heidolph Unlimited Combinations Shakers and Mixers User Guide

: June 17, 2024
: heidolph

Table of Contents

heidolph Unlimited Combinations Shakers and Mixers
Typographic conventions
Copyright protection
Safety information
Occupational safety
Other regulations
Device-specific safety instructions
Automatic restart
Operation
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

heidolph Unlimited Combinations Shakers and Mixers

heidolph-Unlimited-Combinations-Shakers-and-Mixers-
product

Product Specifications

Brand: Heidolph Instruments
Product Type: Shakers and Mixers
Language: English, German
Document Contents: Safety Guide, Index, Introduction

Product Usage Instructions

Safety Guide
This document provides a summary of safety instructions for Heidolph Instruments’ shakers and mixers in multiple languages. Always refer to the original operating instructions for detailed information.

Typographic Conventions
Standardized symbols and signal words are used to warn of hazards and highlight important information. Follow these conventions to ensure safe product usage.

Copyright Protection
This document is protected by copyright and is for use by the purchaser only. Do not reproduce or disclose the contents without written consent from Heidolph Instruments GmbH & Co. KG.

About this document

This document contains a summary of all safety instructions for Heidolph Instruments’ shakers and mixers in the official languages of the European Union.
This document in no way replaces the operating instructions supplied with the product!
For more detailed information, please refer to the original instructions (in German) or the translation of the original instructions supplied with the product.

Typographic conventions

Standardized symbols, signal words and highlighting elements are used in this document to warn of hazards and to identify important information or rather special text contents.

Symbol

heidolph-Unlimited-Combinations-Shakers-and-Mixers-

Copyright protection

This document is protected by copyright and is intended for use by the purchaser of the product only.
No transfer to third parties, reproduction in any form, including excerpts, and by any means, as well as utilization and/or disclosure of the contents is permitted without the prior written consent of Heidolph Instruments GmbH & Co. KG. Any violation is subject to compensation for damage.

Intended use
Shakers and mixers of the company Heidolph Instruments have been specially developed for the following tasks:

Shaking
Mixing
Emulsifying
Suspending
Separating
Dissolving
Staining

Detailed information can be seen in the associated operating instructions. The areas of application of Heidolph Instruments’ shakers and mixers include especially chemical, biological and environmental-analytical laboratory and research applications, applications of basic research and comparable facilities.
Due to their design, the shakers and mixers of Heidolph Instruments in their delivery condition may only be used in analytical processes or in laboratory- like conditions in the food, cosmetics, and pharmaceutical industries as well as other comparable industries that manufacture products intended for consumption by humans or animals, or for use on humans or animals.
Any other use is deemed to be not as intended!

Safety information

General safety instructions

Before commissioning and using the device, familiarize yourself with all the safety regulations and occupational safety guidelines applicable at the place of use and observe them at all times.
Only operate the device if it is in faultless technical condition. In particular, ensure that there is no visible damage on the device itself, the power supply cord and, where applicable, on connected devices or the supply connections.
If there is missing or misleading information on the device or regarding occupational safety, contact the responsible safety specialist or our technical service.
Only use the device in accordance with the regulations for intended use.

Electrical safety

Before connecting the device to the power supply, ensure that the voltage indicated on the rating plate matches the specifications of the local power utility company.
Ensure that the power supply circuit provided is protected by means of a residual-current device (RCD).
Always use the power supply cord provided with the device.
The device must only be supplied with power from a properly grounded mains socket outlet.
Have repairs and/or maintenance work on the device carried out exclusively by an authorized electrician or by the technical service department of Heidolph Instruments.
Always disconnect the device from the power supply system before carrying out any maintenance, cleaning or repair work.

Data security

The user is responsible for ensuring data security when transferring data between a shaker or mixer of the company Heidolph Instruments and other devices/systems.
Only use secure networks for the data transfer and avoid use of critical infrastructure.
Only use high-quality shielded data cables for the data transfer.
For data transfer via a USB B connection, an industrial standard USB hub should be preferably used to ensure the most stable connection possible.

Operational safety

Operate the device under a closed ventilated fume hood when working with potentially hazardous substances (see EN 14175 and DIN 12924).
Do not make any unauthorized changes or modifications to the device!
Only use genuine spare parts and accessories, or those expressly approved by the manufacturer!
Rectify malfunctions or faults on the device immediately.
Switch off and disconnect the device from the power supply, preventing reconnection, if it is not possible to eliminate the malfunction or rectify the fault immediately.
Observe all other applicable regulations such as laboratory and workplace guidelines, recognized safety technology rules and special local regulations.

Occupational safety

Always use the prescribed personal protective equipment (PPE) such as protective clothing, safety goggles, protective gloves, safety shoes, etc.
Persons with pacemakers or other susceptible implants must maintain a minimum distance of ten cm from the device to prevent possible interference.
Do not operate any other devices in the immediate vicinity of the device
- which generate emission or radiation sources in the frequency range 3 × 1011 Hz to 3 × 1015 Hz (in the optical spectral range wavelengths from 1,000 μm to 0,1 μm),
- which generate ultrasonic or ionizing waves.
Do not process any substances that could release energy in an uncontrolled manner (e.g. self-ignition).
Do not process substances in which the energy input through mixing poses a danger.
Do not work with an open flame in the immediate vicinity of the device (risk of explosion or fire when processing explosive/flammable media).
Wipe off any liquid that may have spilled on the device immediately.
Always switch off the device or disconnect the device from the power supply when it is not in use.

