nVent 150M1000EG 150M Standard U Bolt Owner’s Manual
- September 6, 2024
- nVent
Table of Contents
nVent 150M1000EG 150M Standard U Bolt
Specifications
- Catalog Number: 150M1000EG
- Material: Steel
- Finish: Electrogalvanized
- Pipe Size: 10
- Outer Diameter (OD): 10 3/4
- Rod Size (RS): 3/4
- Screw Length (L): 4
- A: 14 9/16
- B: 11 1/2
- Static Load (F): 4830lb
Product Information
The 150M Standard U-Bolt is made of steel with an electro-galvanized finish. It is designed for use with 10-inch pipes, has an outer diameter of 10 3/4 inches, and a rod size of 3/4 inches. The U-Bolt has a screw length of 4 inches and can withstand a static load of up to 4830lb.
Product Usage Instructions
- Installation: Follow nVent’s product instruction sheets and training materials available at www.nvent.com. Improper installation may cause product malfunction or property damage.
- Usage: Use the U-Bolt only as indicated in the instructions. Misuse or misapplication may result in serious bodily injury or death.
- Maintenance: Regularly inspect the U-Bolt for any signs of wear or damage. Replace if necessary to ensure safety.
FAQ
- Q: Can the U-Bolt be used for outdoor applications?
- A: Yes, the electro-galvanized finish provides corrosion resistance, making it suitable for outdoor use.
- Q: What is the maximum load capacity of the U-Bolt?
- A: The U-Bolt can withstand a static load of up to 4830lb.
FEATURES
- Pipe support for general piping applications
- Comes complete with 4 nuts (2 installed on each end)
- Conforms with Federal Specification WW-H-171 (Type 24), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 24)
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Electrogalvanized
- Pipe Size: 10″
- Outer Diameter (OD): 10 3/4″
- Rod Size (RS): 3/4″
- Screw Length (L): 4″
- A: 14 9/16″
- B: 11 1/2″
- Static Load (F): 4830lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty
Contact
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our powerful portfolio of brands
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent