MTB HOPPER Coach 4 Ramp User Manual
- June 17, 2024
- MTB HOPPER
Table of Contents
MTB HOPPER Coach 4 Ramp
Safety Information
The kicker is designed only for MTB and BMX bikes.
Body position in the air:
- Stop pedaling ~6 meters before the kicker and stand on your pedals. The crank arms should be parallel to the ground.
- Keep your hips above the axis of the rear wheel.
- Lean your torso forward.
- Slightly bend your elbows.
- Keep your head straight, look forward and not under your wheels.
- Before the jump, lower your seat as much as possible.
Use it responsibly.
Go through all the steps before riding to ensure safety. If you have the opportunity, train together with more experienced riders. Good luck at improving your riding skills!
MTB HOPPER is designed for longevity, to withstand any weather and provide good grip with tires. We recommend to store it in a dry place.
Always wear your helmet. It is recommended to wear knee pads, gloves and other safety equipment. wear your helmet. It is recommended to wear knee pads, gloves and other safety equipment.
Momentum speed for beginners: 12 km/h – 20 km/h (7 mph – 12 mph). Feels similar to your running speed.
Keep the handlebars straight while riding on to the kicker and in the air. Approach the kicker in a straight line. Do not brake on the kicker. Jump once you feel confident about it.
MINI COACH RAMP ASSEMBLY
Follow engraved numbers on the parts. The numbers are showing the order of assembly. The numbers are on all connection points and have to match: (1 to 1; 2 to 2 and so on).
Press lock part down and turn 90 degrees.
Grab the rope and fasten to the hooks on both sides.
Make sure that the roof is fitting correctly.
FULL SIZE COACH RAMP ASSEMBLY
Follow engraved numbers on the parts. The numbers are showing the order of assembly. The numbers are on all connection points and have to match: (1 to 1; 2 to 2 and so on).
Press lock part down and turn 90 degrees
Mount Legs onto the Front Part
Logo of the Front Part must be facing down
Slide the Front Part into the C-type Arms on both sides
Lift the Front Part up
Fasten the Rope to the hooks on both sides.
Mount the Roof and make sure that it is fitting correctly
Grab the rope and fasten to the hooks on both sides.
GEOMETRY SETTINGS OF COACH RAMP
-
Table Top Setting
-
Drop Setting
-
Long Jump Setting
-
Airy Jump Setting
-
Leg Height Adjustment
A different Height of the ramp can be chosen for each of the settings
PACKING INSTRUCTIONS
Customer Support
Please send us your first jump photo or video and we will share it. info@mtbhopper.rnm
Celebrate your personal victories!
Documents / Resources
| MTB
HOPPER Coach 4
Ramp
[pdf] User Manual
Coach 4 Ramp, Ramp
---|---