSIVE INFRARED DIMMABLE WALL SWITCH OCCUPANCY SENSOR PW-101D

DESCRIPTION

• The PW-101D passive infrared (PIR) dimmable wall switch sensor can turn lights OFF and ON based on occupancy.
• It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.

OPERATION

• The PW-101D replaces existing wall switches and fits in a single gang junction box. The PW-101D is a three-wire switch requiring a neutral connection.
• The factory default operation is for manual-ON. It uses advanced PIR technology to detect occupancy and keep lighting on when it is needed.
• Once the space is vacated and the time delay elapses, the lights automatically fade OFF.
• The ramp and fade times can be fast or slow.
• DIP switch settings allow for control options including Auto-ON to the last used level or a locked preset level, walk-through, and test modes.

DIMMING CONTROL

• The PW-101D can dim lighting from a minimum level of 10% to full output. When the pushbutton is pressed and held, lighting will ramp up or dim down.
• The dimming direction is reversed when the pushbutton is momentarily released and then pressed and held again. To save energy and increase lamp life, the PW-101D is shipped with a factory preset of 85%.
• This preset level may be changed to any lighting level.

APPLICATIONS

• The PW-101D sensor is well suited for small, enclosed spaces with a clear line of sight of the occupant.
• Common applications include small offices and small conference rooms.

FEATURES

• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Zero-crossing for long relay life
• The vandal-resistant lens combines precise coverage with durability
• Choice of Manual-ON or Auto-ON operation
• Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
• Test mode allows quick and easy adjustments
• Selectable audible and/or visual alerts for impending shutoff
• Preset ramp and fade times
• In automatic mode, the sensor returns automatically to Auto-ON after lights are turned off manually; which is ideal for presentations
• LED indicates occupancy detection
• Optional light-level sensing with a simple setup
• Service mode allows the sensor to operate as a service switch in the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates
• BAA/TAA-compliant models available

SPECIFICATIONS

• 120 VAC; 50/60 Hz @ 120 VAC, 0-700 W; @ 277 VAC
• Incandescent, MLV, ELV, cold cathode, or two-wire fluorescent ballast
• Coverage: Major motion 35’ x 30’, Minor motion 20’ x 15’
• Fade rates: Ramp on, 1.5 seconds; fade off, 5 seconds
• Sensitivity adjustment: PIR (high/low)
• Time delays: 5, 10, 15, 20, 25 or 30 minutes, walk-through, test-mode
• Dimensions: 2.73” x 1.76” x 1.83” (69.3mm x 44.7mm x 46.5mm) L x W x D
• UL and cUL listed
• Five-year warranty

CONTROLS & SETTINGS

Product Controls

DIP Switch Settings

COVERAGE & WIRING

Coverage Pattern

For best performance, Wattstopper recommends using this sensor in spaces no larger than 15’ x 12’.

Wiring Diagram

ORDERING INFORMATION

fluorescent dimming ballast)
| PW-101D-W-U| White
| PW-101D-LA| Light Almond
| PW-101D-I| Ivory
| PW-101D-I-U| Ivory
| PW-101D-G| Gray
| PW-101D-B| Black

• Order wall plates separately.
• U = BAA/TAA compliant; the product is compliant with the Buy American Act and Trade Agreement Act.
• WWW.LEGRAND.US/WATTSTOPPER

Documents / Resources

| legrand PW-101D Passive Infrared Dimmable Wall Switch Occupancy Sensor [pdf] Instruction Manual
PW-101D Passive Infrared Dimmable Wall Switch Occupancy Sensor, PW-101D, Passive Infrared Dimmable Wall Switch Occupancy Sensor, Infrared Dimmable Wall Switch Occupancy Sensor, Wall Switch Occupancy Sensor, Switch Occupancy Sensor, Occupancy Sensor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>