KaiDeng WVC-Modem PV System Data Collector User Manual
- June 6, 2024
- KaiDeng
Table of Contents
KaiDeng WVC-Modem PV System Data Collector
Suitable for R3 version WVC series micro inverter
■ Support all wvc series micro inverter
■ Each Modem can monitor 46pcs micro inverters
■ Can be used by PC,mobile and PAD
■ 433MHz+Wifi double modules
■ Check the data by day,month or year
■ Dual antenna transceiver design
■ Support local interview and remate control
■ Choose APP or Web
Modem intelligent distribution network description (TCP/IP Mode)
Wi-Fi Modem appearance
Parameter
Input Voltage range
| automatic shift 120/ 230V
Input frequency range|
50 / 60Hz
Max Output Power
| 10 Watt
G.W.|
0.35KG
Size
| 160 x100 x32mm
Communication mode|
433MHz+WIFI
Transmission distance
| l000M(open range)
Waterproof|
IP23
Running Mode
Modem indicator & button
Ready to work:
- Install the “Mxeasylink” tool on the smartphone
- A wireless router that can access the Internet normally
Download mxeasylink Apps
Please install the app in your smartphone (ios downloadpassword:mxchip)
KD Montoring system
The KDM photovoltaic monitoring system supports the full range of WVC microinverters, which can realize real-time data visualization and historical data preservation and analysis. The KDM monitoring system analyzes the data in the MODEM, and through graphics and graphic display, users can understand the operation of the power station. At the same time, the KDM system provides full monitoring of the operation of the inverter, and users can monitor the operation, find and locate. Users can choose WEB or APP for system operation status query, data analysis and equipment management.
Intelligent Management
- Controlling my intelligent power station by multisystem anywhere and angtime
- One-click , power, power, efficiency, income query
- Multiple power stations, inverter centralized management mode
Distribution steps (Android)
-
Connect your mobile phone to wireless wifi, and open the “MXEASYLINK” client, the software will automatically recognize your current wireless signal source, you only need to enter the WiFi password, as shown in Figure A-1, A-2 ((When the phone cannot be automatically recognized, please enter the SSID manually)
-
Quickly press the reset button and release your hand. At this time, the “Reday” light is off, and the “Link” light will flash quickly, as shown in Figure B-1, B-2
-
Press “Send Network Configuration”, the modem enters the network configuration state, the link indicator will change from fast flashing to slow flashing, as shown in Figure C-1 and C-2
-
After the network configuration is successful, the mobile phone network configuration software will display as shown in Figure D-1, and the Reday and Link indicators on the Modem will be on as shown in Figure D-2.
Distribution steps–iOS
-
Open the “MXEASYLINK” APP: click the”+” in the upper right corner of the interface, enter the network configuration interface (E-1 ), enter the WiFi name “SSID” and WiFi password “Password”, and then select the mode as “easylinkAWS”, As shown in Figure E-2. When the express flashing state of (E 4) appears, press the “Star EasylinkASW Mode” button.
-
Quickly press the reset button of the collector and release the hand. At this time, the “Reday” light is off, and the “Link” light will flash quickly, as shown in Figure E-3, E-4;
-
When the network configuration is successful, the client terminal will display as shown in E-5. After clicking the “Confirm” button, the Reday and Link lights on the Modem will change to a steady state E-6
KDM Monitoring System
Ready to work:
Install the “KDM Monitoring System” tool on your Android Phone
Download: http://jzi6.cn/MiTp6q (You can scan the QR to Download)
Note: This application only supports Android. If you have an !phone, please
operate in your browser and log in to the website:
kdm.kaidengdg.com
Create account
Open KDM software F-1, first use KDM monitoring system, please click Register
F-2, register KDM account and save F-3
ADD Station
After logging account, click “Add Station” Like Figure G-1, fill in the
Information and fill in the 8- digit code on the back of the Modem into the
corresponding items. For example, G-2. For the electrical box option, please
select “None”, and fill in “1” “Figure G-3
ADD Inverter
When the creation of the power station is completed, the page will
automatically jump to the interface for adding an inverter (make sure the
inverter has been installed correctly), fill in the 8-digit ID on the inverter
and click Add such as H-1, after the addition is completed You can return to
query the working status of the inverter H-2 and view the basic operating
status of the power station H-3.
- The Wi-Fi modem changes its working mode (press and hold the reset button until the following display appears):
TCP/IP mode: Release the Re day indicator from “off-+on-+off”;
Internet ofThings mode: Release the Reday indicator from “off-on’ ;
System communication transmission diagram
MODEM uses dual-mode communication mode to build data communication between the inverter and the cloud server. Users only need to install the KDM monitoring management program to easily realize remote power station management
Real-time monitoring data display
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>