Consciot 10LEDS RGB Solar Landscape Spotlights User Manual

Consciot 10LEDS RGB Solar Landscape Spotlights

SPECIFICATION

INTRODUCTION

The solar landscape spotlights can automatically detect changes in the brightness of the external environment. When the brightness is low enough, it will automatically switch from energy-saving mode to lighting mode without motion detection (Auto on at night / Auto off at sunrise).

PACKAGE CONTENTS

1. A 2 x Solar Landscape Spotlight
2. B 2 x Plastic Anchor
3. C 2 x Plastic rod
4. D 2 x turn-knob
5. E 6 x Gecko screw
6. F 6 x Screws
7. G 1x User Manual

• Note : IF 4 Pack, content A~F will double. IF 6 pack, content A~F will triple.

INSTALLATION

Press the red button and select the desired mode. Then choose a place that can get enough sunshine to install the light, the more sunshine it gets, the longer it can illuminate.

Method 1: Ground Inserted

1. Connect the ground stake with the light.
2. Then, adjust the angle of lamp holder and tighten the knob. 2 Insert the whole light into the ground vertically.

Note : Please insert the turn-knob from the correct side as shown above.

Method 2: Wall Mounted

1. Punch two holes on the wall with a drill bit and insert the attached wall plugs into holes. Then, twist the screws through the screw holes of holder into the wall plugs.
2. Adjust the angle, then tighten the holder and the light through the knob screw. Adjustable Angle: horizontal 180° vertical 90 °

Note : Please insert the turn-knob from the correct side as shown above.

OPERATION GUIDE

The default mode of the product is OFF mode. Press the red button to adjust modes when using the light.

3 LIGHTING MODES

Press the power button, turn on the solar landscape light. It will charge but not light up in the day and automatically be on in darkness or at night. Press once to switch among colors under below 3 Modes in a sequence:

• Solid Color Mode
  Red, Green, Blue, Max working time: 12 hours.

• Mix Color Mode
  Red & Green, Red & Blue, Green & Blue, Max working time: 12 hours.

• Color Cycling Mode
  The solar light will change the color gradually in a cycle. Max working time: 12 hours.

• OFF
  On the basis of Color Cycling Mode, press the power button again, the pathway light will power off.

WARM TIPS

1. It is recommended to turn off the light and charge it under direct sunlight for48 hours before the first use. Make sure the product has enough power. Please note that the working time of the solar lamp may vary due to weather changes. In rainy days, cloudy, or in winter with insufficient light. The working time will be shortened.
2. During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
3. Whether the solar landscaping spotlights can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons and other conditions.

TROUBLESHOOTING

If the light failed to turn on, please

1. check if there is any light source around;
2. charge the light for a while and then cover the solar panel to have a test;
3. make sure you hear a clear “click” sound when you press the button.

Consciot
Our goal is to bring you the best shopping experience on Amazon. If you have any questions about our product, please feel free to contact us. Our customer service is right here to resolve the case.

• Tel: +1 866-698-6211 (PST 9:00am-5:00 pm, Monday to Friday)
• Email:support@consciot.com
• Web:http://www.consciot.com
• FB Twitter @Consciot
• Why not share your stories to help other buyers?

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>