Aihand PW101 Cordless Pressure Washer User Manual
- June 17, 2024
- Aihand
Table of Contents
Aihand PW101 Cordless Pressure Washer User Manual
Thanks for choosing the Aihand Portable Power Washer. Please carefully read the user manual and related warnings before using the product. If you have any questions during usage, please feel free to contact us.
NOTE:
If there is water in the machine, please don’t get upset. The product is not
second-hand. In order to ensure that you receive a product that is in perfect
condition, each of our products undergoes a pumping test before leaving the
factory.
Warranty
Dear Customer:
Thanks for you put trust in Aihand.
Aihand is a skilled designer and experienced producer who specializes in
Portable Power & Outdoor items. This washer is suitable for outdoor car
washing, watering green plants, cleaning walls, floors, etc. It can also be
used for cleaning indoors.
Good Service and one-year general Worry-free Warranty for quality-related
issues is our promise, under our warranty, you can return any product (Non-
human damage) within one month of purchase for a refund or a replacement of
the product (Shipping fee/ Import duties/ Taxes/ Charges are not included).
Please feel free to contact us about the issue. Our support team will get back
to you within 24 hours / 6 days.
Do you want to become Aihand VIP, update your general warranty (1 year) to 2
years’ warranty?
Please message us:
cs@aihandstore.com
Official Website: www.aihandstore.com We
are glad to provide you with sincere service. Best regards,
Aihand Customer Service
Specifications
Working Pressure | Max 652PSI |
---|---|
Flow Rate | 3.6L/min=215L/h |
Battery Capacity | 4000 mAh |
Motor Voltage | 18-21V |
Working Time | 45 min |
Charging Time | 6-7 hrs |
Min. Suction Height | 4m |
Unit Weight | 2.5 Lbs (power washer + battery) |
When unpacking, make sure all the parts shown in Amazon.com are included. If any parts are missing or broken, please contact us via email shown on the cover of this manual as soon as possible. Then take out the product and accessories, install and use according to the operation procedure.
Packing List
-
Pressure Washer
-
Battery
-
High/Low Pressure Spray Nozzle
-
6-in-1Nozzle
-
Water Filter
-
0.9FT Short Hose
-
16.5FT Hose
-
Extension Pole
-
Foam Cannon
-
Storage Bag
-
Charger
Installation
Step 1: Install/Remove the battery.
(After receiving the product, please charge the battery pack first. The red light is the charging state, and the green light is the full state. Charging time is about 6-7 hours. please do not overcharge).
-
Install the battery. As shown in the picture, snap the battery onto the body.
-
Remove the battery. Press the blue button to push out the battery
Step 2: Installation/Disassembly of Nozzles.
-
Attach nozzles directly to the pressure washer without using extension pole and rotate it firmly.
Tips: 6-in-1 nozzle is the same installation operation. -
Disassembly of Nozzle.
Turn the nozzle 180° counterclockwise and force the nozzle out.
Tips: 6-in-1 nozzle is the same disassembly operation. -
Nozzle installation with extension pole and rotate it firmly.
First install the extension pole on the pressure washer, and then turn the nozzle on the extension pole.
Tips: 6-in-1 nozzle is the same installation operation. -
Disassembly of the Nozzle with Extension Pole.
Turn the extension pole counterclockwise, pull the extension lever out of the body with force, and then remove the nozzle from the extension pole.
Tips: There should be a pressing action when removing, then rotate the
nozzle and extension lever simultaneously.
Tips: 6-in-1 nozzle is the same disassembly operation.
Step 3: Inset the inlet hose connector into the body as shown.
(The connector contains a sealing ring to check if it is in good condition.)
Note: If it is not installed in place, the pressure washer will not absorb water.
Step 4: Put the filter net on the other end of the inlet hose into water
source.
The filter must be completely immersed in water. If the filter floats on the
water surface, air will enter the water pipe and the machine cannot be used
normally.
Note: Shaking the filter continuously in the water will remove the air from the water pipe.
Step 5: Install the foam pot: Insert the foam pot into the barrel and
rotate the clamp as shown.
Step 6: After using the product and cleaning, please remove battery pack and other accessories in storage box and place it in cool and dry place.
Note: The installation tutorial video of the pressure washer can be found on the Amazon.com. If you have any questions, please feel free to contact us.
FAQ
Battery FailuresFaulty battery chargerSudden incre- ase in effluent pressure or ab- normal waterThe head of the water gun is blocked by foreign matter Machine no workingBattery pack not installed Machine pres- sure disconti- nuityAir in pump Pressure was- her stop workingBattery is deadInternal waterleakingUsing chemical acid source or assembly cause
FAQ | Cause | Solution |
---|---|---|
Without water suction | Machine is too high above water | Holding the pressure |
washer below 1.5m from the ground
Filter is clogged with foregin matter| Remove the filter andclean
Filter not fully subm- erged in water| Completely submerge the filter in water
Failure of connection of Inlet pipe to mach- ine or rupture of intake pipe|
Check and replace the water hose, or contact Aihand Customer Serv- ice for
replacing
Intake pipe bending| Straighten out inlet hose and reconnect
The pump froze becau- se of the cold weather| Restart after thawing
Nozzle cannot be installed by extension pole| Reverse the installati- on order
of the exten- sion pole and nozzle| First install the extension pole to the
body, rotate it firmly; then install the nozzle to the extension pole, details
can be seen in the installation steps- step 2
Battery Failures| Insufficient batterycharging time| The battery requires close
to 6-7 hours of charging time to be fully charged
Battery runs out| Charge or replace newbattery pack
Replace the charger or contact Aihand Custo- mer Service
Battery pack is broken| Contact Aihand Custom- er Service to replace the
Makita battery
Use a needle to clear the nozzle or replace a new gun head
Reinstallation
Battery runs out| Charge or replace newbattery pack
Battery pack is broken| Contact Aihand Custo- mer Service to replace the
Makita battery
Check that joints andhose are in good
Machine in low voltage mode| Normal
Incorrect or brokennozzle| Check or replace thenozzle
Charge or replace newbattery
Gun head stocked| Clear the nozzle or repl-ace the new gun head
Avoid using chemical water sources
Repair and maintenance
- Before each use, please check whether the pressure washer and parts are damaged. If it is damaged, stop using the machine and contact Aihand Customer Service to replace the parts.
- Do not expose the battery to water or other liquids.
- Intake hose and filter must be cleaned after use. The storage box can help to keep away oxidation.
- After using the pressure washer, it should run for a few seconds to drain the residual water in the machine to avoid oxidation or freezing due to weather, and store it in a dry cool place.
- Waste disposal: For damaged accessories and packaging materials, they must be sorted and recycled, and relevant labels must be made.
- Please don’t put the machine in the trunk of the car to avoid the high temperature causing the car to catch fire. Warning:
Do not use chemical acid or muddy water. Must use clean and unpolluted water.
NOTE:
We do not provide garden hose adapter.Although it is troublesome to add
water to the bucket, in order to prolong the life of the machine, we do not
recommend connecting the faucet directly because:
- The Cordless pressure washer connected to the faucet cannot filter impurities in the water, and it is easy to block
- The machine is connected to the faucet, and the pressure of the tap water will complete the damage to the machine water pump;
- When the machine is connected to the faucet, water may automatically come out of the nozzle, resulting in waste of water resources.
Charging Indicator
Full charging: Green LED on
Charging status: Red LED on
The light on the battery’s power display will not be on while charging.
Safety Instructions
Read the entire important safety information section before set up or use of this product:
- Make sure it is the original machine and accessories (charger an battery).
- When using, please do not direct the water to the crowd or other charged components.
- Keep children away from area where the battery is charged.
- Stop using the product if the battery pack or charger has been dropped, bumped or damp.
- Someone must be present when charging the battery.
- Be sure to use original battery pack (forbidden to use other charging accessories or charging methods without authorization or with the consent of the original manufacturer).
- Do not charge in high temperature or unattended environment.
Warning
Note: Batteries contain lithium. To protect the environment, discarded batteries should be sorted and recycled, and should not be thrown away at will!
Do not throw into water or close to fire sources.
Customer Service: cs@aihandstore.com
Official Website: www.aihandstore.com
Whats App: +86 19128451839
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>