Wapaneus XJ-NFI Foot Pocket Heated Blanket Electric Throw User Manual
- June 17, 2024
- Wapaneus
Table of Contents
Wapaneus XJ-NFI Foot Pocket Heated Blanket Electric Throw User Manual
– FOR PERSONAL USE ONLY –
IMPORTANT NOTE
Read the entire manual carefully before using this device.
Blanket Features
1. Power Cord
2. Blanket Connector
3. Control Panel
4. Control Connector
Introduction
Please read this user manual carefully and keep it in a safe place for future reference. If you need any assistance, please contact our support team.
Included 1x Heated blanket
1 x Hand-held controller
1 x Warning instruction page
Product Specifications
( Note: Pis check first to make sure the product is complete without any
damage.
If you have any doubt, pis feel free to contact us.)
Symbol Explanation
IMPORTANT INSTRUCTIONS
DO NOT DESTROY
WARNINGS AND SAFEGUARDS
TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, OVERHEATING, FIRE AND PERSONAL
INJURY, THIS PRODUCTS MUST BE USED IN ACCORDANCE WITH THE FOLLOWING
INSTRUCTIONS:
- READ ALL INSTRUCTIONS BEFORE USING THE PRODUCTS.
- THE PRODUCTS IS DESIGNED ONLY TO WARM UP THE HUMAN BODY.
- KEEP ALL DOGS, CATS AND OTHER PETS AWAY FROM THIS HEATED PRODUCT. THIS IS AN ELECTRICAL APPLIANCE THAT THHEY CAN DAMAGE OR BE INJURED BY.
- DO NOT USE The HEATED PRODUCT Willi AN INFANT, A CHILD (0-3 YEARS OLD), AN INCAPACITATED OR IMMOBILE PERSON, A PARAPLEGIC, A QUADRIPPLEGIC, A DIABETIC, ONE INSENSITIVE TO HEAT SUCH AS A PERSON WITH POOR BLOOD CIRCULATION OR ANYONE WHO CANNOT CLEARLY UNDERSTAND THE INSTRUCTIONS AND /OR OPERATE THE CONTROLS.
- THIS PRODUCT CAN BE USED ON CHILDREN (3-8 YEARS OLD) ONLY UNDER SUPERVISION FROM ADULTS AND IF TliEY HAVE BEEN GIVEN ADEQUATE INSTRUCTIONS ON HOW TO USE IT SAFELY.
- THIS PRODUCT CAN BE USED BY CHILDREN OVER THE AGE OF 8, PEOPLE WITH REDUCED PHYSICAL, SENSORY OR MENTAL SKILLS AND PEOPLE LACKING EXPERIENCE OR KNOWLEDGE OF THEY ARE SUPERVISED AND HAVE BEEN INSTRUCTED ON HOW TO USE IT SAFELY, AJU.Y AWARE OF TliE CONSEQUENT RISK OF USE.
- CHILDREN SHOULD NOT PLAY WITH THE PRODUCT,
- CLEANING AND MAINTENANCE MUST NOT BE PERFORMED BY CHILDREN UNLESS SUPERVISED.
- DO NOT USE The PRODUCT ON A WATERBED, SOFA, BUNK BED OR MECHANICALJ.Y ADJUSTABLE BED.
- DO NOT USE The PRODUCT WITH ROCKING CHAIRS, RECLINERS, CHAIR Willi CASTERS OR WHEELS OR OTHER FURNITURE SUBJECT TO MOVEMENT.
- DO NOT USE WITH ANOTHER ELECTRICALLY HEATED PRODUCT SUCH AS A ELECTRIC BLANKET, ELECTRIC MATTRESS PAD OR HEATED THROW.
- DO NOT TUCK IN, PINCH, FLEX OR EXPOSE THE HEATING WIRE. DO NOT WRAP OR TUCK THE PRODUCT, SUPPLY CORD OR CONTROL IN A SOFA OR OTHER FURNITURE. ALL PORTIONS OF THE PRODUCT AND CONTROU.ER SHOULD BE VISIBLE AT ALL TIMES.
- DO NOT PUNCTURE; DO NOT FASTEN IN PLACE USING PINS OR OTHER METALLIC OBJECTS.
- NEVER USE PINS IN AND AROUND THE PRODUCT. THEY MAY DAMAGE THE ELECTRIC WIRING.
- DO NOT ROUTE ELECTRICAL CORDS BETWEEN The MATTRESS AND BOX SPRING. DO NOT ALLOW THE CORDS TO BE PINCHED.
- DO NOT PULL, TWIST OR MAKE SHARP BENDS ON The CORDS.
