VEVOR SSX80 Series Commercial Ice Maker Machine Instruction Manual

VEVOR SSX80 Series Commercial Ice Maker Machine Instruction Manual

We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

The warning diagram and operation safety instructions

Note : Be sure to keep this manual in a location that users can access at any time.

Safe operation precautions.

Electrical safety matters

1. The working voltage of the ice maker should be consistent with the famous brand. If the voltage is not in this range, please purchase a voltage regulator above 1000W.
2. Be sure to connect the ground wire and ground it safely. The ground wire should not be connected to the water pipe or gas pipe.
3. In order to protect the compressor, do not start the ice machine again within 10 minutes after power off or shutdown.
4. Please do not connect other electrical appliances to the same socket.
5. If the power cord is damaged, in order to avoid danger, it must be replaced by a person arranged by the manufacturer or a qualified professional.
6. The electrical control system has a voltage of more than 36V, do not open and touch when used, if you need to repair, please contact the manufacturer or have relevant qualified technical personnel to deal with.

WARNING : Do not operate the ice machine when a gas leak occurs in the environment in which the ice machine is located. Because the spark caused by the opening and closing of the plug or the temperature controller may cause a fire, the air source should be cut off and the window should be opened to allow air to circulate.

Installation Precautions
Requirements for handling and moving conditions:
When transporting, the cabinet should be kept as straight as possible, and the inclination should not exceed 45°at most. Do not invert and lie horizontally.

To operate the ice machine properly and get the best performance, place the ice machine in the following conditions:

1. Solid and flat ground
   Place the ice machine on a solid, level surface to avoid excessive vibration and noise.

2. Keep away from the heat source
   Avoid placing the ice machine near hot equipment such as gas stoves or stoves. Heating the ice machine can cause a decrease in cooling efficiency.

3. Avoid direct sunlight
   If the ice machine is installed in direct sunlight, it may cause abnormal work and may shorten the working life of the ice machine.

4. Dry area
   Avoid placing the ice machine in a wet area, for example, near a faucet or near a sink.
   

5. Nothing will fall to the ice machine.

6. Installation and operating instructions shall be provided with cautionary statements concerning the handling, moving, and use of the ice maker to avoid either damaging the refrigerant tubing, or increasing the risk of a leak.

7. The installation and operating instructions shall indicate that component parts shall be replaced with like components and that servicing shall be done by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.

8. The installation instructions shall indicate the ice maker is to be installed in accordance with the Safety Standard for Refrigeration Systems, ASHRAE 15. In addition, the instructions shall indicate the ice maker shall not be installed in corridors or hallways of public buildings.

Environmental conditions:

This equipment is designed in accordance with the following conditions:

1. Indoor use.
2. The altitude is not higher than 2000 meters.
3. The ambient temperature is in the range of 10 ° C to 32 ° C.
4. When the temperature is not higher than 31 °C, the maximum relative humidity is 80%, and the maximum relative humidity decreases linearly with increasing temperature.
5. The main power supply voltage fluctuation does not exceed ±10% of the rated voltage.
6. In accordance with the equipment installation level (overvoltage level) transient overvoltage.

This appliance is used for similar purposes such as:

• a kitchen area in a store, office or other workplace;
• Farmers as well as hotels, motels and residential environments; Family
• hotel environment;

Catering industry and similar non-retail applications. This appliance is not intended for general household use.

Correct operation

When using for the first time and continuous operation, please follow the rules below.

1. Connect the ice maker to a special socket (the power supply is consistent with the famous brand).
2. The ice machine needs to run for a long time to stabilize the temperature in the ice storage room, and minimize the number of door opening during this period.
3. The ice machine is surrounded by a cooling system for cooling the system. It is forbidden to block the items.
4. After completing the inspection of the operation of the ice machine, turn on the power of the ice machine and let the machine start making ice.

• Use an independent water source for the ice machine and check it regularly to prevent low water pressure, fluctuations or filter clogging.

• Do not store any debris in the ice storage room, or freeze or freeze any food in the ice storage room and keep the ice shovel clean..

• When the ice storage bucket is plasticized, it should be lightly opened and closed. Do not drop the door. After the ice is finished, please close the sliding door of the ice storage bin.

• The ice machine should be kept away from heat sources. It is strictly forbidden to use in high temperature or low temperature environment. Try to avoid direct sunlight, so as not to affect the heat dissipation of the
  machine.

• Do not directly wash the surface of the ice machine by splashing water.
  Otherwise, it may cause short circuit or electric leakage.

• After using the ice machine for a period of time, if it is left for a long time, it should be energized every 4 months for 4 to 6 hours.

Installation instructions

Due to the product is updated and classified continuously, the machine you get may not be as the same as the picture completely in the manual. Please give your understanding. We will improve it continuously.

1. It should use the filtered drinking water with normal temperature to make ice.
2. The pressure of water supply should be controlled between 130-550 kpa. If the water pressure is over high, please install a relief valve .Do not let the hose be under high pressure.
3. Please connect the outside branch hose of the machine to the tap of the drinking water filter. The filter has a sign to show the outlet and inlet.
4. Connect the inlet of the filter to the tap of the drinking water.
5. To ensure the smooth drainage of the machine, it is important to ensure that the drainage pipeline is below the bottom surface of the machine. The drainage pipe of the machine with a drainage pump has to be lower than the bottom surface of the storage bin.

