kogan KALED65R94KA Smart 4K UHD TV User Guide

QUICK START GUIDE

Roku TV
SMART 4K UHD TV
KALED50R94KA
KALED55R9O4KA
KALED65R94KA

PREPARATION

Unpacking
and
Installation
Note꞉ 
The
pictures
are
only
for
reference.

Standard
Accessories

Stand
Installation
Step
1꞉ Take
out
the
TV
and
carefully
put
it
(screen
downward)
on
a stable
and
flat
table
with
a
soft
cloth
 or
cushion
on
it.
Step
2꞉ 
Please
check
to
make
sure
there
are
the
same
mark
(A/B)
on
the TV
back
and
the
correct
 stand.
This
step
is
not
available
for
the
stands without
any
mark
on
it,
or
not
available
for
the
TV
with
 one
stand
only.
Step
3꞉ Fix
the
stands
to
the
TV
by
using
the
matching
screws
provided
in the
box.
The
stands
may
 vary
depending
on
the
region
or
model.

WARNING
AND
PRECAUTION

Read
all
of
the
instructions
before
operating
the
set.
Keep
these
instructions for
later
use.
Important
Safety
Instructions

• Read
these
instructions
–
All
the
safety
and
operating
instructions
should
be
read
before
this
product
 is
operated.

• Keep
these
instructions
–
The
safety
and
operating
instructions
should
be
retained
for
future
 reference.

• Heed
all
warnings
–
All
warnings
on
the
appliance
and
in
the
operating
instructions
should
be
adhered
to.

• Follow
all
instructions
–
All
operating
and
use
instructions
should
be
followed.

• Do
not
use
this
apparatus
near
water
–
The
appliance
should
not
be
used
near
water
or
moisture
–
for
 example,
in
a
wet
basement
or
near
a
swimming
pool,
and
the
like.

• Clean
only
with
dry
cloth.

• Do
not
block
any
ventilation
openings.
Install
in
accordance
with
the
manufacturer’s
instructions.

• Do
not
install
near
any
heat
sources
such
as
direct
sunlight,
radiators,
heat
registers,
stoves,
or
other
 apparatus
(including
amplifiers)
that
produce
heat.

• Do
not
defeat
the
safety
purpose
of
the
polarized
or
grounding
plug.
A
polarized
plug
has
two
blades
 with
one
wider
than
the
other.
A
grounding
plug
has
two
blades
and
a
third
grounding
prong.
The
wide
 blade
or
the
third
prong
is
provided
for
your
safety.
If
the
provided
plug
does
not
fit
into
your
outlet,
 consult
an
electrician
for
replacement
of
the
obsolete
outlet.

• Protect
the
power
cord
from
being
walked
on
or
pinched
particularly
at
the
plugs,
convenience
 receptacles,
and
at
the
point
where
they
exit
from
the
apparatus.

• Only
use
attachments/accessories
specified
by
the
manufacturer.

• Use
only
with
the
cart,

stand,

tripod,

bracket,

or

table

specified

by

the

manufacturer,
or 
sold
with
the
apparatus.
When
a
cart
or
rack
is
used,
use
caution
when
moving
the
cart
/

sold
with
the
apparatus.
When
a
cart
or
rack
is
used,
use
caution
when
moapparatus
combination
to
avoid
injury
from
tip‑over.

• Unplug
the
apparatus
during
lightning
storms
or
when
unused
for
long
periods
of
time.

• Refer
all
servicing
to
qualified
personnel.
Servicing
is
required
when
the
apparatus
has
been
damaged
in
any
way,
such
as
power
supply
cord
or
plug
is
damaged,
liquid
has
been
spilled
or
objects
have fallen
into
the
apparatus,
the
apparatus
has
been xposed
to
rain
or
moisture,
does
not
operate
normally,
or
 has
been
dropped.

• CAUTION꞉
These
servicing
instructions
are
for
use
by
qualified
service
personnel
only.
To
reduce
the risk
of
electric
shock,
do
not
perform
any
servicing
other
than
that
contained
in
the
operating
 instructions
unless
you
are
qualified
to
do
so.

