StarTech com ST3300GU3B 3 Port Portable USB Hub with Gigabit Ethernet User Guide
- June 17, 2024
- StarTech com
Table of Contents
Quick-Start Guide
3-Port Portable USB Hub with Gigabit Ethernet
ST3300GU3B / HB30C3A1GE
ST3300GU3B 3 Port Portable USB Hub with Gigabit Ethernet
| Component| Function
---|---|---
1| Built-in USB Host Cable
USB-A (ST3300GU3B)
USB-C (HB30C3A1GE)| • Connect to a USB-A or USB-C Port on a Host Laptop
• USB 3.2 Gen 1 (5Gbps)
2| 3x USB-A Data Ports| • Connect and Charge USB-A Peripherals
• USB 3.2 Gen 1 (5Gbps)
• Supports 5V/0.9A (4.5W) of Power
3| Gigabit Ethernet Port| • Connect an Ethernet Cable to Establish a Network
Connection
• 10/100/1000 Mbps
4| DC 5V Power Input| • Connect the USB Hub to a Power Source using the
Included Power Adapter
5| Network LED Indicators| • Indicates Link Speed and Activity
• Link Activity LED Indicator (Green)
• Off = No Network Activity
• Flashing Green = Network Activity
• Link Detection LED Indicator (Amber)
• Off = No Network Detected
• Solid Amber = Network Detected
Package Contents
-
USB Hub x 1
-
Power Adapter x1
-
Quick-Start Guide x 1
Requirements -
Host Computer
-
USB Port
For the latest drivers, manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/ST3300GU3B
www.StarTech.com/HB30C3A1GE
Software Installation
Windows
-
Connect the Built-in USB Host Cable on the USB Hub to a USB Port on the Host Computer. The USB Hub should automatically install using native drivers.
If the drivers do not automatically install, navigate to: www.StarTech.com/ST3300GU3B, or www.StarTech.com/HB30C3A1GE and click the Drivers/Downloads tab. -
Under Driver(s), download the Windows driver package, and extract the files contained within the zip folder that was downloaded.
-
Right-click the Installer Setup File and select Run as Administrator, then follow the on-screen instructions to complete the installation. The Host Computer may require restart during the installation process. Please save any unsaved work, before proceeding.
Note: If the Run as administrator option is not available, you could be attempting to run the Installer Setup from within the zipped Driver Package. Extract the files using the instructions in Step 2 in the Install the Driver section. macOS
-
Connect the Built-in USB Host Cable on the USB Hub to a USB Port on the Host
Computer. The USB Hub should automatically install using native drivers.
If the drivers do not automatically install, navigate to: www.StarTech.com/ST3300GU3B, or www.StarTech.com/HB30C3A1GE and click the Drivers/Downloads tab. -
Under Driver(s), download macOS software package, and extract the files contained within the zip folder that was downloaded.
-
Open the folder corresponding to the macOS version installed on the Host Computer.
-
Run the Installer File, and follow the on-screen instructions to complete the installation. The Host Computer may require restart during the installation process. Please save any unsaved work, before proceeding.
Linux
- Connect the Built-in USB Host Cable on the USB Hub to a USB Port on the Host Computer. The USB Hub should automatically install using native drivers. If the drivers do not automatically install, navigate to: www.StarTech.com/ST3300GU3B, or www.StarTech.com/HB30C3A1GE and click the Drivers/Downloads tab.
- Under Driver(s), download the Linux software package, and extract the files contained within the zip folder that was downloaded.
- Follow the instructions in the accompanying Readme file to finish the installation.
Hardware Installation
- Connect the Built-in USB Host Cable on the USB Hub to a USB Port on the Host Computer.
- Connect USB Peripherals to the USB-A Data Ports on the USB Hub, using the required cabling (sold separately).
- Connect an RJ-45 terminated network cable (CAT 5e or better) from your local area network (e.g. Router, Switch, Modem, etc.) to the Gigabit Ethernet Port, located on the USB Hub, to access a network via a wired LAN connection.
Regulatory Compliance
FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by
StarTech.com could void the user’s authority to operate
the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
References
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
- Hub USB C 3 Port GbE C to A, Power Adapt - USB-C Hubs | USB Hubs | StarTech.com
- Portable USB 3.0 Hub w/ Gigabit Ethernet - USB-A Hubs | USB Hubs | StarTech.com
- You | Fabricant de cuisines aménagées & salles de bains sur-mesure
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>