LINDY BNX-60 Wireless Active Noise Cancelling Headphones Instruction Manual
- June 17, 2024
- LINDY
Table of Contents
LINDY BNX-60 Wireless Active Noise Cancelling Headphones
Product Information
Specifications
- Product Name : LINDY Bluetooth Headphones BNX-60
- Color: Grey, Black
- Model Numbers : 73134, 73136
- Manufacturer: LINDY Electronics LTD
Product Usage Instructions
Charging the Headphones
To charge the headphones, use the provided charging cable and connect it to a power source. The LED indicator will show the charging status.
Pairing with Bluetooth Device
Turn on the headphones and put them in pairing mode. On your Bluetooth device, search for available devices and select “LINDY Bluetooth Headphones BNX-60” to pair.
Adjusting Volume and Controls
Use the buttons on the headphones to adjust volume, skip tracks, answer calls, or activate voice assistant based on the specific controls provided.
Wearing the Headphones
Adjust the headband and ear cups for a comfortable fit. Make sure the ear cushions cover your ears completely for optimal sound quality.
FAQ
- Q: How do I reset the headphones?
- A : To reset the headphones, turn them off, then press and hold the power button for 10 seconds until you see the LED indicators flashing.
- Q: Can I use the headphones while charging?
- A : Yes, you can use the headphones while they are being charged. However, it is recommended to let them charge fully before extended use.
Introduction
Thank you for purchasing the BNX-60 by Lindy. These wireless noise-canceling headphones have been developed to deliver superb quality Hi-Fi sound using advanced aptx® technology without the distraction of annoying background noise.
Product Contents
- BNX-60 Headphones
- 3.5mm audio cable 1.5m
- 1/4″ stereo-plug adapter
- Dual-plug flight adapter micro USB charging cable 80cm
- Hard carry EVA case with mesh pouch
- User manual
Features and Benefits
Overview
Safety
- Check the volume level before placing the headphones over your ears
- Do not listen to the headphones at high volume for excessive periods as this may damage your hearing
- Discontinue use if you experience any discomfort or irritation from using the headphones
- These headphones must not be worn whilst driving a motor vehicle
Charging the Battery
When the battery is low the LED (7) will flash red and an audio prompt (five
beeps) will be heard through the headphones. If you’re using a compatible iOS
device you can also see the status of the headphones battery on your device.
Plug the supplied USB charging cable into the charging port on the headphones
(1).
Plug the other end of the USB charging cable into the corresponding port on
either a USB mains power supply or a PC.
The LED indicator will light up red.
Charging from empty will take approximately 3 hours.
When the battery is fully charged, the LED indicator will switch from red to
off.
Important! Make sure that the BNX-60 are fully charged for at least 4
hours prior to initial use.
Operation
The BNX-60 can be used in a number of different configurations to suit your needs; Wired, Wireless, Noise Cancelling and Passive. For optimum audio performance, we recommend using the headphones with Noise Cancelling activated.
Noise Cancelling
Adjust the volume of the BNX-60 using the Volume Control Dial (8) to ensure
the volume is not too high. Switch on the Noise Cancelling feature by sliding
the On/Off Switch (9) to On, the Noise Cancelling Indicator (10) will
illuminate Blue After you turn the Noise Cancelling feature on you may hear a
slight hissing noise, this is normal and will cease after a few seconds. When
using the Noise Cancelling feature, if the battery level becomes low the Noise
Cancelling Indicator will become dim. If you continue to use the Noise
Cancelling feature the battery will eventually drain, if you are using a wired
connection you may still continue to use the headphones.
Pairing
Switch on the Wireless function by pressing and holding the Multi-Function
Button (3). If no previously paired device is found within range, the BNX-60
will automatically go into pairing mode and the LED Indicator will alternately
flash Green and Red.
Enable the Bluetooth function on your mobile phone or tablet.
Navigate to the Bluetooth menu of your device and scan/search for new devices.
When BNX-60 is found select it and follow the on-screen prompts. If you are
prompted for a passkey or pin-code, please use 0000
You will see a notification on your portable device confirming that pairing
and connection is complete.
Music Playback
Call Related Functions
Voice Dialling
The BNX-60 can be used for voice dialling if this feature is supported on your mobile phone. Please refer to your mobile phone’s manual for more information. To use the voice dialling feature, press and hold the multifunction button and wait for the voice prompt before saying the name of the contact you want to call.
Technical Specification
- Bluetooth 4.1
- Supports A2DP/HFP/HSP/AVRCP profiles
- aptx® Bluetooth HD audio technology – CSR 8645 Chipset Battery Life:
- Up to 15 Hours of Wireless Only
- Up to 30 Hours of Noise Cancelling Only
- Up to 12 Hours Wireless & Noise Cancelling Charging Time Up to 3 Hours
- Noise Cancellation Rate : 85%
- Built-in microphone for hands-free calling
- Answer, Reject, End, Volume +/-, Track +/- & Play/Pause Control
- Dynamic Driver Diameter : 40mm Neodymium
- Range: up to 15m (open space)
- Frequency Response : 20Hz-20kHz
- Impedance: 32+15% Ohm
- Sensitivity (S.P.L.): 85db+3db SPL/1kHz (OdB SPL=20uPa)
- Nominal THD : >0.2%
Declaration of Conformity
LINDY Electronics Limited
- Sadler Forster Way
- Teesside Industrial Estate
- Thornaby, Stockton-on-Tees
- TS17 9JY, England
- General T +44 1642 754000 | F +44 1642 754031
- |sales@lindy.co.uk
- Accounts T +44 1642 754035
- F +44 1642 754031
- accounts@lindy.co.uk
- Co. Reg No. 02132710 (Registered office as above)
- Vat Reg No. GB 472 0100 00
EU – CE Declaration of Conformity
LINDY-Elektronik GmbH
- Markircher Str. 20 – 24
- D-68229 Mannheim
- T +49 621 47005-0
- F +49 621 47005-990
- info@lindy.de
- lindy.com
- Geschäftsführer Jürgen Lindenberg & Peter Lindenberg
- Amtsgericht Mannheim HRB 786
- UST-ID-Nummer 143877063
- Steuer-Nummer 37002/36708
Premium headphones with Wireless Noise Cancelling
Manufacturer (EU)
- Lindy-Elektronik GmbH
- Markircher Str. 20 68229 Mannheim Germany
- T +49 621 470050
- info@Lindy.de
Manufacturer (UK)
- Lindy Electronics Ltd.
- Sadler Forster Way
- Stockton-on-Tees
- TS17 9JY, England
- T +44 1642 754000
- sales@Lindy.co.uk
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic
Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>