Aihand CP3B0058US Pressure Washer Surface Cleaner Instruction Manual
- May 15, 2024
- Aihand
Table of Contents
Aihand CP3B0058US Pressure Washer Surface Cleaner Instruction Manual
At a Glance
- Connector — It is where to install the extension wand and connect your pressure washer gun or machine.
- Caster — The caster moves freely and rotates 360 degrees in all directions, making it almost effortless as you’re moving.
- Bristles — The bristles are elaborately designed to keep that water and all that trash from blowing out.
- Pressure Jet Sprayer — There are two high pressure jet sprayers that spin quickly to enhance the cleaning capability.
Warning
- Please observe the safety instruction of your high pressure cleaner.
- The surface cleaner fits most pressure washers. Please ensure compatibility and a proper fit before using this accessory.
- Spray the pressure stream in a safe direction. Do not point it at people, pets, electrical devices, or the unit itself.
- Be aware of the recoil force! Ensure a stable position and firmly hold the high pressure gun with the extension wand or the handle.
- Switch off the high pressure cleaner when you finish cleaning.
- After use or before servicing, always disconnect the surface cleaner from the pressure washer spray wand.
- Please don’t touch the edge of the surface cleaner when it is on.
- This is rated for 4000 psi, that doesn’t mean you have to use it at 4000 psi, Please adjust according to the situation.
Tips for Cleaning
- Outdoor surface should be swept before the surface cleaner is used to avoid damaging the high pressure nozzles.
- The surface cleaner is not suited for scrubbing the floor.
- If striping or swirling occurs, please slow your pace. If striping or swirling continues, the surface cleaner nozzles may be clogged.
- Hitting raised obstacles when using a surface cleaner can damage the device. If you hit an obstacle while operating the pressure washer, stop using it temporarily. Continuing operations may damage the device.
Packing List
-
Pressure Washer Surface Cleaner
-
2 x Extension Wand
-
6 x 1/4″ Replacement Nozzles
-
6 x O-rings
-
Teflon Tape
-
Nozzle Cleaner
NOTE:
When unpacking, please make sure that all accessories shown on the Amazon website are included. If any accessories are missing or damaged, please contact us as soon as possible via our email address, we will try our best to solve your problem.
Usage Method
-
Install the extension wand and connect it to your pressure washer.
-
Clean the filthy horizontal surface.
About Aihand
Aihand is a skilled designer and experienced producer that specializes in pressure washer surface cleaner.
We have a strong R&D team, a stringent international quality control system, high manufacturing capacity, and an in-depth understanding of customer requirements.
We are committed to selling high-quality items to every consumer
Contact
If you need help with assembly/service or have received a missing or defective part, please CONTACT US at the email address below
Warranty
Aihand offer a 12-month warranty, during which time you can contact us with any questions you may have, fill out the warranty card below, and we will reply within 12 hours to offer the best solution.
The extended warranty period: You can contact us and become our member, and we will extend your warranty to 24 months.
Email: [email protected]