• Do
not
install
this
equipment
in
a
confined
or
building‑in
space
such
as
a
book
case
or
similar
unit,
and
 remain
a
well
ventilation
conditions
at
open
site.
The
ventilation
should
not
be
impeded
by
covering
the
 ventilation
openings
with
items
such
as
 newspaper,
table‑cloths,
curtains
etc.

• Please
refer
the
information
on
rear
enclosure
for
electrical
and
safety
information
before
installing
or
 operating
the
apparatus.

• To
reduce
the
risk
of
fire
or
electric
shock,
do
not
expose
this
apparatus
to
rain
or
moisture.

• The
apparatus
shall
not
be
exposed
to
dripping
or
splashing
and
that
no
objects
filled
with
liquids,
such
as
vases,
shall
be
placed
on
the
apparatus.
Do
not
use
the
set
near
dust
place.

• For
the
terminals
marked
with
symbol
of
“
 ”
may
be
of
sufficient
magnitude
to
constitute
a
risk
of
electric
shock.
The
external
wiring
connected
to
the
terminals
requires
installation
by
an
instructed
 person
or
the
use
of
ready‑made
leads
or
cords.

• To
 prevent
 injury,
 use
 the
 stand/wall‑mount
 bracket
 to
 securely
 install
 this
 apparatus
 on
 the
 table/wall
in
accordance
with
the
installation
instructions.

• Danger
of
explosion
if
battery
is
incorrectly
replaced.
Replace
only
with
the
same
or
equivalent
type.

• The
 battery
 (battery
 or
 batteries
 or
 battery
 pack)
 shall
 not
 be
 exposed
 to
 excessive
 heat
 such
 as
 sunshine,
fire
or
the
like.

• Excessive
 sound
 pressure
 from
 earphones
 and
 headphones
 can
 cause
 hearing
 loss.
 Listening
 to
 music
at
high
volume
levels
and
for
extended
durations
can
damage
one’s
hearing.
In
order
to
reduce
 the
risk
of
damage
to
hearing,
one
should
lower
the
volume
to
a
safe,
comfortable
level,
and
reduce
 the
amount
of
time
listening
at
high
levels.

• The
appliance
coupler
is
used
as
disconnect
device,
the
disconnect
device
shall
remain
readily
operable.

• When
not
in
use
and
during
movement,
please
take
care
of
the
power
cord
set,
e.g.
tie
up
the
power
 cord
set
with
cable
tie
or
something
like
that.
It
shall
be
free
from
sharp
edges
and
the
like
that
can
 cause
abrasion
of
the
power
cord
set.
When
put
into
use
again,
please
make
sure
the
power
cord
set
 being
not
 damaged,
 If
 any
damages
found,
please
look
for
the
service
person
to
replace
the
power
 cord
set
specified
by
the
manufacturer
or
have
the
same
characteristics
as
the
original
one.

• Attention
should
be
drawn
to
environmental
aspects
of
battery
disposal.

• No
naked
flame
sources,
such
as
lighted
candles,
should
be
placed
on
the
apparatus.
To
prevent
the
 spread
of
fire,
keep
candles
or
other
open
flames
away
from
the
apparatus
at
all
times.

• 
If
the
apparatus
have
the
symbol



in
its
rating
label
and
the
power
cord
has
two
pins,
it
means
that
 the
equipment
is
 a
Class
 II
 or
double
insulated
electrical
appliance.
 It
 has
been
designed
in
such
a
 way
that
it
does
not
require
a
safety
connection
to
electrical
earth.(Only
for
Class
II
appliance)

• Warning
 for
Apparatus
containing
COIN/BUTTON
CELL
BATTERIES
(Below
instruction
only
used
 for
 the
apparatus
containing
a
user‑replaceable
coin/button
cell
battery)
  WARNING꞉
  Do
not
ingest
the
battery,
Chemical
Burn
Hazard

(The
remote
control
supplied with)
this
 product
contains
a
coin/button
cell
battery.
If
the
coin/button cell
battery
is
swallowed,
it
can
 cause
severe
internal
burns
in
just
2
hours and
can
lead
to
death.
Keep
new
and
used
batteries
 away
from
children.
If
the battery
compartment
does
not
close
securely,
stop
using
the
 product
and
keep it
away
from
children.
If
you
think
batteries
might
have
been
swallowed
or placed
inside
any
part
of
the
body,
seek
mmediate
medical
attention.

