Toyz LAMBORGHINI ESSENCE E Ride-On Push Cars User Manual
- June 11, 2024
- TOYZ
Table of Contents
Product complies with: EN71
USER MANUAL
RIDE-ON PUSH CARS
LAMBORGHINI ESSENZA E
LAMBORGHINI ESSENCE E Ride-On Push Cars
IMPORTANT! Please read these instructions carefully before the first use
of the product. This manual should be kept for future use.
Thank you for choosing the Toys by Career ride-on push car. You bought a
modern, high quality product. We are sure it will help your child in safe,
harmonious growth. We encourage you to learn about our full offer on our
website: www.toyz.pl Should you have any remarks about
this product, feel free to share them with us. Toys by Career TEAM.
BATTERY CHANGE
LIST OF PARTS IN THE BOX
| Car body | 1 piece |
|---|---|
| Steering wheel | 1 piece |
| Backrest | 1 piece |
| Safety bar | 1 piece |
| Safety bar fixed part | 1 piece |
| Thumb latch | 2 pieces |
| Push bar | 1 piece |
| Connect tube | 1 piece |
| J-shaped stick | 1 piece |
| Bolt M5X28 | 4 pieces |
| M5 nut | 4 pieces |
WARNING: Before assembling the car, please check if all listed parts are present in the box.
WARNINGS
- This product is intended for children aged 12 months to 36 months.
- Never allow the child to put small elements into his/germ mouth.
- Do not overload the car. The maximal load limit is 25 kg.
- The child should always be supervised by and adult during playing on the car.
- The child should be instructed on how to use the car properly before first use.
- Do not use the car in traffic.
- For the safety of the child, remove all plastic bags from the place the child is playing.
- Never use this car near water reservoirs (rivers, swimming pools etc.) or any other obstacles.
- Never use in darkness and during bad weather.
- Before each use please check if all the elements of the car are properly assembled.
- Pulling the toy behind a car or any other vehicle is forbidden.
- This car is designed for one person. It should never be used by more than one child at a time.
- Do not use the car if any part is damaged or missing.
- Never use spare parts other than those supplied by the distributor of the car.
- Do not allow your child to play near steps and stairwells.
- The assembly of the car must be conducted by an adult person.
- Always make sure that the child holds the steering wheel while riding the car.
- Never leave the child unattended.
SAFETY
Before starting the assembly, please read this manual thoroughly.
Maximum user weight for this car is 25 kg.
Regularly check and tighten all screws and nuts.
This car is not made for use on roads with car traffic.
Never use this car after dark, during rain and snowfall, when the floor is wet
and slippery or on loose,gravel surfaces.
Never allow for the car to be used by more than one child at a time.
WARRANTY LIMITATIONS
The warranty does not cover destruction or losing any parts of this walker due to falls, abrasions, improper assembly, usage without accordance to this manual, careles riding, lack of maintenance, using non-original or additional parts.
CLEANING AND MAINTENANCE
It is required to regularly check and adjust all the car’s elements,
especially the wheels, seat and steering wheel.
Before each use of the car, please check if all the elements are properly
assembled.
In case any part of the car gets worn out, please replace it with a new one.
The car may be cleaned with a damp cloth. Never use strong ammonia-based
detergents, oils, solvents or any other strong chemical substances.
If any part of this vehicle needs replacing, always use original parts
provided by the distributor.
ASSEMBLY INSTRUCTION
Moving on a ride-on is done by pushing off the ground with your feet. Moving
the steering wheel to the left / right allows you to change the direction of
travel.
To assemble the ride-on wheel, turn it upside down with the chassis. Attach
the J-shaped steering rod as shown in the picture (1). Then unscrew the screw
if it is in the steering wheel (2). Attach the handlebar and the fixed part of
the safety bar to the handlebar hole (3). Tighten the steering wheel with the
bolt and nut, making sure that the steering rod is mounted on the front axle
(4). Install the backrest (5) and then fix the armrests in the appropriate
places using the catches (6,7). Remove the cotter pin from the tube (8), fix
the tube to the rod with 2 bolts and nuts (9) and then fix the whole thing in
the hole on the back of the car body (10) and secure it with the cotter pin
(11). Remember that the split pin should be hooked as shown in the picture.
BATTERY USE INSTRUCTIONS
The ride-on car is equipped with the function of making sounds. To use this
feature, open the battery compartment cover at the bottom of the ride-on,
insert 2 1.5V AA batteries according to the polarity markings inside the
compartment and close the cover (9).
The steering wheel is powered with 2 type ‘AA’ 1,5 V batteries (not included).
WARNING: The batteries must always be replaced by and adult person.
WARNING: Never leave batteries or tools within the baby’s reach.
WARNING: Never leave this product exposed to rain – water and humidity
may damage the electrical circuits.
WARNING: Always remove worn out batteries from this product, to eliminate
possible leaks that may damage the product.
WARNING: Remove the batteries if this product is not used for a longer
period of time.
WARNING: Alkaline batteries are recommended for use with this product.
WARNING: Never use different battery types at the same time, nor use old
and new batteries at the same time.
Learn more about brand Toys by Career.
DISTRIBUTOR:
IKS 2 – Children’s Goods Distribution Centre
9 Ribnick Street, 43-190 Mikoto, Poland
+48 32 226 06 06
e-mail: toyz@toyz.pl,
www.toyz.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>