Personal protective equipment (PPE)

The operating company must determine and provide the necessary PPE, depending on the respective application and the media and chemicals used.
The corresponding instruction of the personnel is solely within the operating company’s responsibility.

Environmental protection

When processing environmentally hazardous substances, take appropriate measures to avoid hazards to the environment.
The evaluation of corresponding measures such as the marking of a hazardous area, their implementation, and the training of the relevant personnel is the sole responsibility of the operator!

Biohazard
When processing biohazardous substances, take appropriate measures to prevent hazards to persons and the environment, including:

Instruction of the personnel regarding the necessary safety measures.
Provision of personal protective equipment (PPE) and instruction of the personnel in its use.
Marking the device with a biohazard warning symbol.

The evaluation of corresponding measures such as the marking of a hazardous area, their implementation, and the training of the relevant personnel is the sole responsibility of the operator!

Other regulations

In addition to the notes and instructions in this document, observe all other applicable regulations such as laboratory and workplace guidelines, hazardous substances ordinances, recognized rules of safety engineering and occupational medicine as well as particular local regulations!

Noncompliance will invalidate any warranty claims against Heidolph Instruments.
The operator is solely liable for all damage resulting from unauthorized changes or modifications to the device, from the use of unauthorized or non- genuine spare parts and accessories, or from disregarding the safety instructions and hazard warnings or the manufacturer’s instructions!

Device-specific safety instructions

Mounting

CAUTION

To use the device, place it on a clean, stable, level, horizontal, and heat-resistant surface. Make sure that the power plug can be reached directly at any time, in order to disconnect the device
from the power supply at any time without delay.
Before switching on, make sure that the device is sufficiently stable.
Before switching on, always make sure that all setups are centered as far as possible and are fixed on the base unit with sufficient stability.
Keep all support and contact surfaces clean and dry.

Power supply

DANGER
The device may only be supplied with the required mains voltage via a grounded mains socket-outlet (voltage see rating plate).
Only use the supplied power supply cord.

Automatic restart

WARNING

Before activating the function [Automatic restart], take appropriate measures to make sure that, in case of a possible unmonitored restart, no hazard for persons or risk of damage to property can occur.
In the as-delivered condition, the [Automatic restart] function is deactivated and has to be activated or deactivated manually.
The evaluation of potential risks by a possible unmonitored automatic restart as well as of appropriate security measures is the sole responsibility of the user!

Operation

WARNING

Whenever possible, use closed vessels for processing corrosive, toxic or biohazardous substances and seal them safely.
Increase the speed only gradually to the desired shaking frequency, especially with open vessels, and observe the fluid movements.
Please note the maximum lifting capacity of the platform of your device.
Lower the shaking frequency or reduce the total load on the platform when the device starts to vibrate during operation.
Always ensure that the vessels are evenly distributed on the platform.
Pay particular attention to an even distribution of the weight load when vessels of different sizes and/or differently filled vessels are placed on the platform at the same time!
Before switching on the device, make sure that all vessels are properly fixed on the platform.
Use suitable attachments for the used vessels. Further information on available accessories can be found on our website at www.heidolph.com!
Always use the necessary and appropriate personal protective equipment!
Secure the device in remote mode with a clearly visible warning sign and, if necessary, take further ambient-specific protective measures that protect against damage to property and injuries in the event of unexpected/unmonitored starting of the device.

Device service

DANGER

Switch the device’s main switch off and disconnect it from the power supply before carrying out maintenance work, cleaning, or repairs.
When cleaning, avoid the penetration of liquids.
Before replacing the fuses, switch off the device and disconnect the power supply cord. Always replace the two device fuses in pairs with original manufacturer fuses. Further information on available accessories can be found on our website at www.heidolph.com!
After fuse replacement, check the device for a safe condition according to IEC 61010-1.

CAUTION
Clean the device’s surfaces with a soft, lint-free and only slightly moistened cloth. Never use any aggressive or abrasive cleaning agents or aids.

Repairs

Repairs to the device may only be carried out by authorized experts!
Unauthorized repairs during the warranty period will result in the loss of the warranty claim.
The owner is solely liable for damage caused by unauthorized repairs.
If repairs are necessary, contact an authorized dealer or our technical service.

Maintenance

The device contains no user-serviceable components. If necessary (in the event of abnormal operating behavior such as excessive noise or heat generation, for example) contact our technical service.

Dismantling
Observe the instructions contained in the assembly instructions supplied when dismantling.

Other regulations
In addition to the notes and instructions in this document, observe all other applicable regulations such as laboratory and workplace guidelines, hazardous substances ordinances, recognized rules of safety engineering and occupational medicine as well as particular local regulations!

Contact details Heidolph Instruments GmbH & Co. KG

Heidolph Instruments GmbH & Co. KG