• This
lightning
flash
with
arrowhead
symbol
within
an
equilateral
triangle 
is

Intended

to

alert

the

user

to

the

presence

of

non‑insulated

 
“dangerous
voltage”
within
the
product’s
enclosure
that
may
be
of
 To
reduce
the
risk
of
electric
shock.

Do
not
remove
cover
(or
back).

No
user
serviceable
parts
inside.
 Refer
to
qualified
service
personnel.
  The
exclamation
point
within
an
equilateral
 triangle
 is
 intended
to
alert the
user
to
the
presence
of
 important
operating
and
maintenance
instructions in
the
literature
accompanying
the
appliance.

• The
following
information
are
recommended
to
be
included
as
far
as
applicable
where
applicable꞉

****	Refer to alternating current(AC).		Refer to stand‑by or power on.
****	Refer to direct current(DC).		Refer to power on.
Refer to ClassII equipment.		Refer to dangerous voltage.

WEEE
Directive
****Correct
 Disposal
 of
 this
 product.
 This
 marking
 indicates
 that this
 product
 should
 not
 be
 disposed
with
other
household
wastes throughout
the
EU.
To
prevent
possible
harm
to
the
 environment
or
human health
from
uncontrolled
waste

disposal,
recycle
it

responsibly

to 
promote the
sustainable
reuse
of
material
resources.
To
return
your
used
device, please
use
 the
return
and
collection
systems
or
contact
the
retailer
where the
product
was
purchased.
They
can
take
this
product
for
environmental
safe recycling.

Positioning
the
TV

• Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
• Fix the rear of enclosure to wall (only for some countries)
• Warning꞉ Stability Hazard
  A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as꞉
  ‑ ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
  ‑ ALWAYS use furniture that can safely support the television set.
  ‑ ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
  ‑ ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
  ‑ ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
  ‑ NEVER place a television set in an unstable location.
  ‑ NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
  ‑ NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
  ‑ NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
  If the existing television set is being retained and relocated, the same considerations as above should be applied.

Mounting on a Wall

• An optional wall mount can be used with your television.
  Consult with your local dealer to purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor.
  If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. Please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.

• To prevent product damages or personal injuries, please make sure that the TV screen is kept upright, or tilted upward or downward within the angle range of 0 ~5 while mounting the TV onto the wall.

• In case of exceeding the above angle range (0 ~5 ) of tilting downward, please purchase the auxiliary accessories from the local dealer to mount the TV for safe installation and usage. Otherwise, it will not be covered by the warranty and the user should be liable for all consequences and responsibilities.

• Disconnect
the
power
before
moving
or
installing
the
TV.
Otherwise
electric
shock
may
occur.

• Remove
the
stand
before
installing
the
TV
on
a
wall
mount
by
performing
the
stand
attachment
in
reverse.

• If
you
install
the
TV
on
a
ceiling
or
install
the
TV
slantly,
it
may
fall
and
result
in
severe
personal
injury.
  Use
an
authorized
wall
mount
and
contact
the
local
dealer
or
qualified personnel.
Otherwise
it
is
not
 covered
by
the
warranty.

• Do
not
over
tighten
the
screws
as
this
may
cause
damage
to
the
TV
and
void
your
warranty.

• To
 prevent
 injury,
 this
 apparatus
 must
 be
 securely
 attached
 to
 the
 wall
 in
 accordance
 with
 the
 installation
instructions.

