Style SELECTIONS FSI 1436E MBLK Sema Brushed Gold Steel Single Curtain Rod with Finials Instruction Manual

Style SELECTIONS FSI 1436E MBLK Sema Brushed Gold Steel Single Curtain

Rod with Finials

Product Information

The Drapery Rod is a versatile and stylish accessory for hanging curtains or drapes in your home. It is available in various models and colors to suit your individual style and decor. The product is  manufactured by LF, LLC, a trusted brand in home furnishings.

The package includes the following:

• 1 Drapery Rod
• 2 or 3 Mounting Brackets (depending on the model)
• 2 or 4 Wall Anchors
• 2 or 6 Screws
• Finials (to be positioned as desired)

Please note that the actual product appearance may vary from the image shown.

Product Usage Instructions

1. Remove the bracket from the wall where you want to install the drapery rod.
2. Using a 3/16 inch drill bit (not included), drill a pilot hole and insert the wall anchors.
3. Attach the bracket to the wall using the screws provided.
4. Fit your desired drapes (not included) onto the rod.
5. For 28-48 inch drapery rods:
6. Place the rod, with the drapes, onto the mounting brackets.
7. Position the finials as desired.
8. Tighten the screws on each bracket to secure the rod in place.
9. For 48-84 inch drapery rods:
10. Place the rod, with the drapes, onto the mounting brackets.
11. Position the finials as desired.
12. Tighten the screws on each bracket to secure the rod in place.

If you require additional brackets, repeat steps 1 to 3 for each bracket. You may use a level (not included) to ensure the drapery rod is level if necessary.

Proper care and maintenance of the drapery rod will help prolong its lifespan. Refer to the care and maintenance instructions provided in the user manual for more details.

STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved

MODEL/MODELO #FSI 1436E WHTE/ FSI 1436E MBLK/ FSI 1436E DORB/ FSI 1436E BNIC/ FSI 1436F WHTE/ FSI 1474X BGLD/ FSI 1474X MBLK/ FSI 1474X BNIC/ FSI 1474X DORB/ FSI 1474Y BGLD/ FSI 1474Y BNIC/ FSI 1474Y MBLK/ FSI 1474Y DORB/ FSI 1436F MBLK/ FSI 1436F DORB/ FSI 1436F BNIC

Thank you for purchasing this Style Selections product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product in-stead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 877-888-8225, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.

Image is for example only. Appearance of actual product may vary

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 30 minutes

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

Visit lowes.com for more information.,visite Lowes.com.

TROUBLESHOOTING

Drapery rod not level.

| Drapery hooks not installed correctly.

.

| Make sure to use level (not included) during installation.

Drapery rod hook is loose.

.

|

Drapery hooks not anchored correctly.

|

Attach drapery hooks to wall studs if possible. Use anchors and screws supplied if you can’t attach to stud.

CARE AND MAINTENANCE

• Clean with a soft cloth.
• Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.

PACKAGE CONTENTS

HARDWARE CONTENTS

INSTALLATION OVERVIEW

1. Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.

2. Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.

NOTE
Anchors are not needed for all installation types.

3. Attach bracket to wall using screws provided

NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary

4. Fit drape(s) (not included) on rod.

5. Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure

6. Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>