Aihand PW301 Cordless Pressure Washer User Manual
- June 17, 2024
- Aihand
Table of Contents
Aihand PW301 Cordless Pressure Washer User Manual
INSTALLATION INSTRUCTION
Thanks for choosing the Aihand Portable Power Washer. Please carefully read the user manual and related warnings before using the product. If you have any questions during usage, please feel free to contact us.
NOTE:
If there is water in the machine, please don’t get upset. The product is not
second-hand. In order to ensure that you receive a product that is in perfect
condition, each of our products undergoes a pumping test before leaving the
factory.
Specifications
| Motor Power | 350W |
|---|---|
| Motor Type | Brushless Motor |
| Max.Flow | 5L/min |
| Battery Voltage | 21V 4.0Ah |
| Battery Runtime | 45 mins |
| Charge Time | 5-6 hrs |
| Pressure | 970 PSI |
| High Pressure Hose Length | 16.5 FT |
| Max Water Inlet Temperature | 0°C-40°C |
| Net Weight | 2.5 lbs(Battery included) |
| Spray Nozzle | 0-180°/6-In-1 |
When unpacking, make sure all the parts shown in Amazon.com are included. If any parts are missing or broken, please contact us via email shown on the cover of this manual as soon as possible. Then take out the product and accessories, install and use according to the operation procedure.
Pinking List
-
Portable Power Cleaner
-
Water Hose
-
0-180°Nozzle
-
Charger
-
Foam Cannon
-
Water Filter
-
6-in-1 Nozzle
-
Extension Pole
-
21V Battery *2
-
Storage Bag
Note:
Before loading the package after use, please make sure that there is no
residual moisture in the pressure washer. Residual water may damage the
battery.
Installation
STEP1: Installation of Intake Hose
-
Pull the ring from the intake hose and aim it at the pressure washer.
-
Make sure that the water inlet hose is connected with the water inlet without any gap, and loosen the pull ring of the water inlet connector. And the water inlet installation is completed.
STEP2: Filter Connected to Water Source
-
Put the filter on the other end of the inlet hose into water source.
Note: Dip the water inlet hose connector with a small amount of water. A small amount of water can be dipped in the inlet hose connector to reduce friction and make installation more convenient. Shaking the filter continuously in the water will remove the air from the water pipe.)
-
The filter must be completely immersed in water. If the filter floats on the water surface, air will enter the water pipe and the machine cannot be used normally. And shaking the filter continuously in the water will remove the air from the water pipe.
STEP3: Installation/Removal of 0-180°Nozzle
-
First install the extension pole on the pressure washer.
-
Press the 0-180°nozzle directly into the slot at the front of the extension pole and rotate it.
-
Installation of the 0-180°nozzle is completed.
Removal
Turn the nozzle 180° counterclockwise and force the nozzle out.
STEP4: Installation/Removal of 6-In-1 Nozzle
- First install the extension pole on the pressure washer, and then turn the 6-in-1 nozzle on the extension pole.
- Turn the 6-In-1 nozzle 180° counterclockwise and force the nozzle out.
Removal
Turn the 6-In-1 nozzle 180° counterclockwise and force the nozzle out.
STEP5: Installation/Removal of Foam Pot
-
Align the foam pot with the front slot of the pressure washer, press it in and rotate it to complete the connection.
-
The button can be rotated to adjust the the concentration of the foam tank. And the foam pot installation is completed.
Removal
Turn the foam pot 180° counterclockwise and force the nozzle out.
STEP6: Installation and Removal of Battery
-
Installation: Align the battery with the slot at the bottom of the pressure washer, slide it in, and the battery is installed successfully.
-
Removal: Press the button on the battery and push out the chute to remove it.
Product Display and Usage
Display Diagram of Pressure Washer
Product Usage
Press the switch to immediately release water
Turn off the pressure washer immediately after releasing the switch
Product Usage
When the pressure washer does not need to work, press the button, the pressure washer switch will automatically lock, which will enhance your safety after use, to avoid adults or children accidentally touch the switch and get hurt.
Aihand pressure washer provides two pressure modes of high and low pressure. By pressing the L/H button, you can quickly switch the working mode of the pressure washer. It can meet your multiple stress needs and is a good helper for your cleaning.
Note:
In order to save water and electricity, you can give priority to using low
voltage gear.