• Use
the
screws
and
wall
mounts
that
meet
the
following
specifications.
Any
damages
or
injuries
by
 misuse
or
using
an
improper
accessory
are
not
covered
by
the
warranty.

Note꞉

1. The pictures are only for reference.
2. For the TV sets with terminals towards the wall, in order to leave enough space to use the terminals, a plastic spacer is needed together with each screw to fix the wall mount. It is a small hollow pillar, the height of which is ≥30mm.

Precautions For Using Remote Control

• Use the remote control by pointing it towards the remote sensor. The items between the remote control and the remote sensor will interfere the normal operation.
• Do not make remote control vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in high humidity place.
• Do not place remote control under direct sunlight which will cause deformation of the unit by heat.
• When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.

Precautions For Using Battery
Improper using of the battery will cause leakage. So please do as the following methods and use carefully.

1. Please note the batteries polarity, to avoid short circuit.
2. When the battery s voltage is insufficient which affect the use range, you should replace new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
3. Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose of batteries in compliance with relevant environmental protection regulations.
6. WARNING꞉ The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Install Remote Control Batteries
Place two AAA size batteries in the remote control’s battery compartment, making sure to match the polarity markings inside the compartment.

Installation of Restraining Bracket (Only for some countries or models)
To prevent the TV from toppling over by some sudden circumstances like earthquake, shock, climbing by a child, etc., you are asked to install the restraining brackets before using the TV according to the following instructions and pictures꞉

1. Take out the accessories supplied with the TV from the package. (Pic.1)
   ● TV Restraining Bracket꞉ 2 PCS
   ● TV Restraining Screw꞉ M6 X 2PCS

2. Use the TV restraining screws to fasten the TV restraining brackets on the TV rear cabinet. (Pic.1)

3. Fix the wall restraining brackets (bought by yourself) on the wall. (Pic.2)

4. Connect the TV restraining brackets and wall restraining brackets tightly with the ropes. (Pic.1 & Pic.2)

Note꞉

1. Please install the TV near the wall so that it doesn’t fall backwards.
2. Please buy the wall restraining brackets (2pcs) and ropes (2pcs) by yourself as you need.
3. If the accessories does not have TV Restraining Brackets and TV Restraining Screws, it may be have installed on the TV.

TERMINAL CONNECTION

Note꞉

1. The pictures are only for references.
2. Terminal quantities and names may vary depending on the region or model.
3. External equipments and cables shown herein are not supplied with the TV.
4. “RESET” button can be used to restart the TV, or by the service engineer to update the TV software system through a USB device.

AV IN
Receive analog audio and video signals from external AV devices.|
---|---
ANTENNA IN
Connect a coaxial cable to receive signals from the antenna.|
USB
Connect a USB storage device.|
HDMI
Receive digital video and audio signals from external HDMI devices.|
DIGITAL AUDIO OUT
Use an optical cable to output your TV’s audio signal to a  compatible digital audio receiver.|
LAN
Wired network port|

REMOTE CONTROL

Note꞉

1. The picture is only for reference.
2. The image, buttons and functions of remote control may vary depending on the region, model or source.

1. POWER ( )꞉

• Use the Power button to turn on or turn off the TV.

• TV will be in active standby for about 15 minutes after a Power button press to turn off the TV. The TV will enter passive standby after this time. On a Power button press to turn on the TV, the TV will resume instantly if in active standby or will take few seconds longer if in passive standby.
  GUIDE꞉ Access the Electronic Program Guide

  2.  Application Buttons꞉ Access specific applications quickly and directly.

  3. BACK ( )꞉ Go back to the previous menu or screen.

  4. HOME ( )꞉ Access the home screen.

  5. Navlgation ( )
     Navigate the menu to select the content you need.

  6. Channel Up/Down ( )꞉ Switch channels.

  7. Volume Up/Down ( )꞉ Adjust the sound volume.

  8. MUTE ( )꞉ Mute or restore the TV sound.

  9. STAR ( )꞉ Access the menu of TV settings, or access
     the menu of additional options in a specific screen.

  10. RETURN꞉ Return back to the previously‑viewed channel.

  11. Media Player Control Buttons
      PLAY/PAUSE ( )꞉ Start or pause playback.  Pause up to 90 minutes of live TV when you connect a 16GB or larger USB to your TV.
      • Fast Backward ( )꞉ Fast backward the playback.
      • Fast Forward ( )꞉ Fast forward the playback.

