moonki MS-X265BT Speaker User Manual
- June 17, 2024
- moonki
Table of Contents
moonki MS-X265BT Speaker
Product Usage Instructions
- Pairing the Speaker with Bluetooth Device:
- Press MODE repeatedly on the MP3 player until Bluetooth mode is selected.
- Put your phone or device in Bluetooth device discovery mode.
- When your phone or device detects the BLUETOOTH device, confirm the link.
- Cautions:
- Avoid exposing the speaker box to moisture. Ensure it is under cover if used outdoors.
- Avoid using or storing the equipment in wet places to prevent malfunction or shock hazards.
- If the power cord is broken, have it replaced by the manufacturer, service agent, or qualified personnel to avoid risks.
- Do not expose the equipment to rain or moisture. Clean only with a soft, dry cloth.
- Charge the battery fully before using the speaker box to enhance battery life. Do not play and charge simultaneously to prevent battery life issues.
FAQ
- Q: Can I pair more than one device with the MS-115B speaker?
- A: The MS-115B speaker can be paired with one Bluetooth phone or audio device at a time.
- Q: How do I know if the speaker is in Bluetooth mode?
- A: Press the MODE button on the MP3 player until Bluetooth mode is selected. The speaker will indicate when it is ready for pairing.
Connection Bluetooth
- To pair the speaker with a Bluetooth phone or audio device, press “MODE” repeatedly on the MP3 player until select this mode.
- Put your phone or device to be used in Bluetooth device discovery mode.
- When your phone or device shows the “BLUETOOTH” device, confirm the link.
CAUTION
- Avoid exposing the speaker box to moisture. If they are set up outdoors, Be Sure they are undercover.
- Do not use nor store the equipment near damp places. It may cause a malfunction or shock hazard.
- If the power cord is broken, it must be replaced by the manufacturer’s service agent or qualified personnel to avoid risks.
- To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
- Clean only with a soft, dry cloth.
CAUTION: BEFORE USING THE SPEAKER BOX, PLEASE CHARGE THE BATTERY FULLY,
IT IS BETTER FOR BATTERY LIFE.
DON’T PLAY THE SPEAKER BOX AND CHARGE THE BATTERY AT THE SAME TIME, OTHERWISE,
IT WILL AFFECT BATTERY LIFE.
Welcome to the instructions of your speaker
Box contents
- 1 x speaker
- 1 x remote control.
- 1 x user manual
- 1 x USB cable – TYPE C
specifications
Speaker powered by 2-way Bluetooth
- PMPO Power: 900W
- RMS Power: 60W
- Noise/signal ratio: 76.1dB
- Response frequency: 65HZ-18KHZ
- Woofers: 2 x 6.5”
- Tweeters: 1 x 1”
- Bluetooth version: 5.0
- Equalization: Normal (Nor), Classic (cla), Popular (pop), Rock (roc), Jazz (jaz), Vocal (VOC).
- Inputs: Bluetooth, Auxiliary, DC Input
- Charging input: USB TYPE-C 5V
- Battery type: lithium
- Battery life: 3 HRS (depending on how to use)
- Charging time: 4.5 HRS
- Unit measurements: 240257641CM
- Unit weight: 5.7kg
- Box measurements: 29.529.573 cm
- Box weight: 6.8 kg
- Includes: USB Type-C cable, Controller Remote
Remote Control
- 1- Press to play a song or pause during the playback of a music.
- 2- In playback mode press to set an equalizer mode,
- 3- Vol+/Vol –
- 4- Previous: Press once to skip the previous song, press and Hold to rewind.
- 5- Next /: Press once to skip the next song, and press and hold to advance.
- 6/7/8- The buttons have no function.
- 9- Model: Select and type of operation, the options are AUX and Bluetooth.
- 10- Battery compartment (CR2025)
Panel Specifications
- MIC1/ MIC2: 6.3.5mm input for wired microphones
- AUX: 3.5mm AUX IN
- OFF/ON: on/off
- Indicator light: When using the power cord
- Type-C charging for charging audio via the Type-C port, the indicator charging button turns red.
- When the battery is full, the indicator
- The charging button turns green
- Type-C Port: Charge via this port 5V type-c
- MIC VOL: adjust the microphone volume
- VOLUME: Adjusts the master volume
- ECHO: Adjusts the ECHO effect
- BLUETOOTH: press the button to enter Bluetooth mode
Instructions
- Pause button: When playing music, press this button to pause playback.
- EQ button: In music playback mode, you can switch between modes normal, classical, pop, rock, jazz, and rock by pressing this button.
- Mic PRI Button: Press this button to set the phone’s priority mode.
- TWS button: enter Bluetooth mode first, then press the TWS button, the screen master flashes, and when the slave does not flash, the pairing is successful.
- Bluetooth devices can be connected through the main speaker to play music synchronously between the two devices.
- DeI Button: In “TWS” mode, the paired device can be deleted by pressing this button.
- Only two units of the same model can be paired Previous song button: In music playback mode, you can switch go to the previous song by pressing this button.
- Next song button : In music playback mode, you can switch to the next song by pressing this button.
- Mode Button: Press this button to switch between “aux”, and “Bluetooth”.
- Light button: short press to control the potentiometer blue backlight of “volume” and the red light of two subwoofers at the same time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>