FAQ
| FAQ | Cause | Solution |
|---|---|---|
| **** Without water suction | Machine is too high above water | Holding the |
pressure washerbelow 1.5m from the ground
Filter is clogged with foregin matter| Check and replace the water hose, or
contact Aihand Customer Service for replacing
Intake pipe bending| Straighten out inlet hose and reconnect
The pump froze because of the cold weather| Restart after thawing
**** Battery Failures| Insufficient battery charging time| The battery
requires close to 5-6 hrs of charging time to be fully charged.
Battery runs out| Charge or replace new battery pack
Faulty battery charger| Replace the charger or contact Aihand Customer
Service.
Battery pack is broken| Contact Aihand Customer Service to replace the Makita
battery.
Sudden increa- se in effluent pressure or ab- normal water| The head of
the water gun is blocked by foreign matter| Use a needle to clear the nozzle
or replace a new gun head
**** Machine no working| Battery pack not installed| Reinstallation
Battery runs out| Charge or replace new battery pack
Battery pack is broken| Contact Aihand Customer Service to replace the Makita
battery
Machine pressure discontinuity| Air in pump| Check that joints and hose arein
good
---|---|---
Machine in low voltage mode| Normal
Incorrect or broken nozzle.| Check or replace the nozzle.
Pressure washer stop working| Battery is dead| Charge or replace new battery
Gun head stocked| Clear the nozzle or replace the new gun head
Internal water leaking| Using chemical acid source or assembly cause| Avoid
using chemical water sources
Unpacking tips:
Put the box flat on the table or floor and open it.
Repair and Maintenance
- Before each use, please check whether the pressure washer and parts are damaged. If it is damaged, stop using the machine and contact
- Aihand Customer Service to replace the parts.
- Intake hose and filter must be cleaned after use. The storage box can help to keep away oxidation.
- Do not use chemical acid or muddy water. Must use clean and pollution-free water.
- After using the pressure washer, it should run for a few seconds to drain the residual water in the machine to avoid oxidation or freezing due to weather, and store it in a dry cool place. Waste disposal: For damaged accessories and packaging materials, they must be sorted and recycled, and relevant labels must be made.
- Please don’t put the machine in the trunk of the car to avoid the high temperature causing the car to catch fire. Warning: Do not use chemical acid or muddy water. Must use clean and unpolluted water.
NOTE:
We do not provide garden hose adapter.Although it is troublesome to add water
to the bucket, in order to prolong the life of the machine, we do not
recommend connecting the faucet directly because:
- The Cordless pressure washer connected to the faucet cannot filter impurities in the water, and it is easy to block
- The machine is connected to the faucet, and the pressure of the tap water will complete the damage to the machine water pump;
- When the machine is connected to the faucet, water may automatically come out of the nozzle, resulting in waste of water resources.
Charging Indicator
Full charging: Green LED on
Charging status: Red LED on
The light on the battery’s power display will not be on while charging.
Safety Instructions
Read the entire important safety information section before set up or use of this product:
- Make sure it is the original machine and accessories (charger an battery).
- When using, please do not direct the water to the crowd or other charged components.
- Keep children away from area where the battery is charged.
- Stop using the product if the battery pack or charger has been dropped, bumped or damp.
- Someone must be present when charging the battery.
- Be sure to use original battery pack (forbidden to use other charging accessories or charging methods without authorization or with the consent of the original manufacturer).
- Do not charge in high temperature or unattended environment.
Batteries contain lithium. To protect the environment, discarded batteries
should be sorted and recycled, and should not be thrown away at will!
Do not throw into water or close to fire sources.
About Warranty
Dear Customer:
Thanks for you put trust in Aihand.
Aihand is a skilled designer and experienced producer who specializes in Portable Power & Outdoor items. This washer is suitable for outdoor car washing, watering green plants, cleaning walls, floors, etc. It can also be used for cleaning indoors.
Good Service and one-year general Worry-free Warranty for quality related issues is our promise, under our warranty, you can return any product (Non- human damage) within one month of purchase for a refund or a replacement of the product (Shipping fee/ Import duties/ Taxes/ Charges are not included). Please feel free to contact us about the issue. Our support team will get back to you within 24 hours.
Do you want to become Aihand VIP, update your general warranty (1 year) to 2 years’ warranty？
We are glad to provide you with sincere service.
Best regards,
Aihand Customer Service
Please message us:
Customer Service: [email protected]
Official Website: www.aihandstore.com
Whats App: +86 19128451839
Aihand
WhatsApp contact