  12. Color Buttons (RED/GREEN/YELLOW/BLUE)꞉ Execute the prompt function in specific mode.

  13. Number Buttons (0~9)꞉
      Select a channel directly, or input a number.

  14. EXIT꞉ Exit the current menu.

  15. SUB꞉ Select subtitles.

BASIC OPERATION

Turn on or turn off the TV

1. Connect the power cord to the TV and wall outlet.
2. In standby mode, press POWER button on the remote control to turn on the TV.
3. In working status, press POWER button on the remote control to turn off the TV.
4. If you want to power off the TV completely, please pull out the power cord from the wall outlet.

TV Control Button
Instandby mode:
Short press TV control button to turn on the TV.
In working status:

*Long press TV control button and the TV will be in active standby for about 15 minutes. The TV will enter passive standby after this time. On a Power button press to turn on the TV, the TV will resume instantly if in active standby or will take few seconds longer if in passive standby.

• Short press TV control button to open the Inputs menu.

  • Close: Exit the Inputs menu.
  • Turn off TV: Turn the TV to standby mode.
  • Blueray Player: Access the external device connected through HDMI or AV terminal.
  • Live TV: Access the Live TV mode.
  • Home: Access the home screen.

Initial Setup

The first time you turn on the TV, a setup wizard will appear on the screen to guide you through all settings in Initial Setup.
Step 1: Select the menu language.
Step 2: Setup the TV usage environment. If you need to demonstrate the TV in a store, please select “Setup for store use”, which will consume more energy. If you need to use the TV at home, please select “Setup for home use”.
Step 3: Select whether or not to connect the TV to the wired or wireless network.

• If you don’t want to connect the TV to the network in this step, please skip directly to Step 4.
• If you have connected the TV to the wireless or wired network, you may be asked to select your time zone, and the TV may automatically check for updates.
  < Activate your smart TV> 
  After the TV is successfully connected to the network, you will see the activation screen with detailed instructions telling you how to activate your smart TV using your computer, smartphone or tablet to link to a Roku account. You need a Roku account to activate your Roku TV and access the entertainment across thousands of free and paid streaming channels. Roku doesn’t charge for activation support – beware of scams. Roku accounts are free and while a valid credit card number is not required to create a Roku account, saving your credit card information makes renting and purchasing entertainment from the Roku channel store fast and convenient.
  Step 4 : Connect your device to the TV through HDMI or AV terminal.
  Step 5: Select a name for the connected device.
  Step 6: Initial setup is completed.

Note:

1. Settings in Initial Setup may vary depending on the region or model. Please refer to the actual on-screen instructions.
2. If you want to restart the Initial Setup after the first time, please select <HOME → Settings → System  → Advanced system settings → Factory reset → Factory reset everything>.

TROUBLE SHOOTING

Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
General Problem/Solution

• Remote control does not work
  Change the batteries.
  Check if batteries are installed correctly.
  Check if main power is connected.
  Check if there are some items between remote sensor and remote control.

• Poor Signal
  Keep the TV at a sufficient distance from other electronic products.

Picture &
Sound/Solution

• No
picture,
no
sound
  Check
the
signal
source.
  Plug
another
electrical
device
into
the
outlet
to
check
if
it
is
working
or turned
on.
  Check
if
power
plug
is
in
good
contact
with
the
outlet.

• No
sound,
picture
OK
  If
no
sound,
unmute
the
sound
or
increase
the
volume.
  Open
the
sound
menu
and
adjust
‘Balance’.

