OUKITEL P1201E Portable Power Station Outdoor Generator User Manual

OUKITEL P1201E Portable Power Station Outdoor Generator

Disclaimer

• Before use, please read the user manual of this product to ensure correct use after a complete understanding. After reading, please keep the user manual in a safe place for future reference. If you do not use this product correctly, it may cause serious injury to your­self or others, also product damage and property loss.
• Once you use this product, it is deemed that you have understood, approved and accepted all the terms of this manual. The user prom­ises to be responsible for his actions and all consequences arising therefrom.
• Our company is not responsible for all losses caused by users not using the product in accordance with the “User Guide”. In compli­ance with laws and regulations, our company has the final right to interpret this document and all related documents of this product.

Packing list

Attention
Please read the manual very carefully before you use the product!

• Pay special attention when using the product near children.
• Using accessories recommended or sold by non-professional product manufacturers may have the risk of electric shock.
• When not using the product, please turn off the power.
• DO NOT disassemble the product, it may cause unpredictable fire, electric shock, etc.
• DO NOT use a broken plug or wire with this product, it may cause unpredictable risks.
• When using the product, please ensure that the air intake/outlet is unblocked.
• Please place the product in a ventilated and dry environment, avoid rain, humidity and other wet environments.
• DO NOT use this product in a high temperature environment.
• Please charge the product every three months.

Specifications

Product introduction

• This product is a portable power station, suitable for home emer­gency power backup, outdoor travel, emergency disaster, field work and other applications.
• The product has a built-in lithium iron phosphate battery, which­supports AC fast charging, car charging, solar photovoltaic panel­charging(the product has UPS function, when the power fails, it can switch to supply power to the electrical appliance within lOms).

1. Main power control
2. Light control
3. USB control
4. DC control
5. LCD display
6. Air intake/outlet
7. AC on/off control
8. XT60 input port(for solar panel)
9. AC input port
10. Overload protection

Main Power Control
Main Control for the whole system turn on/off. Operate method: long press the button for 3s to turn on/off the system.

Light control
Operate method:short press to turn on and change the light mode(SOS/Flash).
Notice: you can turn off the light by long press the button(l-2s) in any mode.

USB control
Operate method:short press to turn on/off.

DC control
Operate method:short press to turn on/off.

LCD display
Present the remaining power and using data.

Air intake/outlet
When the fans are working, please don’t block the channel.

*AC control(AC output2, total share 1200W)
Operate method:short press to turn on/off.
Notice:**

1. Please confirm the output voltage or frequency before using.
2. Quick short press for 10 times to switch the voltage.

XT60 input port
XT60 port for charging by car charging or solar panel charging.

AC input port
About two to get a full charge by 700W main AC from the power grid.

Overload protector

• To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lightning and power grid fluctuations. When such a situation occurs, the overload protector will start to cut off the AC input to protect the product.
• Please restart the AC input function of this product by following. steps:
• *When the overload protector is activated, it’s unable to charge the devices.
  1. For safety reasons, turn the product OFF and unplug all ports.
  2. After confirming that there is no abnormality in each part, turn on the product.
  3. Press the overload protection button to restart AC input.

Display icon introduction

1. Charging/using time
2. Fan state
3. High/low temperature protection
4. Power percentage
5. Total input power
6. Total output power
7. LED light
8. AC output
9. Type-c output
10. USBoutput
11. AC charging
12. XT60 charging
13. DC output
14. Cigar lighter output

ICCON STATUS

Recharge method

By AC mains

By solar panels

• Please make sure the input voltage between 12-48V. When the voltage over 48V, the over-voltage protection will work and stop charging.
• Free after-sales service will not be guaranteed, if you use the wrong solar panels or in a wrong way.

Connecting Pattern 1
The area of charging

Connecting Pattern 2
The area of charging

By Car charger

UPS introduction

The user can connect the AC charging cable to the power grid, and then connect the electrical appliances to the AC outlet of the device and turn the AC output on (as shown in the figure below).

Attention

1. The UPS ONLY support appliances under 1200W.
2. Before power cut, the power supply will directly come from the power grid.
3. When power cut, the device will switch the power supply from­power grid to the battery inside automatic in l0ms,and keep your appliances working.

FAQ

• The appliances power is within the rated output power range of the product but it cannot be used?
  The power of the product is low and needs to be recharged.When some electrical appliances are started, the peak power is higher than the product power, or the nominal power of the electrical appliance is greater than the product power.

• Why is there a sound when using it?
  The sound comes from the fan or the SCM when you start or using the product.

• Is it normal the charging cable heat up during use?
  Yes, it is. The cable complies with national safety standards and has applied the certificates.

• What kind of battery we use in this product?
  The battery type is lithium iron phosphate.

• What devices the product can support by the AC output?
  The AC output is rated 1200W. It’s available to powermost of the home appliances, which rated power is lower than 1200W. Please make sure the total loading by AC is under 1200W before using.

• How can we know the remain using time?
  Please check the data on the screen, it will show the remain using time when you turn on.

• How can we confirm the product is recharging?
  When the product is under charging, the product screen will show the input wattage, and the power percentage indicator will blink.

• How should we clean the product?
  Please use a dry, soft, clean cloth or tissue to wipe the product.

• How to storage?
  Please turn off the product and place it in a dry environment. Do not place this product near water.For long-term storage, we recommend to use the product every three months(Run out the remain power first and recharge it to the percentage you want, such as 50%).

• Can we take this product on airplane?
  NO, you can’t.

• Is the actual output capacity of the product the same as the target capacity in the user manual?
  The capacity of the user manual is the rated capacity of the battery pack of this product. Because this product has a certain efficiency loss during the charging and discharging process, the actual output capacity of the product is lower than the capacity specified in the user manual.

Maintenance

1. It is recommended to use or store this product in an environment of 20°c to 30°C, away from water, heat, and other metal objects.
2. For safety reasons, please do not store this product in an environ­ment higher than 45°C or lower than -l0°C for a long time.
3. If it is not used for a long time, please charge it to 60% before stor­ing. If the battery is left unused for a long time when the battery is seriously insufficient, it will cause irreversible damage to the battery and shorten the cycle life of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>