- DO NOT USE WITH DAMAGED CORDS. DAMAGED CORDS CAN LEAD TO POSSIBLE OVERHEATING OR FIRE.
- WRAPPING THE CORD AROUND The CONTROLLER MAY DAMAGE THE CORD. LOOP LOOSELY WHEN STORING.
- IF The PLUG DOES NOT FIT INTO OUTI.ET , CONTACT A QUALIFIED ELECTRICIAN.
- MAKE SURE THE CORD FROM THE CONTROLLER TO YOUR HEATED PRODUCT IS CONNECTED AND LOCKED TIGKTLY.
- DO NOT DRY CLEAN The PRODUCT. CLEANING LIQUILD MAY DAMAGE THE INSULATION OF THE HEATING ELEMENT. IMPROPER LAUNDERING MAY CAUSE PROBLEMS WITH THE HEATING WIRE WHICH CAN LEAD TO FIRE.
- The PRODUCT IS NOT DESIGNED FOR MEDICAL USE IN HOSPITALS.
- The ELECTRICAL AND MAGNETIC FIELDS EMITTED BY THE PRODUCT MAY INTERFERE WITH FUNCTIONS OF MEDICAL DEVICES LIKE A PACEMAKER. PLEASE CONSULT YOUR DOCTOR BEFORE USE IF YOU ARE EQUIPPED WITH A MEDICAL DEVICE.
- PLEASE CHECK THE PRODUCT FREQUENTLY FOR SIGNS OF DAMAGE OR WEAR AND TEAR. IF SUCH SIGNS ARE EVIDENT, IF THE PRODUCT HAS BEEN USED INCORRECTLY OR IF IT NO LONGER HEATS UP, IT MUST BE CHECKED BY THE MANUFACTURER BEFORE BEING SWITCHED ON AGAIN. THERE ARE NO USER SERVICEABLE PARTS,
- IF THE MAINS CONNECTION CORD IS DAMAGED, IT MUST BE DISPOSED OF; IF THE CORD CANNOT BE REMOVED FROM THE PRODUCT, THE PRODUCT SHOULD BE DISPOSED OF ALONG WITH THE CORD.
- NEVER PUU. BY THE CORD OR USE THE CORD AS A HANDLE; DO NOT PINCH THE CORD.
- THE ELECTRONIC COMPONENTS IN THE CONTROLLER WOULD WARM UP WHEN THE PRODUCT IS IN USE. FOR THIS REASON, THE CONTROLLER MUST NEVER BE COVERED WHILE IN USE.
- THE PRODUCT MAY EXPERIENCE INCREASED HEAT IN AREAS WHERE HEATED PRODUCT IS BUNCHED OR FOLDED WHILE IN USE. SO THE NEVER FOLDED, BALLED UP OR BUNCHED THEPRODUCT IN ANY WAY WHEN IN USE. MAY RESULT IN OVERHEATING AND/OR PERMANENT WRINKING OF THE FABRIC.
- DO NOT USE IN AN ENVIRONMENT WITH OVERLY ABUNDANT OXYGEN.
- KEEP THE CONTROLLER AWAY FROM DRAFTY AREAS THAT MAY BEFOME DAMP OR WET SUCH AS AN OPEN WINDOW.
- TURN OFF OR UNPLUG THE CONTROU.ER FOR THE PRODUCT WHEN NOT USING. NEVER LEAVE UNATTENDED WHILE USING, ESPECIALLY WHILE CHILDREN ARE PRESENT.
- BESURE THIS PRODUCT IS USED ONLY ON AN AC SUPPLY CURRENT CIRCUIT OF 110-120 VOLTS 60HZ. DO NOT USE WITH AN EXTENSION CORD. DO NOT USE WITHGENERATORS, POWER CONVERTERS, OR INVERTERS.
- THE PRODUCT SHOULD ONLY BE USED IN CONJUNCTION WITH THE SPECIFIED CONTROLLER.
- MUCH WASHING AND IMPROPER WASHING MAY CAUSE THE DAMAGE OF THE PRODUCT AND BESURE TO WASH THE PRODUCT ACCORDING TO THE INSTRUCTION ON THE LABEL ON THE PRODUCT,
- DO NOT USE IF THE PRODUCT IS WET.
- THE CONTROU.ER IS NOT WATERPROOF. DO NOT IMMERSE IN WATER.
- NEVER IRON THE PRODUCT.
- DO NOT USE WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS.
- FOR HOUSEHOLD USE ONLY.
- NOT FOR HOTEL, MOTEL, OR OTHER INSTITUTIONAL USE.
SAVE THESE INSTRUCTIONS; DD NOT DESTROY
POLARIZED PLUG:
Plug power cord into a 110-120 volt wall outlet. Do not attempt to force the
plug. This appliance has a polarized plug{one blade is wider than the other).
