SOUNDEXTREME ACC-SEJV6 Universal Golf Car Mounts User Guide

SOUNDEXTREME ACC-SEJV6 Universal Golf Car Mounts

Specifications

• Dimensions: 1.48 in / 37.6 mm x 1.49 in / 37.9 mm x 4.75 in / 120.7 mm
• Unit Weight: 0.55 lbs (each)
• Mount Thickness: Approximately 0.19 in / 4.8 mm

Product Usage Instructions

Mounting Instructions

1. Hold your soundbar up to the horizontal, 1 x 1 square tube for positioning.
2. Mark the desired mounting location and lay down the 3 Rubber Strips to cover the flat sides.
3. Slide the J-Hook Mounts over each Rubber Strip on the square tube.
4. If needed, position the J-Hook Mounts above or below the square tube based on roof clearance.
5. Ensure a tight fit between the J-Hook Mounts and the square tube using the Rubber Strips.
6. Secure the J-Hook Mounts with M8 1.25 x 50mm Bolts, Washers, and Nuts.
7. Tighten all hardware securely to complete the installation.

FAQ

1. Q: Can this mounting bracket be used for off-road vehicles?
   A: This bracket is designed for light-duty, on-road driving applications. For off-road vehicles used in high-impact conditions, heavy-duty mounting options are recommended. Please refer to our website for suitable alternatives.

2. Q: What is included in the package?
   A: The package includes (2x) J-Hooks, (2x) EPDM Rubber Strips,(2x) M8-1.25 Nylon Locknut, (2x) M8-1.25 x 50mm Bolt, (4x) M8 Flat Washer, and Long BHSC Bolt.

These Universal Golf Car Mounts allow for a secondary mounting position for all SoundExtreme Powersports Amplified Soundbars onto a 1” x 1” square tube. Please read all of the instructions before you begin installing your soundbar.

Mounting Instructions

1. In order to properly space out the J-Hook Mounts, first loosely attach them onto the ¼-20 mounting rail on the top of your soundbar.

2. Next hold your soundbar up to the horizontal, 1” x 1” square tube that you plan on mounting it to.

3. Once you have marked the desired mounting location, lay down  the 3” Rubber Strip. The Rubber Strip will cover the 3 flat sides that the J-Hook makes contact with the horizontal, square tube.

4. Slide the J-Hook Mounts over each Rubber Strip on the horizontal, square tube.
   Note: The J-Hook Mounts can be positioned above or below the square tube, based on how much clearance you have with the roof of your golf car.

5. The Rubber Strips are designed to fit tightly between the J-Hook Mounts and the square tube. If you having trouble sliding the J- Hook Mounts onto the Rubber Strips while the Mounts are attached to the soundbar, it may be easier to remove them from the soundbar and install them one at a time.

6. Once the J-Hook Mounts are installed on the square tube, secure each into position with the M8 1.25 x 50mm Bolt, 2 Washers, and 1 Nut.

7. Next, you can mount your soundbar to the 2 (or more) J-Hook Mounts that you have installed using the supplied ¼-20 Bolt and Washer.

8. Be sure to tighten all of your hardware securely in order to finish your installation.

Specifications

Dimensions

Unit Weight
0.55 lbs (each)

Mount Thickness
Approximately 0.19 in / 4.8 mm

CAUTION:
This mounting bracket is designed for light-duty, on-road driving applications. If your installation is for an off-road vehicle (UTV/ATV/4×4) used in high-impact driving conditions, please see our website for heavy-duty mounting options recommended for your vehicle.

LIMITED MANUFACTURER’S WARRANTY:
The Universal Golf Car Mounts are covered by a 1-year limited warranty that covers defects in workmanship and / or materials for a period of 1 year from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified or used for a purpose other than the one for which they were manufactured. The warranty is valid only for the original owner who purchases the unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of-stock or discontinued product with a comparable product. Discontinued products may not be available for warranty replacement. Any contents are NOT covered by the limited manufacturer’s warranty. Warranty terms may be revised without notification at the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product & warranty information.
Universal Golf Car Mounts by ECOXGEAR, a division of Grace Digital Inc., San Diego, California. Designed in California. Made in China.

What’s in the Bag

• (2x) J-Hooks

• (2x) ¼-20 x 0.75” Long SHCS Bolt

• (2x) ¼-20 Washer

• (2x) 1/16” Thick x 1” Wide x 3” Length EPDM Rubber Strip

• (2x) M8-1.25 Nylon Insert Locknut

• (2x) M8-1.25 x 50mm Long BHSC Bolt

• (4x) M8 Flat Washer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>