COLAMY A361 Tall Bar Height Stools Instruction Manual
- June 17, 2024
- COLAMY
Table of Contents
COLAMY A361 Tall Bar Height Stools
Specifications
- Model No.: A361
- Weight Capacity for Seating: 250lbs
Product Information:
The A361 chair is a sturdy dining chair designed for comfortable seating. It has a weight capacity of 250lbs and comes with assembly parts and tools included for easy setup. The chair features a backrest for support and a seat cushion for added comfort.
Product Usage Instructions:
Assembly Instructions:
-
Step 1:
Remove the Velcro under the seat and attach the front leg to the seat using the provided bolts, washers, and wrench. Tighten the bolts to 50% of their maximum tightness. -
Step 2:
Attach the rung to the front leg using the provided screws. Tighten the screws to 50%. -
Step 3:
Attach the seat and rung to the back by using the specified bolts and washers. Tighten the bolts to 50%. -
Step 4:
Fix the rung to the back using the provided screws. Tighten the screws to 50%. -
Step 5:
Adjust the balance of the chair using your body weight, then tighten all screws to 100%. Close the Velcro and use Adjusting Pin Nail if necessary.
Product Usage Tips:
- Partly screw in bolts during assembly before fully tightening them.
- Apply pressure to the seat (about 44lbs/20kg) to ensure stability.
- Tighten bolts in a specific order for proper assembly.
- If legs are uneven, adjust foot pegs at the bottom for balance.
FAQ
Q: What is the warranty for the A361 chair?
A: COLAMY offers a limited warranty that covers repair or replacement
of any defective A361 chair within one year from the original purchase date,
provided you are the original purchaser. This warranty is subject to specific
provisions.
WARNING
Please read the instructions carefully and follow the assembly steps.
- To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
- To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
- Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
- Using the wrong size of screws for a particular part could cause damage to the screw or the part.
- Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.
SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 250LBS
ASSEMBLY PARTS AND TOOL
BEFORE YOU GET STARTED, A FEW POINTERS:
Please open the Seat Cushion bottom and take out all accessories before
installation.
Please use the included wrench instead of an ELECTRIC HAND DRILL in case of
damage to the chair leg.
PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED.
MISSING PARTS? support@colamyhome.com
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove the Velcro under the seat, and use a wrench (5) to fix the front leg (C) to the seat (B) with a flat washer (4), spring washer (3) and bolt M8*60mm (1). Please tighten the bolts to 50% of their maximum tightness.
-
Step 2
Attach the Rung(D) to the Front Leg(C) by using Screw M4*45mm(6) and Screw Driver (Not Included), please tighten the screws to 50%.
-
Step 3
Attach the Seat(B) and Rung(D) to the Back(A) by using Flat Washer(4), Spring Washer(3), Bolt M860mm(1) for central hole, Bolt M880mm(2) for 4 corner holes and Wrench(5), please tighten the bolts to 50%.
-
Step 4
Fix the Rung(D) to the Back(A) by using Screw M4*45mm(6) and Screw Driver (Not Included), please tighten the screws 50%.
-
Step 5
Use body weight to adjust balance of chair, then tighten all the screws 100% all the way, then close the velcro. Remember to use Adjusting Pin Nail to adjust the level of chair if necessary.
ATTENTION
Please read the following instructions to help you assemble the dining
chair faster.
- Step 1
- Partly screw in bolts, but do not fully tighten.
- Step 2
- Put pressure on the seat.(About 44lbs/20kg)
- Place the chair on a flat surface and apply pressure to the seat. Firstly tighten the middle bolt on the back, then both bolts on the sides, and finally the front legs. Make sure all bolts are fully tightened before using the chair.
- Step 3
- lf the legs are uneven, you can also adjust the foot pegs at the bottom of the legs to improve balance.
LIMITED WARRANTY
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you, the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
EXCLUSIONS
This warranty does not apply and no other warranty applies to:
- Normal wear and tear, which are to be expected over the course of ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by COLAMY. Products that were not installed, used, or maintained in accordance with product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.
RETURN POLICY
We adopt a 30-day return policy which means that all products purchased on
this website may be returned to us within the timeframe. You need to contact
us within 30 days after the product(s) came into your possession and the
product(s) must be returned to us without any undue delays.
Returned products must be returned in the same condition as they were sent and
they must be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are
unhappy with the product for some other reason), the cost of shipping will
fall on you. And it is your responsibility that the package arrives safely to
us so we recommend that you use a courier service where it is possible to
track the shipment.
LIMITED WARRANTY
If the product is faulty when you receive it, please contact us and we will
help you out.
We reserve the right to give a partial refund in cases when the product(s) is
not in an unused condition, is damaged or has missing parts, not due to our
error.
HOW RETURNS WORK
-
To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.
-
Then we will provide the return address for the product as soon as possible.
-
Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you.
-
In addition, if the return is approved, the refund amount will be automatically credited to your original payment method.
-
TEL +1(626)-341-3028
-
WEB colamyhome.com
-
E-MAIL support@colamyhome.com
CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.