Nekteck NK-NM08 Vibration Neck Massager With Heat User Manual

NK-NM08 Vibration Neck Massager With Heat
User Manual

Important Safeguards for Safety

WARNING
FOR ADULT USE ONLY
IMPORTANT: Any individual who may be pregnant, has a pacemaker, suffers from phlebitis and/or thrombosis, is at an increased risk of developing blood clots, or who has pins/screws/ artificial joints or other medical devices implanted in his/her body should consult with a physician before using a massaging device designed for home use. If the HEAT is too strong for you, please switch the heat off.

• Do not use on an infant.

• Do not use on sensitive skin.
  CAUTION

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER THERE ARE NO SERVICEABLE PARTS INSIDE.

• TO RAIN THE RISK OF FIRE OR ELECTRIC SHOOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS
All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. When using an electrical appliance, basic precautions should always be followed, including the following:
DANGER – To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
Do not reach for an appliance that has fallen into water, Unplug immediately.
Do not use it while bathing or in a shower.
Do not place or store appliances where it can fall or into a tub or sink.
Do not place in or drop into water or other liquid.
Never use pins or other metallic fasteners with this appliance.
Carefully examine the covering before each use. Discard the appliance if the covering shows any signs of deterioration, such as checking or cracking.
Keep dry. Do not operate in a wet or moist environment.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
An appliance should never be left unattended when plugged in. Unplug from the outlet when not in use, and before putting on or taking off parts.
Close supervision is necessary when this appliance is used by, on or near children,invalids, or disabled persons.
Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly,  if it has been dropped or damaged, or dropped into water.
DO NOT attempt to fix it yourself. Return the appliance to a service center for examination and repair.
Do not carry this appliance by its supply cord or use the cord as a handle.
Do not crush or fold this appliance when storing.
Keep the cord away from heated surfaces.
Never drop or insert any object into any opening.
Do not use outdoors. This appliance is intended for household, indoor and car use only.
To disconnect, set all controls to the off position, then remove plug from the outlet.
Do not overload the electrical outlet. Use only the power source as indicated.
To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance.
Incorrect repair can cause risk of electric shock or injury while using.
SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY

Getting To Know Your Neck and Back Massager

1. Product Diagram
   1| Main Unit
   ---|---
   2| Vibration Nodes
   3| Control Panel
   4| Power ON/OFF
   5| Vibration Mode
   6| Speed Control
   7| Heat ON/OFF
   8| Heating Indicator Light
   9| Adapter
   10|  Car Power Plug

2. Product Packaging Contents Packaging Contents
   1× Nekteck Vibration Neck Massager with Heat
   1× AC Power Adapter {UL Listed)
   1× User Manual
   1× Car Power Plug

3.  Product Parameter Specifications
   Product Name| Nekteck Vibration Neck Massager with Heat
   ---|---
   Model Number| NK-NM08
   Power Supply| 110-240V/60Hz
   Power Consumption| 12V-l.5A
   Dimensions| 13.78 x 5.12 x 4.72 in/35cm x 13cm x 12cm
   Weight| 3.3lbs/l.5kg

Before First Use

1. Carefully unpack the massager and remove any packaging material.
2.  Check the power cord and plug for any damage before use.
3.  Find a comfortable and quiet place to sit and wear the massager
4. Turn on the massager and select the desired massage mode.
5.  If you experience any discomfort or pain during use, stop using it immediately.
6.  Do not use it on open wounds, swollen or inflamed areas, or areas with skin conditions.
7.  Keep the massager away from water and do not use it in damp or wet conditions.
8.  Do not use it while sleeping or if you have a pacemaker or any other medical device implanted.
9.  Please consult with your doctor before using it if you have any medical conditions.
10. When not in use, disconnect the power cord and store it in a cool and dry place.

Operation Instructions

1. The main function of this product is to provide heated vibration massage for the shoulder and neck area, with applicability to multiple body parts.
2. There are 3 selectable modes, with the default mode being high-frequency continuous vibration. You can switch between modes using the mode button, which includes high-frequency continuous vibration, low-frequency deep vibration, and high-frequency intermittent vibration.
3. The intensity can be adjusted across three levels to meet different intensity preferences. The default setting is the low-intensity mode, and you can switch between intensity levels using the intensity button, which includes low-intensity, medium-intensity, and high-intensity modes.
4. here are 2 heating options available. The default setting is the low-level heat(indicated by a blue light). You can switch to the high-level heat (indicated by a red light) or turn off the heating function by using the heating button.

POWER BUTTON ( )|
---|---
MODE BUTTON ( )| The default is high-frequency continuous vibration when booting
[high-frequency continuous vibration] [low-frequency deep vibration] [high- frequency intermittent vibration]
INTENSITY BUTTON ( )| The default is low-intensity when booting (low] [medium] [high)
HEATING MODE ( )| The default is low-level heat when booting
[low] Low gear working temperature is about 107F-117F.
(high) High gear working temperature is about 115°F-125°F.
HEATING INDICATOR LIGHT (0)| Low-level [blue light] High-level [red light] Turn off the heat [light off]

Care & Maintenance

1. Place the massager in a safe, cool and dry place when not in use.
2.  After unplugging, wipe with a soft, damp cloth using non-abrasive cleaners.
3.  Never submerge the unit in any liquid.
4. Keep away from all solvents and harsh detergents.
5.  DO NOT attempt to repair this massager. There are no user-serviceable parts.

Troubleshooting

outlet
The adapter is not plugged incorrectly| Unplug the adapter and plug it in again
Power is off| Push the on button to turn the massager on
No power| Try a different power outlet or check the car power socket
Faulty adapter| Plug the massager to your car’s port using the included car adapter to verify the issue.
Massager is turning off on its own| Power plug is loose| Follow the instructions above and check the connections, adapters and sockets.
The 15-minute timer went off| The massager has a timer and will turn off on its own after 15 minutes. You can push the power button to start another 15-minute session.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance require­ mints, please follow operation instructions as documented in this manual. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
Warranty Information
We grant a 1-year warranty on the product commencing on the date of purchase. Within the guarantee period, we will eliminate any defects in the appliance resulting from faults inmaterials or workmanship. Please contact us at: support@neketck.com to launch a warranty claim.
This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.
Customer Support
If you have any product questions or concerns, please don’t hesitate to contact us directly at support@nekteck.com.
We have a hassle-free warranty and customer service team for satisfactory solutions to any issue you might have.

Read this manual thoroughly before using and save it for future reference
Questions or Concerns?
Contact us at support@nekteck.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>