MOONKI MS-X265BT Sound Tower Has Arrived Speaker User Manual
- June 17, 2024
- moonki
Table of Contents
SPEAKER
MS-X265BT
NECHO EN RPC
MS-X265BT Sound Tower Has Arrived Speaker
USER MANUAL
Welcome to the tutorial from your speaker
Box contents:
1 speaker.
1 remote control.
1 user manual.
1 USB cable – TYPE C
Specifications
2 Powered Bluetooth Speaker ways
PMPO power: 900W
RMS power: 60W
Noise/Signal Ratio: 76.1dB
Response Frequency: 65HZ-18KHZ
Woofers: 2 x 6.5”
Tweeters: 1 x 1”
Bluetooth version: 5.0
Equalization: Normal (Nor), Classic (cla), Popular (pop), Rock (roc),
Jazz (jaz),Vowel (voc).
Inputs: Bluetooth, Auxiliary, DC Input
Charging input: USB TYPE-C 5V
Battery type: lithium
Battery Life: 3 HRS (depending on mode of use)
Time load: 4.5 HRS
Measures Unit size: 240257641CM
Weight Unit weight: 5.7kg
Measures Box: 29.529.573CM
Weight Box: 6.8kg
Includes: USB Type C Cable, Control Remote
Remote control
1- Press to play a song or pause during
the playing a song.
2- In playback mode, press to set a mode equalizer,
3- Vol+/Vol 4-
4- Previous: Press once to skip to the previous song, press and Press and hold
to go back.
5- Next / : press once to skip to the next song, press and hold to advance
forward.
6/7/8- The buttons have no function.
9- Model: Selection and modality of operation, options are AUX, bluetooth.
10- Battery compartment (CR2025)
The manufacturer reserves the right to modify specifications without prior
notice.
Panel Specifications
MIC1/ MIC2: 6.3.5mm input for wired microphones
AUX: 3.5mm AUX IN OFF/ON: On/Off switch
Indicator light: When using the Type C charging cable to charge audio
through the Type C port, the charging indicator is red. When the battery is
full, the charging indicator is green
Type c port: Charge through this port 5V type C
MIC VOL: adjust the microphone volume
VOLUME: Adjust the master volume
THREW OUT: Adjust the ECHO effect
BLUETOOTH: press the button to get into to bluetooth mode
Pause button: When playing music, press this button to pause playback.
EQ button: In music play mode, you can switch between modes normal,
classical, pop, rock, jazz and rock by pressing this button.
Mic PRI Button: Press this button to set the microphone priority mode.
phone.
TWS button: Enter Bluetooth mode first, then press the TWS button, the
master screen flashes, and when the slave does not flash, pairing It is
successful. Bluetooth devices can be connected through the speaker main to
play music synchronously between the two devices.
DeI Button: In “TWS” mode, the paired device can be removed by pressing
this button.
*only two units of the same model can be paired
Previous song button: In music play mode, you can switch to the previous
song by pressing this button.
Next song button: In music play mode, you can switch to the next song by
pressing this button.
Mode button: Press this button to switch between “aux”, “bluetooth”.
Light button: short press to control the blue backlight of the
potentiometer “volume” button and the red light of two subwoofers at the same
time.
Conection Bluetooth
- To pair the speaker with a bluetooth phone or audio device, press “MODE” reapeatedly on the MP3 player until select this mode.
- Put your phone or device to be used in bluetooth device discovery mode.
- When your phone or device shows the “BLUETOOTH” device, confirm the link.
CAUTION
Avoid exposing the speaker box to moisture. If they are set up outdoors, Be
Sure they are under cover.
Do not use nor store the equipment near wet or dap places. It may cause a
malfunction or shock hazard.
If the power cord is broken, it must be replaced by the manufaturer or service
agent or qualifield personnel to avoid risks.
To reduce the risk of fire or electric shock, do not expose this equipament to
rain or moisture.
Clean only with a soft, dry cloth.
CAUTION: BEFORE USE SPEAKER BOX, PLEASE CHARGE BATTERY FULLY, IT IS
BETTER FOR BATTERY LIFE.
DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE SAME TIME, OTHERWISE IT WILL
AFFECT BATTERY LIFE.