RRBOX Remember Ringbox User Manual

RRBOX Remember Ringbox

User manual

This camera comes with 2MP CMOS sensor, which can record high-definition video in H.264 format. Also you can check the videos and images on your mobile phone app For an easier operation, please read the manual carefully before using it, and keep it in a safe place for future reference. The contents covered in this manual is based on the latest information at the time of writing the manual. Due to the differences of technical development and production batches, it may be slightly different from your actual use. Please take the actual product features prevail.

Operation Guide

This camera contains a built-in memory, no need to purchase any extra memory card. Please fully charge the camera before using, you can also use an AC Adapter (not included) to charge the camera, you can find the Type-C port in the side of the camera.

Power On/Off

• Power On the camera
• Press and hold the POWER button around 2 seconds to turn on the camera.
• Power Off the camera
• Press and hold the POWER button around 5 seconds to turn on the camera.
• Record a video
• Press and hold the RECORD button around 2 seconds to start recording. The indicator flashes red during recording.
• Take a photo
• Short press the RECORD button once to take a photo. The indicator flashes once of a single photo.
• The indicator flashes red during the recording.
• Playback
• You can only be allowed to playback the videos or photos on mobile phone via app.

Button、 Interface、 LED Indicator、 Function

Diagram

1.  Lens：
   For Video recording and Photo Capture: Please make sure the lens is clean and without dirty.

2. Type-C Port：
   Charging the camera

3.  Power Button
   Turn on/off the camera

4.  Record Button

   • Press and hold around 2 seconds to record a video
   • Short press once to take a single photo.

5.  Power Indicato
   The indicator flashes orange during charging

6. Working Indicator

   • The indicator flashes once when take a single photo.
   •  The indicator flashes continuously during recording.

Button & Indicator

solid

continuously

On battery <30%| No Type C port connected| Orange          glow solid

continuously

On+Record+WiFi

connecting

| Press and hold power button for 3sec., the camera turns

on and starts recording immediately

| Green solid + blue pulse +

Red flash blink

No Wifi connected| >30 sec +recording+ no Wifi| Green solid+Red flash blink
Wifi connected| <30 sec + recording+Wifi connected| Blue solid+Green solid + Red

flash blink

Offer Wifi signal again| Press RECORD button 3 sec in Standby mode| Blue pulse again
Auto OFF| >5 min Standby| OFF
OFF| Press ON/OFF 5 sec| OFF

On Mode

If there is no any operation of the Ringbox it will go to sleep mode in 5 mins. All LEDs are off. In NO circumstance will the ringbox turn off by the timer during recording.

Error/Warning Mode

The ringbox goes to error mode in the following situations :

•  Electrical protection initiated
•  Thermal protection initiated
•  Over charge or discharge of the internal battery
•  Over current or over power
•  Any other fault if needed
  Error mode is reset by automatically detecting if the error condition is removed.

Setting Operation on App

Image Rotate ：the image will turn up-down 180°if this option is activated
Time Stamp : The video or picture will show time and date information if activated.
Loop Recording ：If activated, the camera will generate a new video clip after the selected option, such as 2min, 3min, 5min.
Format the SD card ：It will erase all the data on the Micro SD card if activated this option.
Factory Default ：All the settings will return back to factory default setting when confirm this option.
APP Version ：To check the current APP version number.

The operation interface of the app:

Download link ：https://www.pgyer.com/Sports-NewVer Product Name：Ring Box ****

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is

Connected
consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used inportable exposure condition without restriction.

References

• Sports NewVer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>