Warning
It’s merely permitted to connect to the drinking water

All-in-one installation

The instructions of the filter installation.

Operating Instructions

Function description of four-button digital tube operation panel.

Button Operation Instructions

• Operation process

1. Plug in the power, click the ice machine switch button, the ice machine starts to run.
2. Open the water inlet solenoid valve to enter the water. After the water level rises, the floating ball floats up. When the water level reaches the requirement, the water inlet valve is closed, and the cleaning program is run. After the cleaning is completed, it will automatically enter the ice making cycle.
3. When the thickness of the ice cube reaches the set thickness, the deicing program starts, the solenoid valve starts to work, the water pump stops working, the heat enters the evaporator, and the ice cube falls for about 1.5 minutes. When the ice cube falls, the ice falling baffle Flip and open the reed switch, when the reed switch closes again, the machine goes back into the ice making process.
4. The compressor does not stop during the entire ice making and deicing process.
5. When the ice bucket is full of ice and the magnetic reed switch cannot be closed automatically, the machine will automatically stop working. When enough ice cubes are removed and the magnetic reed switch is closed again, the machine will start up with a delay of 3 minutes and re-enter the ice making process.

• Ice thickness adjustment

1. Press and hold the + key for 3 seconds and wait for the displayed number to start flashing, then click the +- key to adjust the thickness of the ice cubes. After clicking the + key, the displayed number will be minutes.
2. Each addition of 1 means that the ice making time will increase by 1 based on the current ice making time. Minutes, the maximum is 25 minutes; each minus 1 means that the ice making time is reduced by 1 minute based on the current ice making time, and the minimum is -9 minutes. After increasing the ice making time, the ice cubes will become thinner.
3. With the adjusted ice making time, after the current ice cube is deiced, the next ice cube will be made according to the newly set ice making time.

Click the blue light switch to turn it on, otherwise turn it off.

• Scheduled power-on function

1. In the standby state, press the preset timing key to execute the timing power-on function, the timing LED light is on, and the displayed number is the remaining power-on time, and the unit is hour.
2. In the timing power-on state, click + or – to adjust the remaining power-on time.
3. After executing the scheduled power-on, click the scheduled reservation button to cancel the scheduled power-on.

• Ice full function

1. When the ice bucket is full of ice and the ice baffle cannot be closed automatically, the machine will stop working automatically.
2. When the ice cubes are used up, the ice baffle will reset, and the machine will automatically start up after a delay of 3 minutes. If the ice maker stops due to fluctuations in voltage and water pressure, and does not make ice or de-ice, please first After unplugging the power for 5 minutes, turn on the power to test the machine. Due to the change of water temperature and ambient temperature, ice may sometimes appear in the sink. If the ice is severe, please unplug the power for 10 minutes and then turn on the power again.
3. When not in any setting interface, force the drainage pump to work for 60 seconds and then end (including standby and startup) by continuously pressing the “-” button twice (effective within 2 seconds).
4. When the machine is powered on, the drainage pump automatically starts for 20 seconds every 15 minutes and then turns off. Note: The machine which is in full ice, ice making, deicing, adding water, lacking water, and short-term cleaning all belong to the startup mode.

Precautions

Please follow the requirement of this manual to maintain your machine in order to increase the reliability and longevity of this ice machine, also good maintenance can avoid the over energy consumption.

1. Clean the environment around the ice machine frequently to keep it clean, and do not block the louvers used for ventilation of the ice machine.

2. The shell can be cleaned with a neutral detergent, and then wiped with a soft cloth. If necessary, commercial stainless steel cleaners and polishes can be used.

3. Filters should be checked regularly and replaced with new filters immediately if damaged.

4. The water tank of the ice machine and the interior of the ice storage room can be washed directly with water pipes. Do not use too much water pressure, and do not directly flush the water pump and the part above the
   ice tray to prevent the circuit from being soaked.

5. Maintenance of air-cooled ice machine condenser: Clean the air-cooled condenser once every three months. Use a soft brush or a vacuum cleaner with a brush to brush the condenser fins up and down along the direction of the fins to avoid damaging the fins and affecting the cooling effect.

Before you dial the telephone of the after-sale service
If the ice machine runs abnormally, please dial the telephone of after-sale service . But, you need to confirm the following cases.

1. If the water head is normal or not.
   The correct way to check it is to loosen the inlet joint(6 branch connector) behind the machine. if it leaks normally when you loosen the joint to a required value, it means normal. Otherwise, there is no water.

2. Confirm the machine if it is electrified or not.
   Our ice machines are all fully automatic. So, some of models don’t have electric switch. You can ask for a electric technician to help you check. Mainly, you should pay attention to the socket.

3. The model number and serial number.
   There is a nameplate on the front board, and there are model number and serial number on the side board.

Troubleshooting of this series of machines

Circuit diagram

Small ice maker mother board wiring diagram.

Made in China

Technical Support and E-Warranty Certificate
www.vevor.com/support

References

• Automatic Product Studio
• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>