MTB HOPPER Skinny Hopper Mobile Ramp User Manual
- June 17, 2024
- MTB HOPPER
Table of Contents
MTB HOPPER Skinny Hopper Mobile Ramp
Product Specifications
- Product Name : Skinny
- Color : Black
- Material: Not specified
- Assembly Required : Yes
Product Usage Instructions:
Skinny Assembly Instructions
- Insert the side part into the black part with the logo facing downwards.
- Don’t worry about misalignment, as it is intentional.
- Push the side part inwards.
- Push the roof part downwards.
- Release the side part while holding the roof pressed down and let the side part hook on it.
- Flip the Skinny upside down to ensure the roof is fitting correctly.
- Repeat the same steps on the other side of the Skinny.
Packing Instructions
- Put the part with the logo facing downwards.
- Take two legs that are on the opposite sides of the Skinny and put them to the center.
- Use the rope of the two legs to hook to each other.
- Connect the other two legs in the same way.
FAQ
- Q: What should I do if the parts don’t fit together properly during assembly?
- A : Ensure that you follow the assembly instructions carefully and check for any obstructions or misalignments. If the issue persists, contact customer support for assistance.
- Q: Can I disassemble the Skinny once it’s assembled?
- A : Yes, you can disassemble the Skinny by following the assembly instructions in reverse order. Be gentle to avoid damaging the parts.
USING INSTRUCTIONS
SKINNY ASSEMBLY INSTRUCTIONS
PACKING INSTRUCTIONS
Please send us your first jump photo or video and we will share it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>