kogan KHSTVQCDONB Agora Smart HDMI TV Dongle User Manual
- June 17, 2024
- Kogan
Table of Contents
KHSTVQCDONB Agora Smart HDMI TV Dongle
User Manual
Usage Notes
- Thank you for purchasing this product, the operational guidelines below contains important information about safe and proper use of this device to avoid accidents, so please read the instructions carefully before use.
- Keep the device away from high temperatures or damp and dusty conditions.
- Avoid dropping, falling or intense collision.
- Do not switch off the power while in the process of upgrading or uploading/downloading the firmware, as it may cause program error.
- Do not disassemble or clean unit with alcohol or other harsh cleaning fluids.
- The manufacturer reserves the right to improve the product, if the specification or design is changed, without prior notice.
- Disclaimer: The manufacturer only assumes responsibility for the product’s service and maintenance , but not for the data loss and other joint liabilities in the process of use.
- The device is not waterproof.
- Pictures listed in this manual are for reference only.
USAGE
1.1 Connecting the device
Insert the HDMI plug into your TV or other display device via the HDMI port,
and enable the signal route for this connected HDMI port on TV.（Please refer
to TV guidelines for instructions on how to do this). 
Connect Micro USB port with original power adapter;
The USB port works with 2.4GHZ devices, such as a mouse, keyboard, USB flash
drive etc.
(Note: The connection diagram only for reference purpose, there may be small
differences in the product models, so please take this into consideration.)
GETTING STARTED
2.1 Turn on the device
Plug in the power, the LED indicator will light up and the device will be
switched on automatically.
The user can install their own input
software and check the option of this input method.
While setting this option, you can select your favourite method by clicking on
input area, and then clicking the keyboard’s bottom-right corner to show a
list of all input methods.
2.4 Wireless
network connection
Enter setup, turn on WIFI, click on the desired wifi hot spot, and input
password of the wireless router for connection (A WIFI icon will pop up on the
status bar after connection).
Note：For best results, please ensure that the wireless router has access to
external internet.
Install/Uninstall APK
Installing from an unknown source
Please use Google market as the source for APK files as much as possible, when
installing APK from other sources, please go to settings > security > check
the option of unknown source.
Installing APK
From local documents:
a) Copy the downloaded APK to USB flash drive, hard drive or SD card etc, then
connect to the TV box.
b) Go to“APK installing widget”, select the desired APK, and click install
(dependent on memory device connected).
From the internet:
Option 1：Download APK from internet APK stores (the filename extension is
.APK), and then click install (if the downloading is performed through a
browser, the status bar will show an icon of completion after the download,
click it to install).
Option 2：Install the APK of other Android application market first, and then
download from it directly.
2.5 Uninstall APK
a) Settings > APK > Manage APK, a list of installed APK pops up.
b) Click “uninstall” to remove the APK
2.6 Turning your mobile phone into a remote control
Install a “remote control.apk” that is developed specifically for the device
on the mobile phone. Connect both the phone and the device to a same wireless
router, then open this APK from the phone. A list of optional devices should
then appear. (Note: this feature works only with an Android mobile
phone)
2.7 DLNA / Miracast
DLNA (Digital Living Network Alliance)
The mobile phone and this device are connected to the same local network
(connected to same wireless router)；Install Youtube, PPTV or other video
player supporting DLAN protocol on the phone, open the APK and play 1 video
programme, click on from playing interface > , and then click . Miracast
Currently supported only by mobile phones and Tablet PCs powered by Android
4.2 or above, and the method for connection varies for different devices.
Generally go to settings—display, or WI-FI – sensor setting.
Go to WI-FI on the phone, select settings—WIFI—WIFI DISPLAY.
Select your device (device name is shown upon access of WIFI DISPLAY), after
connection, the contents on mobile phone are streamed to TV display.
TROUBLESHOOTING
What do I do if a screen problem appears, such as black screen, splash screen
etc?
Check if the TV is powered on or the correct input/signal route is enabled. If
a HDMI cable is plugged into HDMI port 2 on TV, the signal route for this port
should be enabled, and also make sure that the terminal of the HDMI cable is
undamaged.
There is no access to internet after connecting to wireless router.
Check if the wireless router works well；confirm that the internet is working
for other devices.
A problem of stuttering/stagnant video appears while playing online videos.
This is due to a limited internet access speed.
There is no sound for AV output?
Please check if the sound is muted on TV, or the video’s sound is normal when
played on a computer.
The multimedia files are not found on SD card or USB flash drive?
Please check if the connection with these memory devices is steady. Confirm
that the files are working correctly on another device.
The device is stuck on boot screen.
The device has crashed, and if the remote control does not work at this
moment, just disconnect the power and reboot the device.
- Please contact the Kogan customer support team if you have any other questions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>