To reduce the risk of electrical shock, this plug is intended to fit only one
way into an outlet. If the plug does not fit in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way. If the plug fits loosely into the AC outlet or if the ac outlet feels warm do not use that outlet.
FCC CERTIFIED
Th is product complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions,
1.Th is product may not cause harmful interference, and
2.This product must accept any interference received, including interference
that may ca use undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or televisions reception ,which can be determined by turning the product off and on, the user is encouraged to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
Increase the separation between the product and receiver.
Connect the product into an outlet on a circuit different from that to which the receiver is connected.
*Consult the dealer or an experienced radio tv technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
When setting up your heated product be sure to follow these steps in order:
1. locate cord connector on the product near the care instructions label.
2. Do not plug into the wall outlet until you have connected the controller
cord to the product
3.To connect the cable to the connector, align the connector and cable arrows
and push gently until it locks.
CAUTION, The cable must be fully plugged in. A loose connection could cause a
fire hazard.
4. Plug the power cord into al 10-120 wall outlet.
5. Make sure all cords are tangle free and not trapped or pinched in any wag,
including but not limited to between mattress and box spring, sofa cushions,
against wall, chairs, or other furniture.
6. Do not wrap the controller in the throw while in use
7 .Do not use with generator power.
8. To disconnect the controller, first unplug the cord from the outlet, then
pinch sides of the connector and pull apart.
CAUTION:
PLEASE follow these directions in order they are given to ensure the product
will work correctly. Do not turn on the product until it has been fully
assembled.
How To Use Your Heating Blanket
Before each use, always inspect the product to ensure there is no damage to
the power cord, the Control, or the Heating Blanket .
- The Heating Blanket Connector and Control Connector are designed to connect only one way. Align the inner prongs and then push together until Connectors are secure {see Fig.I).Plug the product into a 120-volt AC electrical outlet.
NOTE: If there is no power, make sure the AC electrical outlet is functional and the connection in step 1 is secure. Discontinue use if failure continues.
Using Your Heated Product:
User Tip: The fastest way to preheat is to set the product at the highest
heating level after turning on it.
CAUTION: Do not connect the control to the power supply before connecting it
to the heated product.
CAUTION: ALWAYS turn the product OFF when not in use.
Note: To restart all products after a power failure, Press the power button
and the heated product will begin to warm.
Auto Off Function:
CARE INSTRUCTIONS
Before Washing or Storing Your Heated Bedding Product:
1. Disconnect power cord from wa II BEFORE detaching control cord from the
heated product.
1. Ensure that no cords are slill connected and none of the wires have worn
th rough the fabric.
3. Carefully follow al I washing instructions or your heated product may sh
rink and possibly cause a fire hazard.
• DO NOT submerge control in water.
• DO NOT dry clean )’Jur heated product, Dry cleaning solvents may damage the
wires.
• DO NOT use bleach or cleaning fluids.
• DO NOT use a wringer.
• DO NOT iron )’JUr heated product.
• DO NOT use mothballs or sprays of any kind.
• DO NOT reconnect the heated product or use it until it is COMPLffilY dry.
• DO NOT wash or put into water the power cord or any of the product’s cords.
• DO NOT use analgesic cream in combination with your heated product.
Taking care of your heated product is easy and safe as long as you follow a few simple steps.
Machine Washing
I. Presoak the blanket for 15 minutes in mild soap and cold water.
2. Wash in mi Id soap and cold water on the ‘delicate” or “gentle” cycle in
the washer for two minutes. Remember, do not use bleach.
3. Rinse in fresh, cold water.
4 Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution, Do not use commercial dryers or the dryers at your local
Laundromat.They get too
hot and would damage the wiring of the heated p1oduct.
I. Preheat the dryer on the ‘low”tem peratu re setting for 2 minutes.
1. Place blanket into the dryer and tumble dry for 10 minutes at a low
temperature.
3. Remove the blanket while it is still damp and gently stretch it to its
original size.
4. Drape the heated product over a clothesline or a shower rod. DO NOT use
clothespins
5. Heated product must be COMPLETELY dry before reconnecting the power plug
or control plug.
Hand Drying
I. Gently stretch the blanket back to its original size.
2. Drape the heated product over a clothesline or hang over a shower rod.DO
NOT use clothespins.
3. Heated product must be COMPLETELY dry before reconnecting the power plug
or control plug.
QUESTIONS & ANSWERS
If the above suggestions could not solve the problems, this might result from the permanent swilch-011 protection via the safety system. In this case, please contact our customer service.
Customer Support:
Read More About This Manual & Download PDF: