DURATECH DLD11 Link Dongle Installation Guide

: June 6, 2024
: DURATECH

Table of Contents

Technical specifications
Box contents
About the DLD11 LinkDongle™
Installation instructions
Control functions
Safety information
Environment / Disposal of old equipment
Service & warranty
Regulatory compliance
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Manual
DLD11 LinkDongle™

LINK Dongle

Technical specifications

General Specifications	DLD11 LinkDongle™
Input voltage	12V DC
Interface	LoRa 865,75MHz
Ambient air temperature	-10°C to +40°C
Humidity	10% to 90% RH – non condensing
Ingress protection rate	IP54
Size	Height: 107mm

Width: 65mm
Depth: 20mm
Weight| 90g

Box contents

About the DLD11 LinkDongle™

The DLD11 LinkDongle™ is an RF module for connecting and controlling the existing Dura Pro heat pumps wirelessly with the LinkTouch™. The DLD11 LinkDongle™ must be connected to the exisiting electronic circuit of the Dura Pro heat pump.

Installation instructions

Power off the heat pump and disconnect from mains (230 VAC), prior to the installation of the LinkDongle™

Open the top lid
Open the electronics lid
Disconnect the controller-display cable
Connect the DLD11 LinkDongleTM to the disconnected cables using the split cable, according to the scheme as shown in the picture
Slide the DLD11 LinkDongleTM on the edge of the plastic front, with the cable tie and the edge clip
Placement of the DLD11 LinkDongleTM must be outside the metal housing
Close the electronics lid
Close the top lid
Reconnect the heat pump to mains (230VAC) and power on after installing the DLD11 LinkDongle™

Control functions

See LinkTouch™ for further information on how to pair with the heat pump after installing the DLD11 LinkDongle TM.

Safety information

Intended use
This device has been developed as an RF connecting device for Dura Pro heat pumps and must be operated with the LinkTouch™.

Precautions for setup

The DLD11 LinkDongle™ should only be installed and connected as described in this manual.
Protect the cables from being strained, pinched or bucked.
Use only the original cables from the heat pump and DLD11 LinkDongle™ to do the installation.
Do not use the cables if damaged or frayed. In case of damage, contact an authorised technician for repair.
The DLD11 LinkDongle™ contains no serviceable parts. Do not attempt to service the DLD11 LinkDongle™ yourself. Repair service should be performed by a authorised technician.

Environment / Disposal of old equipment

This symbol of a crossed out waste bin on a product, its packaging and/or accompanying documents means that the product is subject to the European Directive 2002/96/EC as well as national law for implementation of the directive. Directive and law prescribe that electrical and electronic products must not be disposed of with household waste. The customer must dispose of the product by delivering it to a designated station for collection, treatment and recycling of waste electrical and electronic equipment. The correct disposal of your old appliance is free of charge and will help prevent potential negative consequences of the environment and human health. For more information about disposing your old appliance, contact your city office, waste disposal service, or the shop where you purchased the product.

Service & warranty

If you need service or information or if you have a problem, please contact your local dealer. If needed they will contact the manufacturer to solve your problem.
They are gladly willing to assist you!
You can find more information at www.duratech.be

We warrant all parts to be free from manufacturing defects in materials and workmanship for a period of two years from the date of retail purchase. This warranty is limited to the first retail purchaser and is not transferable. The liability of the manufacturer shall not exceed the repair or replacement of defective parts and does not include any costs for labour to remove and reinstall the defective part, transportation to or from the factory, and any other materials required to make the repair. This warranty does not cover failures or malfunctions resulting from the following:

Failure to properly install, operate or maintain the LinkDongleTM in accordance with the installation guidelines provided in this manual.
The workmanship of any installer of the product.
Abuse, alteration, accident, fire, flood, lighting, rodents, insects, negligence or acts of god.
Use of non-factory authorized parts or accessories in conjunction with the product.

LIMITATION OF LIABILITY
This is the only warranty given by the manufacturer, No one is authorized to make any other warranties on our behalf.This warranty is in lieu of all other warranties, expressed or imlied, including but not limited to any implied warranty of fitness for a particular purpose and merchantability. We expressly disclaim and exclude any liability for consequential, incidental, indirect or punitive damages for breach of any expressed or implied warranty. This warranty gives you specific legal rights, which may vary, by country.

WARRANTY CLAIMS
For prompt warranty consideration, contact your dealer and provide the following information: proof of purchase, model number, serial number and date of installation. The dealer will contact the manufacturer for instructions regarding the claim and determine the location of the nearest service point.