MTB HOPPER LITE Portable Jump Ramp Backpack for Skate User Manual
- June 17, 2024
- MTB HOPPER
Table of Contents
MTB HOPPER LITE Portable Jump Ramp Backpack for Skate
Safety Information
The kicker is designed for MTB and BMX bikes.
Body position in the air:
- Stop pedaling ~6 meters before the kicker and stand on your pedals. The crank arms should be parallel to the ground.
- Keep your hips above the axis of the rear wheel.
- Lean your torso forward.
- Slightly bend your elbows.
- Keep your head straight, look forward and not under your wheels.
- Before the jump, lower your seat as much as possible.
Use it responsibly.
Go through all the steps before riding to ensure safety. If you have the opportunity, train together with more experienced riders. Good luck at improving your riding skills!
MTB HOPPER is designed for longevity, to withstand any weather and provide good grip with tires. We recommend to store it in a dry place.
Always wear your helmet
It is recommended to wear knee pads, gloves and other safety equipment.
Momentum speed for beginners: 12 km/h – 20 km/h (7 mph – 12 mph). Feels similar to your running speed.
Keep the handlebars straight while riding on to the kicker and in the air. Approach the kicker in a straight line. Do not brake on the kicker. Jump once you feel confident about it.
LITE RAMP ASSEMBLY INSTRUCTIONS
Follow engraved numbers on the parts. The numbers are showing the order of assembly. The numbers are on all connection points and have to match: (1 to 1; 2 to 2 and so on).
Insert side part into the logo board. Don’t worry about misalignment – it is like that on purpose.
Make sure that the roof is fitting correctly.
Grab the rope and fasten to the hooks on both sides
PACKING INSTRUCTIONS
Customer Support
Celebrate your personal victories!
Please send us your first jump photo or video and we will share it. info@mtbhopper.rnm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>