BOGEN PCM2000 Rack Mounting Kit RPK84 Installation Guide
- June 6, 2024
- BOGEN
Table of Contents
Model: RPK84
PCM2000
Rack Mounting Kit
Rack Mounting A Typical 4-Module Assembly
Installation
1. Position the left side of the completed PCM assembly over one of the rack mounting adapters. Refer to the figure above and the table below to determine the correct holes for the number of modules in the assembly.
| Total Modules | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|
| Mounting Holes | C & D | B & D | B & E | B & F | **A |
& F**
2. Secure the left side of the PCM system to the rack adapter using two of
the truss head sheet metal screws included with the kit.
3. Secure the right side of the PCM system to the other rack adapter using
the holes for the number of modules in the assembly and the remaining two
truss head sheet metal screws.
4. Secure the assembly to a 19″ rack (rack screws not supplied).
Specifications subject to change without notice.
© 2000 Bogen Communications, Inc.
54-2032-01D 1304
www.bogen.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>