• Abnormal
picture

For
no
color
or
bad
picture
quality,
you
may꞉

1. Adjust
the
color
option
in
menu
settings.

2. Keep
the
TV
at
a
sufficient
distance
from
other
electronic
products.

3. Try
another
channel.
   Bad
TV
signal
(Display
mosaic
or
snowflakes)

4. Check
the
signal
cable
and
adjust
the
antenna.

5. Fine
tune
the
channel.

6. Try
another
channel.

Multimedia
Player/Solution

‘This
file
is
invalid’/‘Unsupported
audio’
 appears
 ,
 or
audio
is
normal
but video
is
abnormal,
or
video
is
normal
but
audio
is
abnormal
The
media
file
maybe
damaged,
check
if
the
file
can
be
played
on
the
PC.
Check
if
video
and
audio
codec
is
supported.

Network/Solution
Network
failure
Check
if
the
router
works
well.
Make
sure
the
TV
has
connected
to
the
router
successfully.

Dimensions without stand
(W X H X D):| 50″:1110 X 650 X92 mm
55″:1225 X 718 X93 mm
65″:1445 X 837 X97 mm
Net weight without stand:| 50″: 8.9 kg
55″:10.7 kg
65″: 17.8 kg
RF aerial input:| 75 ohm unbalanced
Language of OSD:| Multiple options
System:| DTV: DVB-T/T2
ATV: PAL-B/G
Channel coverage:| DVB-T/T2: 174 MHz ~ 230 MHz,
470 MHz ~ 860 MHz
ATV: 44 MHz ~ 870 MHz
Environment:| Working temperature: 5°C~40°C
Working humidity: 20%~80%
Storage temperature: -15°C~45°C
Storage humidity: 10%~90%, non-condensing

Recommended Picture Mode

There are several choices in picture mode setting (Low power, Standard, Vivid, Sports, etc.). The default setting is Low power mode, it is recommended to watch at home. If you want to restore the picture mode to Low power, you can do the following.
Press< > button → TV settings → Picture settings → Picture mode → Low power.
Note: All the user settings will lose completely after operating the feature of “Factory reset”.

The
Adopted
Trademarks
HDMI,
HDMI
High‑Definition
Multimedia
Interface,
 and the
HDMI
Logo
are
trademarks
or
registered
trademarks
of
HDMI
 Licensing Administrator,
Inc.
in
the
United
States
and
other
countries.
For
DTS
patents,
see
http://patents.dts.com.
Manufactured
under
license
from DTS,
Inc.
or
DTS
Licensing
Limited.
DTS,
DTS
Studio
Sound,
and
the
DTS
logo are
 registered
trademarks
or
trademarks
of
DTS,
Inc.
in
the
United
States
and other
countries.
©
2021
DTS,
Inc.
ALL
RIGHTS
RESERVED.
Manufactured
under
license
from
Dolby
Laboratories.
Dolby,
Dolby
Audio,
and the
double‑D
symbol
are
trademarks
of
Dolby
Laboratories
Licensing Corporation. Roku,
Roku
TV,
the
Roku
logo,
and
the
purple
d‑pad
design
are
the trademarks
of
 Roku,
Inc.
All
other
trademarks
and
logos
herein
are
the property
of
their
 respective
owners.

Note꞉

1. The
pictures
in
this
document
are
only
for
reference.
2. Design
and
specifications
are
subject
to
change
without
notice.
3. In
dry
environment
due
to
static
electricity,
the
product
may
restart
and
return
to
the
main
OSD
interface,
USB
player
interface
or
the
previous
source
mode.
It
is
normal
and
please
continue
to
operate
the
TV
as
you
will.

NOTES

Need more information?
This is a Quick Start Guide, and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product’s instructions
and features can be found online at help.kogan.com

You
can
find
the
Roku
TV
user
guide
and
more
details
on
setting
up
the
TV by scanning
the
QR
code
below
or
by
following
the
link꞉ support.roku.com/en‑gb

References

• Patents - DTS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>