Juicy Couture 4464 DIY Lux Pillow Instruction Manual

June 17, 2024
Juicy Couture

Juicy Couture 4464 DIY Lux Pillow

Juicy-Couture-4464-DIY-Lux-Pillow-PRODUCT

Product Information

Specifications:

  • Velveteen pillow cover
  • Polycotton cord – 16m (17.5 yd)
  • Pillow with polyester filling
  • 2 gem sticker sheets
  • Transfer tool
  • Juicy CoutureTM transfer sheet

Product Usage Instructions

Graphic Transfer Sheet:

  1. Remove the protective paper from the Juicy CoutureTM graphic transfer sheet.
  2. Use a wet cloth to wet the back of the graphic transfer sheet while pressing on the image. Ensure thorough wetting, especially under the image.
  3. Do not remove or reposition the sheet before the image is completely transferred.

Add Filling:

Fill the pillow cover with the provided polyester filling.

Decorating with Gem Stickers:

  1. Decorate the crown with gem stickers.
  2. Choose desired locations for gem stickers on the pillow cover before sticking them on.

Creating Tassels:

  1. Measure and cut a 3m (3.28 yd) piece of pink cord.
  2. Wrap the longest end of the cord around the tassel two times and tie both ends together with a double knot.
  3. Cover the knot with craft glue or clear nail polish, allow to dry, and trim any excess thread.
  4. Trim the tassel ends evenly to be 5cm (2 in) long.
  5. Repeat steps for all tassels.

Warnings:

WARNING! Not suitable for children under 3 years. Functional long cord poses a strangulation hazard. Adult supervision required. Stickers not intended for use on skin or nails. Keep away from small children. Do not machine wash; gently wipe with a damp cloth.

Contact Information:

MAKE IT REAL
MDSS GMBH, SCHIFFGRABEN 41, 30175, HANNOVER, DE

Frequently Asked Questions

Q: Can the pillow cover be machine-washed?

A: No, the pillow cover should not be machine-washed. It is recommended to gently wipe it with a damp cloth.

Q: Are the gem stickers reusable?

A: The gem stickers are for one-time use only and are not reusable.

CREATE YOUR OWN JUICY COUTURE™ SIGNATURE PILLOW

CONTENTS

  • 1 velveteen pillow cover
  • 1 pillow with polyester fillingJuicy-Couture-4464-DIY-Lux-Pillow-FIG \(1\)
  • 1 polycotton cord 16 m (17.5 yd)
  • 1 tassel card
  • 1 transfer tool
  • 1 Juicy Couture™ transfer sheet
  • 2 gem sticker sheets

JUICY COUTURE CROWN

  • Place the pillow cover on a flat surface with the zipper at the bottom.
  • Remove the protective paper from the Juicy Couture™ graphic transfer sheet
  • Flip the graphic transfer sheet, then center it and place it sticky side down onto the pillow coverJuicy-Couture-4464-DIY-Lux-Pillow-FIG \(9\)
  • Use a wet cloth to wet the back of the graphic transfer sheet while pressing on the image. Make sure the sheet is thoroughly wet, especially where the image is.Juicy-Couture-4464-DIY-Lux-Pillow-FIG \(10\)
  • Firmly rub the graphic transfer sheet with the plastic tool to transfer the image. Avoid moving the sheet
  • Carefully remove the graphic transfer sheet to reveal the imageJuicy-Couture-4464-DIY-Lux-Pillow-FIG \(12\)

ADD FILLING

  • Gently place the pillow in the pillow cover and close it with the zipperJuicy-Couture-4464-DIY-Lux-Pillow-FIG \(13\)

MAKE IT SPARKLE

Decorate the crown with gem stickers.

  • Tip: Choose the desired locations of the gem stickers on the pillow cover before sticking them on.Juicy-Couture-4464-DIY-Lux-Pillow-FIG \(14\)

MAKE THE TASSELS

  • Measure and cut one 3 m (3.28 yd) piece of pink cord.
  • Measure and cut another two 25 cm (9 ¾ in) pieces of pink cord.
  • Wrap the 3 m (3.28 yd) piece around the tassel card, then pass one of the 25 cm (9 ¾ in) pieces around the 3 m (3.28 yd) pieceJuicy-Couture-4464-DIY-Lux-Pillow-FIG \(17\)
  • Make a double knot using the 25 cm (9 ¾ in) piece around the 3 m (3.28 yd) piece.Juicy-Couture-4464-DIY-Lux-Pillow-FIG \(18\)
  • Remove the tassel card in the center of the wrapped cord. Use the other 25 cm (9 ¾ in) piece to make a double knot around the wrapped cord.Juicy-Couture-4464-DIY-Lux-Pillow-FIG \(19\)
  • Wrap the longest end of this same cord around the tassel 2 times and attach both ends together with a double knot
  • Cover the knot with craft glue or clear nail polish. Allow 5 minutes to dry and cut off any excess thread after the knot
  • Trim the ends of the tassel evenly. It should be 5 cm (2 in) long.
  • Repeat steps 1 through 8 for the other 3 tassels
  • Tie a double knot with the 25 cm (9 ¾ in) pink cord to attach the tassel to one loop corner on the pillow cover, then cover the knot with craft glue or clear nail polish.Allow 5 minutes to dry and cut off any excess thread after the knotJuicy-Couture-4464-DIY-Lux-Pillow-FIG \(24\)
  • Repeat step 10 for the other 3 tassels.Juicy-Couture-4464-DIY-Lux-Pillow-FIG \(25\)

LEGEND

  • Scissors
  • Craft glue
  • Let dry
  • Repeat
  • Double knot
  • Center

WARNING!

CHOKING HAZARD. Small parts. Not suitable for children under 3 years. STRANGULATION HAZARD. Functional long cord. Adult supervision required. Caution: Stickers not intended for use on skin or nails. Pillow is for ornamental use only. Keepaway from small children. Do not machine wash. Gently wipe with a damp cloth.

MAKE IT REAL

1700 REISTERSTOWN RD STE 211 PIKESVILLE, MD 21208, USA 410-995-8685

Download our free app or go to

for full detailed instructions

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals