U S GENERAL 58713 56-72 Work Center Hutch Owner’s Manual
- June 17, 2024
- U S GENERAL
Table of Contents
U S GENERAL 58713 56-72 Work Center Hutch
Product Information
- Specifications:
- Product Name: 23g 56/72 WORK CENTER HUTCH
- Model Numbers: 58713, 70328, 70327, 70399, 70398, 70397, 70396, 70395, 70330, 70331, 70332, 70333, 70335, 70337, 58709, 70339
Product Usage Instructions
- Safety Instructions:
- It is crucial to follow the safety guidelines provided in the manual to prevent any injuries or accidents while using the Work Center Hutch. Some key safety precautions include:
- Do not sit, stand, or climb on the item.
- Avoid letting children play near the item.
- Ensure even distribution of load to prevent tipping.
- Always secure the hutch within the lip on top of the chest or cabinet.
- Assembly Instructions:
- Before assembling the Work Center Hutch, ensure that all parts are intact and undamaged. Follow these steps:
- Place the hutch inside the inner lip on top of the chest or cabinet.
- Ensure the hutch sits flush on the chest or cabinet.
- Leave equal space on either side of the hutch.
- Maintenance and Servicing:
- Maintain the Work Center Hutch regularly to ensure safe usage. Here are some maintenance tips:
- Inspect the general condition periodically.
- Wipe external surfaces with a clean cloth.
FAQs
- Q: What should I do if any parts are missing or broken during unpacking?
- A: In case of missing or damaged parts, please contact our customer support at 1-888-866-5797 for assistance.
- Q: Can children use this item as furniture?
- A: No, this item is not intended for use by children. Please keep children away from it to prevent accidents.
- Q: Are assembly tools included with the product?
- A: Tools required for assembly and servicing may not be included. Make sure you have the necessary tools before starting assembly.
IMPORTANT SAFETY INFORMATION
Use Precautions
- DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
- Do not allow children to play with or near this item. This item is NOT children’s furniture.
- Evenly distribute the load from the bottom up. Uneven loading causes tipping. Be aware of dynamic loading! Sudden movement may briefly create excess load causing tipping.
- Close before moving. Do not pull, Push to move.
- Center securely within the lip on top of the chest or cabinet.
- Place on top of matching chest or cabinet only.
- Do not place objects on top or hang objects offside.
- Have an assistant help place it on the chest or cabinet.
- Do not lift while loaded.
- Do not use it as a stand-alone unit.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
- Read the instruction manual before assembly and/or use.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
document including all text under subheadings therein before setting up or use
of this product.
Note: Two or more people may be required to complete the following steps.
- Place Work Center Hutch inside inner lip on top of chest or cabinet.
- Make sure the Work Center Hutch sits flush on the chest or cabinet.
- Leave equal space on either side of Work Center Hutch.
Maintenance and Servicing
Procedures not specifically explained in this document must be performed only by a qualified technician.
WARNING: TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use.
- PERIODICALLY, inspect the general condition of the Work Center Hutch. Check for:
- loose hardware,
- misalignment or binding of moving parts,
- cracked or broken parts,
- any other condition that may affect its safe operation.
- Wipe external surfaces with a clean cloth.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Diagram
Part| Description| Qty| | Part| Description|
Qty
---|---|---|---|---|---|---
1| Grommet| 8| 8| Key| 4
2| Rubber Mat| 1| 9| Trim Screw (ST4.8 x 7.2) for 56 in.| 4
3| Bearing| 2| Trim Screw (ST4.8 x 7.2) for 72 in.| 6
4| Nut| 2| 10| Gas Strut| 2
5| Lock Rod| 1| 11| Bin| 1
6| Door Trim| 1| 12| Bracket| 1
7| Lock| 1|
Limited 90-Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY INSTEAD OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Record Serial Number Here:
- Note: If the product has no serial number, record the month and year of purchase instead.
- Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable.
Specify UPC number when ordering:
- 56″ Red: 58713 UPC193175445087
- 56″ Yellow: 70328 UPC 193175495907
- 56″ White: 70327 UPC 193175495891
- 56″ Orange: 70399 UPC 193175496652
- 56″ Green: 70398 UPC 193175496645
- 56″ Gray: 70397 UPC 193175496638
- 56″ Blue: 70396 UPC 193175496621
- 56″ Black 70395 UPC 193175496614
- 72″ Red: 58709 UPC 193175444912
- 72″ Yellow: 70339 UPC 193175496010
- 72″ White: 70337 UPC 193175495990
- 72″ Orange: 70335 UPC 193175495976
- 72″ Green: 70333 UPC 193175495952
- 72″ Gray: 70332 UPC 193175495945
- 72″ Blue: 70331 UPC 193175495938
- 72″ Black: 70330 UPC 193175495921
CONTACT
- 26677 Agoura Road
- Calabasas, CA 91302
- 1-888-866-5797
- Hutch
- For technical questions, please call 1-888-866-5797.
- 58713 70328 70327 70399 70398 70397 70396 70395 70330 70331 70332 70333 70335 70337 58709 70339
- Visit our website at: http://www.harborfreight.com.
- Email our technical support at: [email protected].
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please call
1-888-866-5797 as soon as possible.
Copyright© 2022 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools. Diagrams
within this manual may not be drawn proportionally. Due to continuing
improvements, the actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
WARNING: Read this material before using this product. Failure to do so
can result in serious injury. SAVE THIS MANUAL.
Save This Manual
- Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures.
- Write the product’s serial number in the back of the manual (or the month and year of purchase if the product has no number).
- Keep this manual and the receipt in a safe and dry place for future reference.